Unofficial File parts/89679.dat
File Header:
0 Technic Panel Curved 1 x 2 x 1
0 Name: 89679.dat
0 Author: Gerald Lasser [GeraldLasser]
0 !LDRAW_ORG Unofficial_Part
0 !LICENSE Redistributable under CCAL version 2.0 : see CAreadme.txt
0 BFC CERTIFY CCW
0 !HISTORY 2022-07-24 [GeraldLasser] Adapted to use subfile
Status:
1 subfile isn't certified. (CSN)
Size: 746 bytes
Reviewers' certifications:
MMR1988=certify
Required (unofficial) subfiles:
Needs more votes. (CN)Related (unofficial) subfiles:
(none)
File reviews and updates:
At Thu Feb 17 15:35:01 2022, the file was initially submitted.
Submitted by: GeraldLasser
Comments:
as seen on the new boxes and Mclaren shots
Submitted by: GeraldLasser
Comments:
as seen on the new boxes and Mclaren shots
At Thu Feb 17 16:00:01 2022, the following review was posted:
Reviewer: Philo
Certification: certify
No comments were posted with this review.
Reviewer: Philo
Certification: certify
No comments were posted with this review.
At Sun Mar 13 09:10:01 2022, the following review was posted:
Reviewer: MMR1988
Certification: certify
No comments were posted with this review.
Reviewer: MMR1988
Certification: certify
No comments were posted with this review.
At Tue Jul 19 18:50:01 2022, the following review was posted:
Reviewer: jb70
Certification: novote
Comments:
Hi Gerald,
I think, there should be added 2 erings to avoid gaps around the axle hole when using primitive substitution:
1 16 0 0 10 0 0 6 6 0 0 0 -1 0 4-4ering.dat
1 16 0 0 -10 0 0 6 6 0 0 0 1 0 4-4ering.dat
And I submitted a subfile (s\89679s01.dat) without side, since there is at least one printed part of this one in 42143 Ferrari Daytona SP3 (89679pt0.dat) where I used the subfile.
I already added the erings to the subfile. I needed to reduce the 3-4cyclo and 3-4ring2 primitives to 5-8 to get free space to include the printed pattern.
Please review the subfile and think about to reuse the subfile in this part as well.
Reviewer: jb70
Certification: novote
Comments:
Hi Gerald,
I think, there should be added 2 erings to avoid gaps around the axle hole when using primitive substitution:
1 16 0 0 10 0 0 6 6 0 0 0 -1 0 4-4ering.dat
1 16 0 0 -10 0 0 6 6 0 0 0 1 0 4-4ering.dat
And I submitted a subfile (s\89679s01.dat) without side, since there is at least one printed part of this one in 42143 Ferrari Daytona SP3 (89679pt0.dat) where I used the subfile.
I already added the erings to the subfile. I needed to reduce the 3-4cyclo and 3-4ring2 primitives to 5-8 to get free space to include the printed pattern.
Please review the subfile and think about to reuse the subfile in this part as well.
At Wed Jul 20 16:05:01 2022, the following review was posted:
Reviewer: GeraldLasser
Certification: novote
Comments:
may be we should remove
4 13 8.3151 3.4443 10 6.3639 6.3639 10 4.2426 4.2426 10 5.543 2.296 10
3 13 8.3151 3.4443 10 5.543 2.296 10 5.602 2 10
4 13 8.3151 3.4443 10 5.602 2 10 6 0 10 9 0 10
4 13 5.543 2.296 -10 4.2426 4.2426 -10 6.3639 6.3639 -10 8.3151 3.4443 -10
3 13 5.543 2.296 -10 8.3151 3.4443 -10 5.602 2 -10
4 13 6 0 -10 5.602 2 -10 8.3151 3.4443 -10 9 0 -10
plus some lines
from the s01 subfile, this would
A) help draw patterns as you require them
B) also help to add a fine curve in the plain part (add a 1-8 chrd etc)
Reviewer: GeraldLasser
Certification: novote
Comments:
may be we should remove
4 13 8.3151 3.4443 10 6.3639 6.3639 10 4.2426 4.2426 10 5.543 2.296 10
3 13 8.3151 3.4443 10 5.543 2.296 10 5.602 2 10
4 13 8.3151 3.4443 10 5.602 2 10 6 0 10 9 0 10
4 13 5.543 2.296 -10 4.2426 4.2426 -10 6.3639 6.3639 -10 8.3151 3.4443 -10
3 13 5.543 2.296 -10 8.3151 3.4443 -10 5.602 2 -10
4 13 6 0 -10 5.602 2 -10 8.3151 3.4443 -10 9 0 -10
plus some lines
from the s01 subfile, this would
A) help draw patterns as you require them
B) also help to add a fine curve in the plain part (add a 1-8 chrd etc)
At Thu Jul 21 21:20:01 2022, the following review was posted:
Reviewer: jb70
Certification: novote
Comments:
I changed the subfile as suggested.
Now the main file could be reduced to:
1 16 0 0 0 1 0 0 0 1 0 0 0 1 s\89679s01.dat
1 16 0 0 -10 3 0 0 0 0 3 0 1 0 1-8ring2.dat
1 16 0 0 10 3 0 0 0 0 3 0 -1 0 1-8ring2.dat
1 16 0 0 10 9 0 0 0 0 9 0 -20 0 1-8cylo.dat
1 16 8.668 -4.279 0 -.332 0 0 -4.279 1 0 0 0 -10 rect2p.dat
1 16 7.3505 -12.7645 0 .9855 0 0 4.2065 1 0 0 0 10 rect2p.dat
1 16 4.743 -21.0335 0 -1.622 0 0 -4.0625 1 0 0 0 -10 rect2p.dat
1 16 2.1745 -26.7235 0 .9465 0 0 1.6275 1 0 0 0 10 rect2p.dat
Reviewer: jb70
Certification: novote
Comments:
I changed the subfile as suggested.
Now the main file could be reduced to:
1 16 0 0 0 1 0 0 0 1 0 0 0 1 s\89679s01.dat
1 16 0 0 -10 3 0 0 0 0 3 0 1 0 1-8ring2.dat
1 16 0 0 10 3 0 0 0 0 3 0 -1 0 1-8ring2.dat
1 16 0 0 10 9 0 0 0 0 9 0 -20 0 1-8cylo.dat
1 16 8.668 -4.279 0 -.332 0 0 -4.279 1 0 0 0 -10 rect2p.dat
1 16 7.3505 -12.7645 0 .9855 0 0 4.2065 1 0 0 0 10 rect2p.dat
1 16 4.743 -21.0335 0 -1.622 0 0 -4.0625 1 0 0 0 -10 rect2p.dat
1 16 2.1745 -26.7235 0 .9465 0 0 1.6275 1 0 0 0 10 rect2p.dat
At Sun Jul 24 07:00:01 2022, the following review was posted:
Reviewer: MagFors
Certification: hold
Comments:
Should use the subfile.
btw,
is there a way to find subfiles that are used in a patterned part, but is not used in the unpatterned version of the part?
IMHO it's bad practice to derive a new subfile from an existing part and then not update the file it came from.
Reviewer: MagFors
Certification: hold
Comments:
Should use the subfile.
btw,
is there a way to find subfiles that are used in a patterned part, but is not used in the unpatterned version of the part?
IMHO it's bad practice to derive a new subfile from an existing part and then not update the file it came from.
At Sun Jul 24 16:25:01 2022, a new version of the file was submitted.
Submitted by: GeraldLasser
Comments:
used subfile
Existing certification-votes were deleted.
Submitted by: GeraldLasser
Comments:
used subfile
Existing certification-votes were deleted.
At Wed Jan 4 06:50:01 2023, the following review was posted:
Reviewer: MMR1988
Certification: certify
No comments were posted with this review.
Reviewer: MMR1988
Certification: certify
No comments were posted with this review.
At Wed Jan 4 21:30:02 2023, a new version of the file was submitted.
Submitted by: jb70
Comments:
Replaced rect2p by quads and moved lines to subfile
Existing certification-votes were deleted.
Submitted by: jb70
Comments:
Replaced rect2p by quads and moved lines to subfile
Existing certification-votes were deleted.
At Thu Jan 5 07:35:01 2023, the following review was posted:
Reviewer: MMR1988
Certification: certify
No comments were posted with this review.
Reviewer: MMR1988
Certification: certify
No comments were posted with this review.
3D View