0 Windscreen 6 x 4 x 1.333 Curved with "Ford" Text and White and Red Roof Pattern (Needs work) 0 Name: 18973p07.dat 0 Author: Massimo Maso [Sirio] 0 !LDRAW_ORG Unofficial_Part 0 !LICENSE Redistributable under CCAL version 2.0 : see CAreadme.txt 0 BFC CERTIFY CCW 0 // Needs Work: the drawing is complete but it may not correspond perfectly to the physical part. 0 // It is based only on photos, it has not yet been possible to compare it with a real component.
Size: 62361 bytes
Submitted by: Sirio
In an initial phase I would like to talk only about the graphic aspect and the dimensions of the decorations.
Surely there will be errors of realization, but at least at the beginning it is useless to check that all the triangles are correctly connected for 0.0001 if then it is necessary to move a line of 1 or more unit.
Width of stripe 7
48 sided circle is the same of p04: centre (0 -11.892) radius 39.8339
Text Height 8 centered on the band and disposed on a circle centre (0 -23.892) radius 39.8339.
Letters width 7 and spaced of 7
Projected along y axis with SlicerPro.exe
No comments were posted with this review.
Line 294: Coplanarity. 4 4 -18.2669 3.379907 -42.82709 -17.35385 4.351342 -47.65663 -15.24 4.511856 -48.7 -12.25014 4.616074 -49.71279
some invisible condlines
.... a lot of vertices that could be melted
The pattern on p02, the only one I have, was very wrong in position.
I don't want to Hold-vote these on a suspicion, but I want to make clear that the position might be very wrong too.
Could someone please check the position of the pattern?
Submitted by: Sirio
I added the note Needs work, in the description and inside the part, to try to unlock the situation.
As done for other parts, we could approve a partial version with the possibility of making it definitive in the future. Especially since any changes do not affect the coupling of the component with other pieces, but only the graphic aspect.
I eliminated also some useless vertex and joined some faces, based on the notes made.
I send to Chris a new version of the reference part, because I moved the conditional lines from the main part to the subpart as is being done elsewhere (43898, 65633).
This allows to reduce the dimensions of the patterned parts and the possibility of errors.
On this occasion I also made some small changes (cancellation of some conditiona lines) that were incorrect in LDPE.
some error indications in the printed parts were due to the conditional lines of the reference part which were in excess and had been copied as they were.
Existing certification-votes were deleted.