Unofficial File parts/18396p01.dat
File Header:
0 Constraction Flame 3.5 x 12 with Axle with Orange and Bright Light Yellow Highlight Pattern
0 Name: 18396p01.dat
0 Author: Gerald Lasser [GeraldLasser]
0 !LDRAW_ORG Unofficial_Part
0 !LICENSE Redistributable under CCAL version 2.0 : see CAreadme.txt
0 BFC CERTIFY CCW
0 !KEYWORDS Tribal, Swirl
0 !KEYWORDS Bricklink 18396pb01
Status:
1 'hold' vote. (HSSSSSSSN)
Size: 1488 bytes
Reviewers' certifications:
GeraldLasser=novote MMR1988=novote MagFors=hold Philo=novote
Required (unofficial) subfiles:
Needs more votes. (N)
Related (unofficial) subfiles:
(none)
File reviews and updates:
At Wed Jul 28 08:40:01 2021, the following review was posted:
Reviewer: MagFors
Certification: hold
Comments:
Why are all sections coloured? I think one has to be colour 16, maybe the base? In all 3 patterned versions.
Subfile s01have red condlines.
Why does it get yellow edgelines when I have the texmap ON in LDView? Don't remember seeing that before.
Could it be that something has been changed in LDView?
Reviewer: MagFors
Certification: hold
Comments:
Why are all sections coloured? I think one has to be colour 16, maybe the base? In all 3 patterned versions.
Subfile s01have red condlines.
Why does it get yellow edgelines when I have the texmap ON in LDView? Don't remember seeing that before.
Could it be that something has been changed in LDView?
At Wed Jul 28 09:20:01 2021, the following review was posted:
Reviewer: GeraldLasser
Certification: novote
Comments:
that wa my thought as well, I have tried now with an Alpha-Channel for the transparencey on the PNG. Seems to work, so I can use Colour 16 and overlay the pattern.
I need to play around to which extend the pattern then shall be red... or make the whole part in the base colour and only go with transparency, need to check.
LDView:
I think there is an issue whenusing TEXMAP. There is an Offset-slider. if this is not to the left, I get red artefacts onthe edge lines, even on parts that do not use TEXMAP. Even if it the sldier is to the extreme left, some red artefacts are still there. I will post the screenshots in the forum and ask Travis,
Also back and fourth looks different, but that can be me using TEXTMAP as well...
Reviewer: GeraldLasser
Certification: novote
Comments:
that wa my thought as well, I have tried now with an Alpha-Channel for the transparencey on the PNG. Seems to work, so I can use Colour 16 and overlay the pattern.
I need to play around to which extend the pattern then shall be red... or make the whole part in the base colour and only go with transparency, need to check.
LDView:
I think there is an issue whenusing TEXMAP. There is an Offset-slider. if this is not to the left, I get red artefacts onthe edge lines, even on parts that do not use TEXMAP. Even if it the sldier is to the extreme left, some red artefacts are still there. I will post the screenshots in the forum and ask Travis,
Also back and fourth looks different, but that can be me using TEXTMAP as well...
At Wed Jul 28 09:55:02 2021, the following review was posted:
Reviewer: GeraldLasser
Certification: novote
Comments:
Tried a bit: It works well using an alpha-channel, so I will change them in the later in the evening.
Reviewer: GeraldLasser
Certification: novote
Comments:
Tried a bit: It works well using an alpha-channel, so I will change them in the later in the evening.
At Thu Feb 24 21:30:01 2022, the following review was posted:
Reviewer: MagFors
Certification: hold
Comments:
bump?
Reviewer: MagFors
Certification: hold
Comments:
bump?
At Fri Feb 25 00:10:01 2022, the following review was posted:
Reviewer: GeraldLasser
Certification: novote
Comments:
yep...
Reviewer: GeraldLasser
Certification: novote
Comments:
yep...
At Wed Jun 22 13:35:02 2022, the following review was posted:
Reviewer: Philo
Certification: novote
Comments:
Description lacks "Pattern"
Reviewer: Philo
Certification: novote
Comments:
Description lacks "Pattern"
At Sat Dec 10 14:20:01 2022 a Parts Tracker Admin edited the header.
At Sat Dec 10 14:20:01 2022, the following review was posted:
Reviewer: MMR1988
Certification: novote
Comments:
Added "Pattern" to the description.
Reviewer: MMR1988
Certification: novote
Comments:
Added "Pattern" to the description.
3D View