Unofficial File parts/t43111.dat
part image
File Header:
0 | Hubelino  2 x  2 Track
0 Name: t43111.dat
0 Author: Rolf Osterthun [Rolf]
0 !LDRAW_ORG Unofficial_Part
0 !LICENSE Redistributable under CCAL version 2.0 : see CAreadme.txt

0 BFC CERTIFY CCW

0 !CATEGORY Brick
0 !KEYWORDS Duplo

Status:
5 subfiles aren't certified. (CCSSSSSN)
Size: 1478 bytes
Reviewers' certifications:
Philo=certify
Steffen=certify
Required (unofficial) subfiles:
~| Hubelino Outer End
Status: Needs more votes. (CN)
~| Hubelino Inner End
Status: Needs more votes. (CN)
~| Hubelino Stud Tube Straight Track
Status: Needs admin review. (CCN)
~| Hubelino Reinforcement Straight Track Side
Status: Needs admin review. (CCN)
~| Hubelino Reinforcement Straight Track End
Status: Needs admin review. (CCN)
Related (unofficial) subfiles:
(none)
File reviews and updates:
At Fri Jan 11 22:35:02 2019, the file was initially submitted.
Submitted by: Rolf
Comments:
Third Party Part
Duplo compatible
see: https://hubelino.com/marble-run.html
see: https://forums.ldraw.org/thread-23128.html

At Sat Jan 12 07:15:01 2019, the following review was posted:

Reviewer: Philo
Certification: novote
Comments:
- Where does "43111" comes from? AFAIK txxxx part ranges have only 4 digits?
- Suggest to add a "Duplo" keyword

At Sat Jan 12 07:45:01 2019, the following review was posted:

Reviewer: Philo
Certification: hold
Comments:
Missing a ~ in front of description (subpart)
A lot of needless triangles in flat areas (Intersector usage? Was never happy with its clumsy triangulation...). Needless vertices should be merged, now easy with LDPE.
But... This approach will result in bad smoothing, and can't properly use primitive substitution. The design below will produce a much better looking result. Granted, there is some volume interpenetration, but it doesn't matter since the parts are not transparent.

1 16 0 4 36 36 0 0 0 0 32 0 -72 0 48\2-4cyli.dat
1 16 0 44 0 14 0 0 0 1 0 0 0 14 4-4edge.dat
1 16 0 44 0 16 0 0 0 1 0 0 0 16 4-4edge.dat
0 BFC INVERTNEXT
1 16 0 44 0 14 0 0 0 -8 0 0 0 14 4-4cyli.dat
0 BFC INVERTNEXT
1 16 0 36 0 14 0 0 0 -2.6 0 0 0 14 1-4cyls2.dat
0 BFC INVERTNEXT
1 16 0 36 0 -14 0 0 0 -2.6 0 0 0 14 1-4cyls2.dat
0 BFC INVERTNEXT
1 16 0 36 0 14 0 0 0 -2.6 0 0 0 -14 1-4cyls2.dat
0 BFC INVERTNEXT
1 16 0 36 0 -14 0 0 0 -2.6 0 0 0 -14 1-4cyls2.dat
1 16 0 44 0 16 0 0 0 -8 0 0 0 16 4-4cyli.dat
1 16 0 36 0 16 0 0 0 -3.5 0 0 0 16 1-4cyls2.dat
1 16 0 36 0 -16 0 0 0 -3.5 0 0 0 16 1-4cyls2.dat
1 16 0 36 0 16 0 0 0 -3.5 0 0 0 -16 1-4cyls2.dat
1 16 0 36 0 -16 0 0 0 -3.5 0 0 0 -16 1-4cyls2.dat
1 16 0 44 0 -2 0 0 0 -1 0 0 0 2 4-4ring7.dat
2 24 4.698 35.7248 -13.0658 5.3578 35.6082 -12.9346
2 24 0 36 -14 4.698 35.7248 -13.0658
2 24 -4.698 35.7248 15.0658 0 36 16
2 24 -6.1232 35.473 14.7824 -4.698 35.7248 15.0658
2 24 4.698 35.7248 -15.0658 6.1232 35.473 -14.7824
2 24 4.698 35.7248 -15.0658 0 36 -16
2 24 5.3578 35.6082 12.9346 4.698 35.7248 13.0658
2 24 0 36 14 4.698 35.7248 13.0658
2 24 -4.698 35.7248 -13.0658 0 36 -14
2 24 -4.698 35.7248 -13.0658 -5.3578 35.6082 -12.9346
2 24 -4.698 35.7248 -15.0658 0 36 -16
2 24 -6.1232 35.473 -14.7824 -4.698 35.7248 -15.0658
2 24 -4.698 35.7248 13.0658 0 36 14
2 24 -5.3578 35.6082 12.9346 -4.698 35.7248 13.0658
2 24 4.698 35.7248 15.0658 6.1232 35.473 14.7824
2 24 4.698 35.7248 15.0658 0 36 16
2 24 13.7772 33.5648 7.6273 14.7824 33.1238 6.1232
2 24 16 32.5895 0 14.7824 33.1238 6.1232
2 24 13.7772 33.5648 -1.1204 14 33.467 0
2 24 13.7772 33.5648 1.1204 14 33.467 0
2 24 13.7772 33.5648 -7.6273 14.7824 33.1238 -6.1232
2 24 14.7824 33.1238 -6.1232 16 32.5895 0
2 24 11.3136 34.3071 11.3136 9.3168 34.9088 12.6481
2 24 11.3136 34.3071 11.3136 13.7772 33.5648 7.6273
2 24 9.8994 34.7333 -9.8994 9.3168 34.9088 -10.2888
2 24 9.8994 34.7333 -9.8994 12.9346 33.8187 -5.3578
2 24 13.7772 33.5648 -1.1204 12.9346 33.8187 -5.3578
2 24 9.3168 34.9088 10.2888 9.8994 34.7333 9.8994
2 24 12.9346 33.8187 5.3578 9.8994 34.7333 9.8994
2 24 13.7772 33.5648 1.1204 12.9346 33.8187 5.3578
2 24 11.3136 34.3071 -11.3136 9.3168 34.9088 -12.6481
2 24 13.7772 33.5648 -7.6273 11.3136 34.3071 -11.3136
2 24 6.1232 35.473 14.7824 9.3168 34.9088 12.6481
2 24 5.3578 35.6082 -12.9346 9.3168 34.9088 -10.2888
2 24 5.3578 35.6082 12.9346 9.3168 34.9088 10.2888
2 24 6.1232 35.473 -14.7824 9.3168 34.9088 -12.6481
2 24 -5.3578 35.6082 12.9346 -9.3168 34.9088 10.2888
2 24 -6.1232 35.473 14.7824 -9.3168 34.9088 12.6481
2 24 -5.3578 35.6082 -12.9346 -9.3168 34.9088 -10.2888
2 24 -6.1232 35.473 -14.7824 -9.3168 34.9088 -12.6481
2 24 -9.3168 34.9088 10.2888 -9.8994 34.7333 9.8994
2 24 -12.9346 33.8187 5.3578 -9.8994 34.7333 9.8994
2 24 -12.9346 33.8187 5.3578 -13.7772 33.5648 1.1204
2 24 -9.3168 34.9088 12.6481 -11.3136 34.3071 11.3136
2 24 -11.3136 34.3071 11.3136 -13.7772 33.5648 7.6273
2 24 -9.8994 34.7333 -9.8994 -9.3168 34.9088 -10.2888
2 24 -9.8994 34.7333 -9.8994 -12.9346 33.8187 -5.3578
2 24 -13.7772 33.5648 -1.1204 -12.9346 33.8187 -5.3578
2 24 -9.3168 34.9088 -12.6481 -11.3136 34.3071 -11.3136
2 24 -11.3136 34.3071 -11.3136 -13.7772 33.5648 -7.6273
2 24 -14 33.467 0 -13.7772 33.5648 1.1204
2 24 -14.7824 33.1238 6.1232 -13.7772 33.5648 7.6273
2 24 -16 32.5895 0 -14.7824 33.1238 6.1232
2 24 -14 33.467 0 -13.7772 33.5648 -1.1204
2 24 -13.7772 33.5648 -7.6273 -14.7824 33.1238 -6.1232
2 24 -16 32.5895 0 -14.7824 33.1238 -6.1232
At Sat Jan 12 10:10:01 2019, the following review was posted:

Reviewer: Philo
Certification: novote
Comments:
Sorry, the second review pertains to tube subpart!

At Sat Jan 12 11:10:02 2019, a new version of the file was submitted.
Submitted by: Rolf
Comments:
Chris wrote the following via mail:
"There would be no conflict if you use t43xxx, to match the Hubelino numbers."
I added the KEYWORD. Maybe I should also add a 'Marble Run'?

Existing certification-votes were deleted.
At Sat Jan 12 11:55:01 2019, the following review was posted:

Reviewer: Philo
Certification: novote
Comments:
Fine if Chris is aware that this range of parts is Hubelino reserved. Yes, a Marble Run keyword would be a good thing!

At Sun Jan 13 09:30:01 2019, the following review was posted:

Reviewer: Philo
Certification: certify
No comments were posted with this review.

At Sun May 26 22:00:02 2019, the following review was posted:

Reviewer: Steffen
Certification: hold
Comments:
PT does not show dependency to required subparts
s\t43111s03.dat
s\t43111s05.dat
s\t43111s04.dat
s\t43111s01.dat
s\t43111s02.dat
- there is something unknown broken here

At Mon May 27 10:25:01 2019, the following review was posted:

Reviewer: Steffen
Certification: certify
No comments were posted with this review.