Unofficial File parts/s/u9373s01.dat
part image
File Header:
0 ~Electric Technic Motor Back without Centre Pin Hole
0 Name: s\u9373s01.dat
0 Author: Magnus Forsberg [MagFors]
0 !LDRAW_ORG Unofficial_Subpart
0 !LICENSE Redistributable under CCAL version 2.0 : see CAreadme.txt

0 BFC CERTIFY CCW

Status:
Needs more votes. (CN)
Size: 8320 bytes
Reviewers' certifications:
MagFors=novote
Steffen=certify
Required (unofficial) subfiles:
(none)
Related (unofficial) subfiles:
~Electric Technic Motor Back with Centre Pin Hole
Status: 1 subfile isn't certified. (CSN)
Download: parts/u9373.dat
~Electric Technic Motor Back
Status: 1 subfile isn't certified. (CCSN)
Download: parts/u9376.dat
File reviews and updates:
At Sat Mar 31 16:25:01 2018, the file was initially submitted.
Submitted by: MagFors
At Tue Apr 3 11:25:01 2018, the following review was posted:

Reviewer: rockford
Certification: novote
Comments:
I think it is a good idea, having a common back side of the motor.

I have a few comments for this file so far.
One quad isn't BFC compliant.
I think it would be good if the inner hole could be rectangular.
The thickness of the part that connects the main housing seem to be too thick. To me it looks like it should be around half the thickness.
I think it could use cond-lines (you can take them from the u9376 I submitted recently.
At Tue Apr 3 12:30:00 2018, the following review was posted:

Reviewer: rockford
Certification: novote
Comments:
One more thing I forgot to mention:
Some motors have "4V" text below the two prong-holes.
-Thus it might be necessary to remove a quad there too.

About the thickness I mentioned above: I'm not even sure I have my own thickness correct, but I think it's closer. As far as I know, the thickness is approximately 1mm. I've ordered 4 motors (5 including a 12V), so I'll probably be able to find the exact thickness soon.

At Tue Apr 3 16:50:00 2018, the following review was posted:

Reviewer: Steffen
Certification: novote
Comments:
can we rename this to simply "back" instead of "core"?

At Tue Apr 3 17:00:00 2018, a new version of the file was submitted.
Submitted by: MagFors
Comments:
Made a "4V" text area. The size is a guess. The position is dictated by the size of the larger middle pin hole.
Corrected BFC.
Made lid thinner.
Changed "Core" to "Back"

Please feel free to change this subfile, if you need too.

Existing certification-votes were deleted.
At Wed Apr 4 20:30:00 2018, a new version of the file was submitted.
Submitted by: rockford
Comments:
I suggested making a hole for the '4V' text.
That was a bad idea - it's not necessary, so I closed the hole again. :)
At Wed Apr 4 20:40:00 2018, the following review was posted:

Reviewer: MagFors
Certification: novote
Comments:
OK.

At Sat Dec 29 13:25:01 2018, the following review was posted:

Reviewer: Steffen
Certification: certify
No comments were posted with this review.