Unofficial File parts/s/logolego01.dat
part image
File Header:
0 ~Logo Lego
0 Name: s\logolego01.dat
0 Author: Damien Roux [Darats]
0 !LDRAW_ORG Unofficial_Subpart
0 !LICENSE Redistributable under CCAL version 2.0 : see CAreadme.txt

0 BFC CERTIFY CCW

Status:
Needs more votes. (CN)
Size: 47744 bytes
Reviewers' certifications:
MagFors=certify
Required (unofficial) subfiles:
(none)
Related (unofficial) subfiles:
File reviews and updates:
At Wed Mar 14 00:30:00 2018, the file was initially submitted.
Submitted by: Darats
Comments:
I'm not sure that type of file is allowed, but apparently we don't have a dedicated subpart for the Lego Logo, I thought this could be useful.

At Wed Mar 14 18:15:00 2018, the following review was posted:

Reviewer: MMR1988
Certification: novote
Comments:
As your logo is mutch more detailed I tend to use your logo but without the black frame. Then 99141s02.dat could be updated. The black frame can be added manually in the main file.

Anyway, I think the Logo should get the same orientation like our sticker files.

At Wed Mar 14 19:45:01 2018, the following review was posted:

Reviewer: Darats
Certification: novote
Comments:
Yeah use it everywhere needed was the goal actually.

OK to change orientation.

About the black border, actually from what I ve found official Lego Logo has it, that is why I have integrated it...
I haven t yet try to find all parts with the logo on the pattern, so I don t know yet if the black border is everywhere or not.

At Wed Mar 14 20:35:00 2018, the following review was posted:

Reviewer: arezey
Certification: hold
Comments:
We already have this pattern in s\003432s1.dat. We shouldn't duplicate it.

At Wed Mar 14 21:40:00 2018, the following review was posted:

Reviewer: MMR1988
Certification: novote
Comments:
Santeri that's a wrong reference you mentioned.
This is the new Logo without the yellow area inside the 'O', your reference is the old version. ;-)
At Wed Mar 14 22:40:00 2018, the following review was posted:

Reviewer: MagFors
Certification: hold
Comments:
Yes, this is a duplicate of s\99141s02.dat, but with a lot more vertices.
1400 triangles here, but only 500 in 99141s02
Many of the logo subfiles have this orientation.
At Thu Mar 15 06:45:00 2018, the following review was posted:

Reviewer: arezey
Certification: hold
Comments:
I thought that I specifically referenced the new version... d'oh!

At Thu Mar 15 08:45:00 2018, the following review was posted:

Reviewer: Darats
Certification: novote
Comments:
So what to do.

As we have introduce logos, I think it more relevant to have a dedicated logo sub part not directly linked with a part name. Of course this one would obsolete the others sub parts with the logo.

At Thu Mar 15 09:00:00 2018, the following review was posted:

Reviewer: arezey
Certification: hold
Comments:
It looks like s\99141s02.dat is otherwise equivalent to this pattern except that it has a thicker outer border. Assuming that there is a clear border difference, I'd suggest:

* drop the border from this file and resize the rest of the pattern so that it fits the 20x20 frame
* update s\99141s02.dat so that it has the border and the rest of the pattern is provided by this file
* since there are multiple versions of the logo, the description of this file should be distinguished from them
* since this file is specifically intended to be multi-purpose, maybe it should be a primitive?

At Thu Mar 15 10:20:00 2018, the following review was posted:

Reviewer: Darats
Certification: novote
Comments:
I need to inventory all the existing logos.

About making this a primitive, I would like to have Chris though on it.

At Thu Mar 15 17:00:00 2018, the following review was posted:

Reviewer: MagFors
Certification: hold
Comments:

This is the bast page I've found
http://lego.wikia.com/wiki/LEGO_logo

I think smaller printed logos have a thicker border,
and larger prints have a thinner border.

At Sat May 5 14:10:00 2018, a new version of the file was submitted.
Submitted by: Darats
Comments:
Border removed and logo resized to 20x20

Existing certification-votes were deleted.
At Sat May 5 14:30:01 2018, a new version of the file was submitted.
Submitted by: Darats
At Wed May 9 15:30:00 2018, the following review was posted:

Reviewer: Steffen
Certification: novote
Comments:
I would like better if this lies
flat on the floor like a sticker,
not standing upright

At Wed May 9 16:30:00 2018, the following review was posted:

Reviewer: Darats
Certification: novote
Comments:
I agree 100% but as other logo have been made like that...
Can some others authors give their thoughts?

At Wed May 9 16:50:00 2018, the following review was posted:

Reviewer: Philo
Certification: novote
Comments:
Orientation of subparts is not very important, and I favor consistency between various vesions.

At Sat May 12 09:35:01 2018, the following review was posted:

Reviewer: Darats
Certification: novote
Comments:
So should I be consistent with stickers (horizontal) or with the other logos (which have not been yet officially released BTW) (vertical)?

At Sat May 12 10:00:00 2018, the following review was posted:

Reviewer: Philo
Certification: novote
Comments:
Just checked, several LEGO logo have been released... Most are vertical, two are horizontal. So consistency is not really an issue now!

At Sat Dec 1 21:20:01 2018, the following review was posted:

Reviewer: Darats
Certification: novote
Comments:
As the parts release will come soon, I would like to complete my pending ones. Can someone have a look to this subpart?, I want this one to be certified before reworking others that use this logo.

At Sun Dec 2 10:17:49 2018, the following review was posted:

Reviewer: MagFors
Certification: novote
Comments:
The orientation doesn't matter much.

But howabout the big red area? Shouldn't it be cropped to allow non-square prints?
Is the background allways red?
And how about the yellow line? Does it differ in thickness depending on the actual size of the print?

Compare to how, and why, this one is made.
http://www.ldraw.org/cgi-bin/ptdetail.cgi?f=parts/s/821421bs01.dat
At Thu Dec 6 08:50:01 2018, the following review was posted:

Reviewer: Darats
Certification: novote
Comments:
I don t know. LEGO logo should always have a square red area as a background otherwise it shouldn t be called LEGO logo.

Could someone think about an exemple with the LEGO letters without a red square?

At Sat Feb 23 22:15:01 2019, the following review was posted:

Reviewer: Darats
Certification: novote
Comments:
Let's try to get this one certified, how could I find where this lego logo is used in the current library?

At Sun Feb 24 09:10:01 2019, the following review was posted:

Reviewer: MagFors
Certification: novote
Comments:

The best tool for analyzing the library's content is LDStructure and LDFind from Michael Heidemann
https://ldraw.heidemann.org/index.php?page=ldstructure

At Sun Apr 28 22:50:01 2019, a new version of the file was submitted.
Submitted by: Darats
Comments:
I've added the Black Border as it is how LEGO Logo is supposed to be at the time.

Here are the files that will need an update using this Logo :
- 87079pz5.dat : Tile 2 x 4 with Groove with Lego Logo and White "#LEGOSDCC" Pattern
- 99141p01.dat : ~Electric Mindstorms EV3 Shell Top with LEGO Logo Pattern
- 3068bpt2.dat : Tile 2 x 2 with Groove with LEGO Logo Type 2 Pattern
- 48995pt1.dat : Tile 2 x 3 Rounded with Hole with LEGO Logo Type 2 Pattern


Actually it is basically a replacement of this file :
- s\99141s02.dat : ~Electric Mindstorms EV3 LEGO Logo

Before modifying the already official files, can I have you thoughts ?
Especially from Philo and MagFors as you are the ones that previously used this particular Logo.

Existing certification-votes were deleted.
At Mon Apr 29 19:50:01 2019, the following review was posted:

Reviewer: MagFors
Certification: novote
Comments:
Well, the logo should have a black border, no doubt.
But, as I said above, the thickness of the border varies.

https://img.bricklink.com/ItemImage/PN/3/46413pb004.png
https://img.bricklink.com/ItemImage/PN/3/4215pb025.png
https://img.bricklink.com/ItemImage/PN/3/3188pb002.png
https://img.bricklink.com/ItemImage/PN/1/48995pb10.png

The simple solution might be to add more black quads around a standard logo with thin borders.

At Wed May 1 09:55:01 2019, the following review was posted:

Reviewer: MMR1988
Certification: novote
Comments:
I would prefer a version completely without black surrounding. So it could added in each part without increasing the triangles.

At Tue May 14 21:45:01 2019, a new version of the file was submitted.
Submitted by: Darats
Comments:
Agreed on removing the black border.
It's indeed the easiest way to deal with the different thicknesses of the border.

Existing certification-votes were deleted.
At Sat May 18 13:55:02 2019, the following review was posted:

Reviewer: MagFors
Certification: certify
No comments were posted with this review.