Unofficial File parts/s/98067s02.dat
File Header:
0 ~Animal Dinosaur Lower Jaw Raptor - Teeth Outside Surface
0 Name: s\98067s02.dat
0 Author: Bertrand Lequy [Berth]
0 !LDRAW_ORG Unofficial_Subpart
0 !LICENSE Redistributable under CCAL version 2.0 : see CAreadme.txt
0 BFC CERTIFY CCW
0 !HISTORY 2022-03-06 [MagFors] Rearranged some condlines
Status:

Size: 12789 bytes
Reviewers' certifications:
MMR1988=certify
Required (unofficial) subfiles:
(none)
Related (unofficial) subfiles:
File reviews and updates:
At Sat Jul 31 21:30:01 2021, the following review was posted:
Reviewer: MagFors
Certification: novote
Comments:
Concave surfaces should be made convex:
3 5 -4.942 -3.435 -38.129 -2.992 -2.907 -44.1 -3.922 -6.085 -40.679
3 5 -3.922 -6.085 -40.679 -2.992 -2.907 -44.1 -3.626 -5.733 -42.364
3 5 0 .087 -50.18 0 -2.662 -48.853 -1.674 .052 -49.512
3 5 0 -2.662 -48.853 -1.673 -2.752 -48.608 -1.674 .052 -49.512
4 5 -6.151 -4.443 -28.013 -6.18 -1.641 -31.847 -5.638 -3.769 -33.151 -5.62 -6.429 -29.413
3 5 -5.638 -3.769 -33.151 -5.736 -6.538 -31.457 -5.62 -6.429 -29.413
3 11 0 -4.762 -47.889 -1.673 -4.635 -48.005 0 -2.662 -48.853
Reviewer: MagFors
Certification: novote
Comments:
Concave surfaces should be made convex:
3 5 -4.942 -3.435 -38.129 -2.992 -2.907 -44.1 -3.922 -6.085 -40.679
3 5 -3.922 -6.085 -40.679 -2.992 -2.907 -44.1 -3.626 -5.733 -42.364
3 5 0 .087 -50.18 0 -2.662 -48.853 -1.674 .052 -49.512
3 5 0 -2.662 -48.853 -1.673 -2.752 -48.608 -1.674 .052 -49.512
4 5 -6.151 -4.443 -28.013 -6.18 -1.641 -31.847 -5.638 -3.769 -33.151 -5.62 -6.429 -29.413
3 5 -5.638 -3.769 -33.151 -5.736 -6.538 -31.457 -5.62 -6.429 -29.413
3 11 0 -4.762 -47.889 -1.673 -4.635 -48.005 0 -2.662 -48.853
At Mon Aug 2 09:05:01 2021, a new version of the file was submitted.
Submitted by: Berth
Comments:
Changes done as requested
Existing certification-votes were deleted.
Submitted by: Berth
Comments:
Changes done as requested
Existing certification-votes were deleted.
At Mon Mar 7 16:15:06 2022, a new version of the file was submitted.
Submitted by: MagFors
Comments:
Removed ldd history. It's only needed in the main, unprinted part.
Moved around some condlines.
Each file should have it's own condlines. This will give each coloured surfaces the right colour on the edge/condlines.
(This might not be possible on a detailed patterned/printed part, but is prefered on this type of larger sections in a single colour)
Submitted by: MagFors
Comments:
Removed ldd history. It's only needed in the main, unprinted part.
Moved around some condlines.
Each file should have it's own condlines. This will give each coloured surfaces the right colour on the edge/condlines.
(This might not be possible on a detailed patterned/printed part, but is prefered on this type of larger sections in a single colour)
At Wed Mar 16 21:05:01 2022, the following review was posted:
Reviewer: MMR1988
Certification: certify
No comments were posted with this review.
Reviewer: MMR1988
Certification: certify
No comments were posted with this review.
3D View