Unofficial File parts/s/93221s02.dat
part image
File Header:
0 ~Minifig Ghettoblaster  1 x  3 x  1 - Speaker Grille
0 Name: s\93221s02.dat
0 Author: Massimo Maso [Sirio]
0 !LDRAW_ORG Unofficial_Subpart
0 !LICENSE Redistributable under CCAL version 2.0 : see CAreadme.txt

0 BFC CERTIFY CCW

0 // Quads on sphere: center (0, 0, 90.95), radius 90
Status:
Needs more votes. (CX)
Size: 102727 bytes
Reviewers' certifications:
MagFors=certify
Required (unofficial) subfiles:
(none)
Related (unofficial) subfiles:
~Minifig Ghettoblaster 1 x 3 x 1 without Front Face
Status: 1 subfile isn't certified. (CSX)
File reviews and updates:
At Sun Aug 5 10:05:01 2018, the file was initially submitted.
Submitted by: Sirio
Comments:
At this time I did this part using regular 48-sided spheres.
By doing it, I realized that it could be considerably simplified by making the edges of the sphere coincide with the cutting areas. In this way the facets of the grid would be all simple flat quads.
Now, for example, the central facet is composed of four quads and two other stripes (the third from the center) have a fold line that increases the number of quads needed.

For this reason the file is not completely finished and I referred to it as "Needs work".

At Tue Aug 7 20:10:01 2018 a Parts Tracker Admin edited the header.
At Wed Aug 8 14:40:01 2018, the following review was posted:

Reviewer: MagFors
Certification: novote
Comments:
I think these edges are missing:
2 4 -4.01 -7.48 .84 -4.01 -7.48 1.47
2 4 -7.47 -4.02 .84 -7.47 -4.02 1.47
2 4 7.48 4.01 .84 7.48 4.01 1.47
2 4 4.02 7.47 .84 4.02 7.47 1.47

and indeed, many vertices could be removed.

At Mon Sep 10 16:45:01 2018, a new version of the file was submitted.
Submitted by: Sirio
Existing certification-votes were deleted.
At Thu Sep 20 22:10:02 2018, the following review was posted:

Reviewer: MagFors
Certification: hold
Comments:
I still think these edges are missing:
2 4 -4.01 -7.48 .84 -4.01 -7.48 1.47
2 4 -7.47 -4.02 .84 -7.47 -4.02 1.47
2 4 7.48 4.01 .84 7.48 4.01 1.47
2 4 4.02 7.47 .84 4.02 7.47 1.47

And now also the big edge ring, or should it be in the s03 file?

At Sat Sep 22 11:15:01 2018, a new version of the file was submitted.
Submitted by: Sirio
Comments:
Added missing edge lines;
rounded to 4 digits;
added 4-4edge line in this file, in this way s03 is without lines.

Existing certification-votes were deleted.
At Tue Sep 25 21:30:01 2018, the following review was posted:

Reviewer: MagFors
Certification: certify
Comments:
Is it also missing similar edges, in the other direction?

At Tue Sep 25 21:40:01 2018, the following review was posted:

Reviewer: MagFors
Certification: hold
Comments:
Line 1349: Optional Line like Line found (1494) 5 24 -4.0118 -7.4787 1.7575 -4.0118 -7.4787 0.8252 -4.4194 -7.0711 1.2543 -3.3739 -7.7933 1.7586
Line 1361: Optional Line like Line found (1495) 5 24 -7.4787 -4.0118 0.8252 -7.4787 -4.0118 1.7575 -7.0711 -4.4194 1.7293 -7.7933 -3.3739 1.2836
Line 1382: Optional Line like Line found (1496) 5 24 7.4787 4.0118 0.8252 7.4787 4.0118 1.7575 7.0711 4.4194 1.7293 7.7933 3.3739 1.2836
Line 1394: Optional Line like Line found (1497) 5 24 4.0118 7.4787 1.7575 4.0118 7.4787 0.8252 4.4194 7.0711 1.2543 3.3739 7.7933 1.7586

You need to remove the old condlines when you add edges instead.
LDPE have buttons this type of change; C2L and L2C

At Wed Sep 26 18:55:02 2018, a new version of the file was submitted.
Submitted by: Sirio
Existing certification-votes were deleted.
At Wed Sep 26 19:20:01 2018, the following review was posted:

Reviewer: MMR1988
Certification: certify
No comments were posted with this review.

At Wed Sep 26 19:20:01 2018, the following review was posted:

Reviewer: MMR1988
Certification: hold
Comments:
Line 212: Double lines found (170) 4 16 -4.8614 -6.6291 0.7572 -5.0553 -6.8231 0.8085 -5.1745 -6.7435 0.8138 -6.0104 -6.0104 0.8278
Line 213: Double lines found (171) 4 16 -6.0104 -6.0104 0.8278 -6.7435 -5.1745 0.8138 -6.8231 -5.0553 0.8085 -6.6291 -4.8614 0.7572
Line 249: Double lines found (239) 5 24 2.2097 -6.6291 0.5458 3.2528 -7.853 0.8268 2.2 -8.2104 0.828 3.3739 -7.7933 0.8249

At Thu Sep 27 18:05:01 2018, a new version of the file was submitted.
Submitted by: Sirio
Comments:
Removed double faces;
fixed faces on outer cilinder and stripes.

Existing certification-votes were deleted.
At Thu Sep 27 19:20:01 2018, the following review was posted:

Reviewer: MagFors
Certification: hold
Comments:
Edges must be colour 24.

If this speaker grill never is printed, it could be placed in the s01 subfile twice.

At Thu Sep 27 21:40:01 2018, a new version of the file was submitted.
Submitted by: Sirio
Comments:
For now it does not seem to be colored.
It seems useful to keep it in a separate subpart for not having a large file.

Existing certification-votes were deleted.
At Sun Sep 30 15:10:01 2018, the following review was posted:

Reviewer: MagFors
Certification: certify
Comments:
Just to be clear, I think you should keep this subfile, but place it in the s01 subfile instead.

At Sun Sep 30 16:45:02 2018, the following review was posted:

Reviewer: MMR1988
Certification: certify
Comments:
Yes, keep this subfile. And inline s03 in s01.

At Sun Sep 30 17:20:01 2018, the following review was posted:

Reviewer: MagFors
Certification: certify
Comments:
No, I think that if s03 should be inlined, it should be in the main part, in 93221.
The subfile s03 is rather pointless. It would only be used in the uncoloured part.

At Tue Oct 2 20:55:01 2018, a new version of the file was submitted.
Submitted by: Sirio
Comments:
Subpart restored after deletion due to misunderstanding.
Fixed the name.

Existing certification-votes were deleted.
At Tue Oct 2 21:35:01 2018, the following review was posted:

Reviewer: MagFors
Certification: certify
Comments:

Unused subfiles stay on the Part Tracker until Admin delete them.
Did you change this in any way? I think this upload was unnessesary.