Unofficial File parts/s/87610s01.dat
part image
File Header:
0 ~Minifig Helmet Mandalorian without Front, Side and Top - Half
0 Name: s\87610s01.dat
0 Author: Magnus Forsberg [MagFors]
0 !LDRAW_ORG Unofficial_Subpart
0 !LICENSE Redistributable under CCAL version 2.0 : see CAreadme.txt

0 BFC CERTIFY CCW

0 !HISTORY 2019-10-15 [GeraldLasser] Subfiled further

0 // Bottom Rim

Status:
Certified! (ACCN)
Size: 23274 bytes
Reviewers' certifications:
Holly-Wood=certify
MagFors=certify
cwdee=certify
Required (unofficial) subfiles:
(none)
Related (unofficial) subfiles:
Minifig Helmet Mandalorian
Status: Certified! (ACCN)
Download: parts/87610.dat
File reviews and updates:
At Thu Sep 8 22:00:05 2011, the file was initially submitted.
Submitted by: MagFors
At Thu Sep 13 09:50:02 2018, the following review was posted:

Reviewer: Holly-Wood
Certification: hold
Comments:
Overlay with the Minifig head. I do not understand the purpose of this vertex: 7.2978 20.2919 -16.3077

Could save a lot of triangles on the back rips by merging vertices: example 0 3.1001 17.3525

At Sat Dec 29 17:05:02 2018, a new version of the file was submitted.
Submitted by: MagFors
Comments:
Reworked to better fit a 16-sided head.

Existing certification-votes were deleted.
At Tue Oct 15 21:35:01 2019, a new version of the file was submitted.
Submitted by: GeraldLasser
At Sun Oct 27 22:15:01 2019, the following review was posted:

Reviewer: MagFors
Certification: hold
Comments:
Nice primitive substitution. I like the lo-res prims.

You need to add complementary condlines here:
2 4 2.222 3.375 16.669 2.222 3.624 17.2091
2 4 2.222 3.624 17.2091 2.222 4.225 17.4526
2 4 2.222 4.225 17.4526 2.222 4.826 17.2567
2 4 2.222 4.826 17.2567 2.222 5.075 16.7362
and on all 5 lo-res sphere-cylis

This condline have a bad control point:
5 24 14.2237 3.375 6.1997 15.339 1.5 2.999 14.1717 1.5 6.4152 16.268 15.597 3

I think these could be made better:
5 24 13.2752 17.3 9.203 12.2796 3.375 8.9813 10.4651 3.375 11.455 13.6737 3.375 6.1997
5 24 5.664 3.375 14.9672 6.1232 17.3 15.3367 4.375 17.3 16.141 8.8704 17.3 13.773
5 24 8.8704 17.3 13.773 8.2051 3.375 13.4411 5.664 3.375 14.9672 10.4651 3.375 11.455
5 24 11.3136 17.3 11.7379 10.4651 3.375 11.455 8.2051 3.375 13.4411 12.2796 3.375 8.9813

It looks like you made quite a lot of changes to the ldd data?

At Wed Mar 11 23:05:02 2020, a new version of the file was submitted.
Submitted by: GeraldLasser
Comments:
Added the condlines for the bumps


Those
5 24 13.2752 17.3 9.203 12.2796 3.375 8.9813 10.4651 3.375 11.455 13.6737 3.375 6.1997
5 24 5.664 3.375 14.9672 6.1232 17.3 15.3367 4.375 17.3 16.141 8.8704 17.3 13.773
5 24 8.8704 17.3 13.773 8.2051 3.375 13.4411 5.664 3.375 14.9672 10.4651 3.375 11.455
5 24 11.3136 17.3 11.7379 10.4651 3.375 11.455 8.2051 3.375 13.4411 12.2796 3.375 8.9813

i can only move the control point a to the lower/upper part, but I do not see the improvement
Existing certification-votes were deleted.
At Tue Feb 9 20:20:01 2021, the following review was posted:

Reviewer: Holly-Wood
Certification: certify
Comments:
Quads near coplanarity

At Thu Feb 11 20:30:01 2021, the following review was posted:

Reviewer: Holly-Wood
Certification: hold
Comments:
There's a gap between the 2-4 cylinder and the structure below (rounding error?)

2 4 16 1.5 -3 15.421 1.5 -3.001
2 4 15.339 1.5 2.999 16 1.5 3
At Sun Mar 7 00:40:02 2021, a new version of the file was submitted.
Submitted by: GeraldLasser
Comments:
corrected gaps

Existing certification-votes were deleted.
At Mon Mar 8 07:25:01 2021, the following review was posted:

Reviewer: Holly-Wood
Certification: hold
Comments:
Guess this code doesn't belong there:

2 4 16 1.5 -3 15.421 1.5 -3
2 4 15.339 1.5 3 16 1.5 3

* Correcting the gap you have also to correct the rounding error in 87610s02.dat:

2 3 15.421 1.5 -3 15.421 1.5 -3.001

At Sat Mar 20 15:50:01 2021, the following review was posted:

Reviewer: MagFors
Certification: hold
Comments:
2 unrelated edge lines. Maybe you could use 2 cyli primitives?
At Sat Mar 20 21:10:01 2021, a new version of the file was submitted.
Submitted by: GeraldLasser
Comments:
@Magnus, you mean splittig this 1 16 16 1.5 0 0 -2 -.236 0 0 -3 3 0 0 2-4cyli.dat
along here? 2 11 15.339 1.5 3 15.421 1.5 -3

removed the extra lines

Existing certification-votes were deleted.
At Sat Mar 20 21:25:01 2021, a new version of the file was submitted.
Submitted by: GeraldLasser
Comments:
split the cyli

At Sat Mar 20 21:30:01 2021, the following review was posted:

Reviewer: MagFors
Certification: certify
Comments:
I thought it was possible to split it like this:
1 5 16 1.5 0 0 -.579 -.236 0 0 -3 3 0 0 2-4cyli.dat
1 3 15.421 1.5 0 0 -1.421 -.236 0 0 -3 3 0 0 2-4cyli.dat
but I see now that it isn't. The cyli need to be thicker on the backside.

At Sat Mar 20 21:40:01 2021, the following review was posted:

Reviewer: MagFors
Certification: certify
Comments:
Ah, you moved the vertex too...

At Mon Mar 22 12:50:01 2021, the following review was posted:

Reviewer: Holly-Wood
Certification: hold
Comments:
Edger produces some conds on the inside while this:

13.12_4_ 20.2879 -2.5 is a rounding error compared to this: 13.125 3.5 -2

At Tue Apr 6 20:40:01 2021, a new version of the file was submitted.
Submitted by: GeraldLasser
Comments:
corrected the rounding error

but I cannot make the bottom flat to avoid condlines, so I added them

Existing certification-votes were deleted.
At Wed Apr 7 10:20:01 2021, the following review was posted:

Reviewer: Holly-Wood
Certification: hold
Comments:
* Still one rounding error: 13.124 19.82 2.5

* Edger wants to add two more conds

At Wed Apr 7 14:35:02 2021, a new version of the file was submitted.
Submitted by: GeraldLasser
Comments:
corrected the rounding

Which other condline? My edger only found one on the inside

Existing certification-votes were deleted.
At Wed Apr 7 19:20:01 2021, the following review was posted:

Reviewer: Holly-Wood
Certification: certify
Comments:
Fixing the rounding error the second cond was no longer needed.

At Thu Apr 22 16:30:02 2021, the following review was posted:

Reviewer: MagFors
Certification: certify
No comments were posted with this review.

At Mon Jun 14 00:15:01 2021 a Parts Tracker Admin edited the header.
At Mon Jun 14 00:15:01 2021, the following review was posted:

Reviewer: cwdee
Certification: certify
No comments were posted with this review.