Unofficial File parts/s/4716s02.dat
part image
File Header:
0 ~Technic Worm Gear Body
0 Name: s\4716s02.dat
0 Author: Santeri Piippo [arezey]
0 !LDRAW_ORG Unofficial_Subpart
0 !LICENSE Redistributable under CCAL version 2.0 : see CAreadme.txt

0 BFC CERTIFY CCW

0 !HISTORY 2019-03-02 [MagFors] Removed inner surfaces, subfiled end surface

Status:
3 subfiles aren't certified. (CCSSSN)
Size: 4157 bytes
Reviewers' certifications:
Philo=certify
UR=certify
Required (unofficial) subfiles:
~Technic Worm Gear Thread Surface
Status: Needs admin review. (CCF)
~Technic Worm Gear End Surface
Status: Needs admin review. (CCN)
~Cylinder Helical Cylinder 0.25 with Edges
Status: Needs admin review. (CCN)
Related (unofficial) subfiles:
Technic Worm Gear with Reduced Axlehole
Status: 4 subfiles aren't certified. (CCSSSSN)
Download: parts/32905.dat
Technic Worm Gear
Status: 1 subfile isn't certified. (CCSF)
Download: parts/4716.dat
File reviews and updates:
At Sun Feb 24 15:05:01 2019, the file was initially submitted.
Submitted by: arezey
At Thu Feb 28 23:00:02 2019, the following review was posted:

Reviewer: MagFors
Certification: certify
Comments:
I really dislike that unnecessary surface hidden inside this file.
Maybe we should change s01 too?

At Fri Mar 1 11:15:01 2019, the following review was posted:

Reviewer: arezey
Certification: novote
Comments:
The hidden surfaces produce artifacts into the axlehole... so I'd also prefer if this was corrected.

At Fri Mar 1 13:35:02 2019, the following review was posted:

Reviewer: Philo
Certification: novote
Comments:
The way it is done also creates unnecessary splits in worm surface...

Why broken dependancy between 4716s02.dat and 32905.dat?

At Fri Mar 1 17:40:01 2019, the following review was posted:

Reviewer: MagFors
Certification: novote
Comments:

OK, I'll change s01.

But how?
Here, 4716s01 is used four times. My idea was to move the endsurface to a third subfile, and add it twice in this file.
4716s01 is also used in 46226, but only three times.

At Fri Mar 1 19:20:02 2019, the following review was posted:

Reviewer: Philo
Certification: novote
Comments:
I suggest to make a quarter turn of screw as s01. Then duplicate by rotation+translation. Ends may be done as a second subpart as you suggested.

At Sun Mar 3 17:40:01 2019, a new version of the file was submitted.
Submitted by: MagFors
Comments:
Reworked to use the subfiles without inner, hidden surfaces.

Existing certification-votes were deleted.
At Sat Mar 9 07:55:02 2019, the following review was posted:

Reviewer: Philo
Certification: certify
No comments were posted with this review.

At Sat Mar 9 12:30:02 2019, a new version of the file was submitted.
Submitted by: MagFors
Comments:
This is as simple I can get it.

Existing certification-votes were deleted.
At Sat Mar 9 17:25:01 2019, a new version of the file was submitted.
Submitted by: arezey
Comments:
Added a history entry for the subparting

At Wed Dec 4 08:55:02 2019, the following review was posted:

Reviewer: Philo
Certification: hold
Comments:
Most cyloh overlap s01. You forgot to update s01?

At Wed Dec 4 17:45:01 2019, the following review was posted:

Reviewer: MagFors
Certification: novote
Comments:
Yes, it looks like the s01 is not updated correctly.

Looking at that strange primitive again, I am now thinking it should maybe be a subfile instead.
A single subfile rescaled like a primitive? I can't wrap my head around this thing.... Help.
At Wed Dec 4 18:45:02 2019, the following review was posted:

Reviewer: Philo
Certification: hold
Comments:
Since it is not really scalable, I'd make cyloh a simple subfile (scaled to fit wormscrew)

At Thu Dec 5 22:35:02 2019, a new version of the file was submitted.
Submitted by: MagFors
Existing certification-votes were deleted.
At Fri Dec 6 08:50:01 2019, the following review was posted:

Reviewer: Philo
Certification: certify
No comments were posted with this review.

At Thu Jan 2 15:35:02 2020, the following review was posted:

Reviewer: UR
Certification: certify
No comments were posted with this review.