Unofficial File parts/s/30271s02.dat
File Header:
0 ~Baseplate 32 x 48 Raised with Corner Pits - Quarter Undertray
0 Name: s\30271s02.dat
0 Author: William Howard [WilliamH]
0 !LDRAW_ORG Unofficial_Subpart
0 !LICENSE Redistributable under CCAL version 2.0 : see CAreadme.txt
0 BFC CERTIFY CCW
0 !CATEGORY Arm
0 !HISTORY 2005-12-28 [PTadmin] Official Update 2005-01
0 !HISTORY 2007-08-29 [PTadmin] Header formatted for Contributor Agreement
0 !HISTORY 2008-07-01 [PTadmin] Official Update 2008-01
0 !HISTORY 2020-06-21 [Mad_Marc] Corner BFC corrected, primitives used
Status:
Needs admin review. (CCF)
Size: 5475 bytes
Reviewers' certifications:
Cheenzo=certify MagFors=certify OrionP=novote
Required (unofficial) subfiles:
(none)
Related (unofficial) subfiles:
2 subfiles aren't certified. (CCSSF)File reviews and updates:
At Thu Jan 23 21:30:01 2020, the following review was posted:
Reviewer: MagFors
Certification: certify
Comments:
The main part needs correction too.
It has all the studs in the top surface subfile, and that subfile is used mirrored, resulting in mirrored stud logos.
Reviewer: MagFors
Certification: certify
Comments:
The main part needs correction too.
It has all the studs in the top surface subfile, and that subfile is used mirrored, resulting in mirrored stud logos.
At Sun Feb 2 20:30:01 2020, the following review was posted:
Reviewer: Holly-Wood
Certification: certify
No comments were posted with this review.
Reviewer: Holly-Wood
Certification: certify
No comments were posted with this review.
At Sat Mar 21 11:55:01 2020, the following review was posted:
Reviewer: cwdee
Certification: certify
No comments were posted with this review.
Reviewer: cwdee
Certification: certify
No comments were posted with this review.
At Fri Jun 19 18:40:01 2020, a new version of the file was submitted.
Submitted by: Mad_Marc
Comments:
2 minor errors corrected. Upper part added to my to do list.
Existing certification-votes were deleted.
Submitted by: Mad_Marc
Comments:
2 minor errors corrected. Upper part added to my to do list.
Existing certification-votes were deleted.
At Fri Jun 19 23:15:01 2020, the following review was posted:
Reviewer: Mad_Marc
Certification: novote
Comments:
2 vertices to move on the upper subpart for optimisation (primitive use).
Reviewer: Mad_Marc
Certification: novote
Comments:
2 vertices to move on the upper subpart for optimisation (primitive use).
At Mon Jun 22 18:05:01 2020, a new version of the file was submitted.
Submitted by: Mad_Marc
Comments:
Part 30271 and subpart 30271s01 submitted to admin. Subparts haven't the same "cutting" than previous version.
Existing certification-votes were deleted.
Submitted by: Mad_Marc
Comments:
Part 30271 and subpart 30271s01 submitted to admin. Subparts haven't the same "cutting" than previous version.
Existing certification-votes were deleted.
At Tue Jul 14 15:50:02 2020, the following review was posted:
Reviewer: MagFors
Certification: certify
No comments were posted with this review.
Reviewer: MagFors
Certification: certify
No comments were posted with this review.
At Thu Jul 16 20:45:01 2020, a new version of the file was submitted.
Submitted by: Mad_Marc
Comments:
Box3-3.dat added. Same improvement than 30271s01.dat.
Existing certification-votes were deleted.
Submitted by: Mad_Marc
Comments:
Box3-3.dat added. Same improvement than 30271s01.dat.
Existing certification-votes were deleted.
At Fri Jul 17 10:25:01 2020, the following review was posted:
Reviewer: MagFors
Certification: certify
No comments were posted with this review.
Reviewer: MagFors
Certification: certify
No comments were posted with this review.
At Fri Jul 17 13:10:02 2020, the following review was posted:
Reviewer: OrionP
Certification: novote
Comments:
The 3D viewer is showing a gap. It's easiest to see in BFC mode. Is this a real gap or and rendering error?
Reviewer: OrionP
Certification: novote
Comments:
The 3D viewer is showing a gap. It's easiest to see in BFC mode. Is this a real gap or and rendering error?
At Fri Jul 17 16:05:01 2020, the following review was posted:
Reviewer: MagFors
Certification: certify
Comments:
That's really weird. It's more than the gap. All the quads look different, if I compare the viewer and the downloaded file.
In the viewer I see lots of T-junctions and a triangles that simply isn't there.
Reviewer: MagFors
Certification: certify
Comments:
That's really weird. It's more than the gap. All the quads look different, if I compare the viewer and the downloaded file.
In the viewer I see lots of T-junctions and a triangles that simply isn't there.
At Fri Jul 17 16:45:01 2020, the following review was posted:
Reviewer: OrionP
Certification: novote
Comments:
Based on your input it's definitely a problem with the 3d view. It appears to be pulling the official version of the part so there's a problem with pathing.
Reviewer: OrionP
Certification: novote
Comments:
Based on your input it's definitely a problem with the 3d view. It appears to be pulling the official version of the part so there's a problem with pathing.
At Fri Jul 17 16:50:02 2020, the following review was posted:
Reviewer: OrionP
Certification: novote
Comments:
Issue fixed.
Reviewer: OrionP
Certification: novote
Comments:
Issue fixed.
At Fri Jul 17 17:05:01 2020, the following review was posted:
Reviewer: MagFors
Certification: certify
Comments:
Yes, now it looks ok.
I can confirm that it was the old, official file we saw earlier.
Reviewer: MagFors
Certification: certify
Comments:
Yes, now it looks ok.
I can confirm that it was the old, official file we saw earlier.
At Tue Sep 22 06:55:01 2020, the following review was posted:
Reviewer: Cheenzo
Certification: certify
No comments were posted with this review.
Reviewer: Cheenzo
Certification: certify
No comments were posted with this review.
3D View