Unofficial File parts/s/27956s01.dat
part image
File Header:
0 ~Minifig Head Alien E. T. without Patternable Areas - Half
0 Name: s\27956s01.dat
0 Author: Gerald Lasser [GeraldLasser]
0 !LDRAW_ORG Unofficial_Subpart
0 !LICENSE Redistributable under CCAL version 2.0 : see CAreadme.txt

0 BFC CERTIFY CCW


Status:
Needs more votes. (CN)
Size: 82561 bytes
Reviewers' certifications:
Holly-Wood=certify
Required (unofficial) subfiles:
(none)
Related (unofficial) subfiles:
Minifig Head Alien E. T.
Status: 1 subfile isn't certified. (CSN)
Download: parts/27956.dat
Minifig Head Alien E. T. with Blue Eyes and Grin Pattern
Status: 2 subfiles aren't certified. (CSSN)
File reviews and updates:
At Mon Mar 5 17:10:00 2018, the file was initially submitted.
Submitted by: GeraldLasser
At Mon Mar 5 18:45:00 2018, the following review was posted:

Reviewer: arezey
Certification: novote
Comments:
Is there a missing edge inside the nostril?

At Mon Apr 23 19:55:01 2018, the following review was posted:

Reviewer: MagFors
Certification: hold
Comments:
I think many triangle pairs should be flipped to make the neck more convex.
Many of the cond-lines in the neck have bad control points.
One cond-line is missing

At Tue Apr 24 10:05:00 2018, the following review was posted:

Reviewer: GeraldLasser
Certification: novote
Comments:
OK, started to swap them, Is there a function in LDPE to do so?

At Tue Apr 24 11:25:00 2018, the following review was posted:

Reviewer: Philo
Certification: novote
Comments:
Yes, select a pair of adjacent triangles and hit "f" for flip (or Actions -> flip).

At Sun Dec 16 07:50:01 2018, the following review was posted:

Reviewer: MagFors
Certification: hold
Comments:

Gerald,
You need to upload the updated subfile again. This time to the correct folder.

At Mon Dec 17 22:15:01 2018, a new version of the file was submitted.
Submitted by: GeraldLasser
Comments:
..this time to the correct folder

Existing certification-votes were deleted.
At Fri Dec 21 20:50:01 2018, the following review was posted:

Reviewer: MagFors
Certification: hold
Comments:
I can't find any difference. Is it the same unchanged file uploaded again?

At Fri Dec 21 23:25:01 2018, the following review was posted:

Reviewer: GeraldLasser
Certification: novote
Comments:
It is a different file. I still got the original in my folder, dated Mar 5. The neck triangles are swapped and also a number on the to of the head. Shall I upload both in the forum? You want to compare them?

At Sat Dec 22 13:50:02 2018, the following review was posted:

Reviewer: MagFors
Certification: certify
Comments:
Sorry, I had the updated file in my unofficial folder.
(and a bad copy in an older folder)
At Mon Dec 24 22:45:01 2018, a new version of the file was submitted.
Submitted by: GeraldLasser
Comments:
removed to extensions of the wrinkles into the eyeball

Existing certification-votes were deleted.
At Mon Dec 31 15:30:02 2018, the following review was posted:

Reviewer: MagFors
Certification: certify
Comments:

Might still have to many wrinkles above he nose.
I know, he is supposed to be wrinkly...

At Mon Jan 7 23:10:02 2019, a new version of the file was submitted.
Submitted by: GeraldLasser
Comments:
adapted naming

Existing certification-votes were deleted.
At Mon Jan 21 17:05:01 2019, the following review was posted:

Reviewer: MagFors
Certification: certify
No comments were posted with this review.

At Wed Dec 18 18:00:02 2019, the following review was posted:

Reviewer: Philo
Certification: novote
Comments:
- imho these line and condline type should be swapped
2 24 8.396 -29.975 -6.729 8.585 -10.358 -6.089
5 24 8.396 -29.975 -6.729 7.806 -9.177 -5.899 8.585 -10.358 -6.089 4.815 -8.378 -8.277
- contains a meaningless 0 // Stud4 comment
- These lines should be the same type (I think condlines)
5 24 1.599 -19.067 -28.02 1.599 -20.053 -28.744 2.681 -18.823 -27.853 .884 -19.552 -29.796
2 24 1.599 -20.053 -28.744 1.652 -20.744 -29.838
At Tue May 5 19:10:01 2020 a Parts Tracker Admin edited the header.
At Fri Sep 25 12:40:02 2020, the following review was posted:

Reviewer: UR
Certification: novote
Comments:
would also like to certify ...
but Phillipe is correct IMO ...on closer inspection.

At Sat Dec 26 17:00:02 2020 a Parts Tracker Admin edited the header.
At Fri Feb 26 16:55:01 2021, the following review was posted:

Reviewer: Holly-Wood
Certification: hold
Comments:
I agree with Philo. Holding to get the job done.

These could be rectified:

3 5 3.622 -22.122 -27.109 1.865 -23.322 -27.841 3.208 -20.501 -28.995
3 5 3.208 -20.501 -28.995 1.865 -23.322 -27.841 1.602 -21.508 -29.749
At Fri Feb 26 18:05:01 2021, a new version of the file was submitted.
Submitted by: MagFors
Comments:
Corrected mentioned issues.
Used Rectifier.
Corrected bad controlpoints on flipped surfaces.

Existing certification-votes were deleted.
At Sat Feb 27 12:30:01 2021, the following review was posted:

Reviewer: Holly-Wood
Certification: hold
Comments:
* Please check this edge:

2 1 .621 -32.941 -26.998 0 -33.871 -25.83

* I don't know if it was a good idea to convert both in conds rather than edges. Looks still pretty edgy:

5 2 1.599 -19.067 -28.02 1.599 -20.053 -28.744 2.681 -18.823 -27.853 .884 -19.552 -29.796
5 2 1.599 -20.053 -28.744 1.652 -20.744 -29.838 .884 -19.552 -29.796 2.707 -20.039 -29.301

At Sat Feb 27 13:10:01 2021, the following review was posted:

Reviewer: MagFors
Certification: novote
Comments:
I'll fix the condlines, in the mainfile, but I don't understand the issues here in the subfile.

What's wrong with the edge line?
Any idea on how to fix the nostrils?

At Sat Feb 27 13:20:01 2021, the following review was posted:

Reviewer: Holly-Wood
Certification: hold
Comments:
Rounding error:

2 1 .24 -32.592 -26.626 0 -33.871 -25.834
2 1 .621 -32.941 -26.998 0 -33.871 -25.83

As for the nostrils I would simply convert the conds to edges. Looks good.

At Sat Feb 27 14:05:01 2021, a new version of the file was submitted.
Submitted by: MagFors
Comments:
Fixed.

Existing certification-votes were deleted.
At Sat Feb 27 15:40:01 2021, the following review was posted:

Reviewer: Holly-Wood
Certification: certify
No comments were posted with this review.

At Tue Mar 2 16:15:01 2021, a new version of the file was submitted.
Submitted by: MagFors
Comments:
Adjusted the vertices around the ring primitives, in the main files.

Existing certification-votes were deleted.
At Wed Mar 3 14:35:01 2021, the following review was posted:

Reviewer: Holly-Wood
Certification: certify
No comments were posted with this review.