Unofficial File parts/s/18585s01.dat
part image
File Header:
0 ~Technic Brick  2 x  4 with Holes and Launcher - Hole
0 Name: s\18585s01.dat
0 Author: Massimo Maso [Sirio]
0 !LDRAW_ORG Unofficial_Subpart
0 !LICENSE Redistributable under CCAL version 2.0 : see CAreadme.txt

0 BFC CERTIFY CCW

0 // Primitives
Status:
Needs admin review. (CCN)
Size: 8755 bytes
Reviewers' certifications:
GeraldLasser=certify
MagFors=certify
Required (unofficial) subfiles:
(none)
Related (unofficial) subfiles:
Technic Brick 2 x 4 with Holes and Launcher
Status: 1 subfile isn't certified. (CCSN)
Download: parts/18585.dat
File reviews and updates:
At Tue Apr 21 08:15:01 2020, the file was initially submitted.
Submitted by: Sirio
Comments:
This subpart is derived from the 48170. Since the hole is complex enough, I created a subpart with a single hole so that it can be reused quickly.

At Fri Apr 24 17:55:01 2020, the following review was posted:

Reviewer: MagFors
Certification: novote
Comments:
These T-junctions are easy to eliminate:
2 4 8 20 2 5.603 20 2
2 4 -5.603 20 2 -8 20 2
2 4 8 20 -2 5.603 20 -2
2 4 -5.603 20 -2 -8 20 -2

All the overlapping 1-8cyls could be replaced by 3-16cyls

At Sun Apr 26 07:00:01 2020, a new version of the file was submitted.
Submitted by: Sirio
Existing certification-votes were deleted.
At Sat May 2 17:45:01 2020, the following review was posted:

Reviewer: MagFors
Certification: certify
Comments:
Surface bleeding and overlapping surfaces.

At Sat Sep 26 22:25:01 2020, the following review was posted:

Reviewer: GeraldLasser
Certification: novote
Comments:
The combinations:
1 16 0 10 -20 -1 0 0 0 0 1 0 1 0 peghole.dat
1 16 0 10 20 1 0 0 0 0 1 0 -1 0 peghole.dat
0 BFC INVERTNEXT
1 16 0 10 -2 6 0 0 0 0 6 0 -16 0 4-4cyli.dat
0 BFC INVERTNEXT
1 16 0 10 2 -6 0 0 0 0 6 0 16 0 4-4cyli.dat

should be replaced with a connhol3, the main file has enough space to accommodate the larger NDIS required

At Tue Sep 29 19:45:01 2020, a new version of the file was submitted.
Submitted by: Sirio
Comments:
Fixed

Existing certification-votes were deleted.
At Wed Sep 30 18:15:01 2020, the following review was posted:

Reviewer: MagFors
Certification: novote
Comments:
Maybe something could be done to the surface bleeding.

At Thu Oct 1 20:15:01 2020, a new version of the file was submitted.
Submitted by: Sirio
Existing certification-votes were deleted.
At Thu Oct 1 20:25:01 2020, the following review was posted:

Reviewer: Sirio
Certification: novote
Comments:
I reworked the piece.
The bleeding problem remains because I use the 3-16ring12 which does not have the 48-sided counterpart. Or a 3-16tang would be needed, but this too is missing.

At Thu Oct 1 21:35:01 2020, the following review was posted:

Reviewer: MagFors
Certification: hold
Comments:
If this condlines should work
5 24 5.6568 24 -5.6568 5.6568 16.837 -5.6568 3.0616 24 -7.3912 6.765 24 -4
these quads must have the same length
4 16 5.6568 16.2837 -5.6568 5.6568 24 -5.6568 3.0616 24 -7.3912 3.0616 16.2837 -7.3912
4 16 6.765 24 -4 6.3639 16.3639 -4.5988 5.6568 16.837 -5.6568 5.6568 24 -5.6568

A surface placed next to a cyli prim must have the same length as the cyli.
The added condline should also have the same length as the cyli.

At Sat Oct 3 13:30:02 2020, a new version of the file was submitted.
Submitted by: Sirio
Existing certification-votes were deleted.
At Sun Oct 25 20:05:01 2020, the following review was posted:

Reviewer: MagFors
Certification: certify
No comments were posted with this review.

At Sun Oct 25 21:55:02 2020, the following review was posted:

Reviewer: GeraldLasser
Certification: certify
No comments were posted with this review.