Unofficial File parts/s/15428s01.dat
part image
File Header:
0 ~Minifig Hood Folded Down - Outside
0 Name: s\15428s01.dat
0 Author: Magnus Forsberg [MagFors]
0 !LDRAW_ORG Unofficial_Subpart
0 !LICENSE Redistributable under CCAL version 2.0 : see CAreadme.txt

0 BFC CERTIFY CCW

0 !HISTORY 2014-05-16 {LEGO Digital Designer} Original part shape
0 !HISTORY 2015-11-28 [MagFors] File preparation for LDraw Parts Tracker

Status:
Needs more votes. (CX)
Size: 354887 bytes
Reviewers' certifications:
MMR1988=novote
MagFors=novote
Philo=novote
fwcain=certify
Required (unofficial) subfiles:
(none)
Related (unofficial) subfiles:
Minifig Hood Folded Down
Status: 2 subfiles aren't certified. (CCSSX)
Download: parts/15428.dat
Minifig Hood Folded Down with Purple Inside Pattern
Status: 2 subfiles aren't certified. (CSSX)
File reviews and updates:
At Sat Nov 28 17:05:00 2015, the file was initially submitted.
Submitted by: MagFors
At Sat Nov 28 18:35:00 2015, the following review was posted:

Reviewer: MMR1988
Certification: hold
Comments:
Edger2 created those two condlines:
5 9 -10.7 11.838 11.828 -11.192 10.041 11.466 -11.687 9.897 12.199 -9.86 11.807 11.029
5 9 -9.055 13.377 11.145 -9.982 13.679 12.145 -8.789 15.846 12.573 -9.86 11.807 11.029

a visual check of the part brings the same result. At least the control points of these two condlines are not well placed...

At Sun Nov 29 19:00:00 2015, a new version of the file was submitted.
Submitted by: MagFors
Comments:
Flatened the inside surface.
Recreated cond-lines

Existing certification-votes were deleted.
At Sun Nov 29 19:30:00 2015, the following review was posted:

Reviewer: MMR1988
Certification: novote
Comments:
I'm not sure why your edger2 doesn't doesn't bring these two condlines:
5 9 -9.055 13.377 11.145 -9.982 13.679 12.145 -8.789 15.846 12.573 -9.86 11.807 11.029
5 9 2.271 0 10 0 1.1262 10.1701 12.693 1.174 10.171 0 0 10
but at least the one on the side has wrong control points which causes in a short disappearing of the black border line, when checking visually.

At Sun Nov 29 23:30:00 2015, the following review was posted:

Reviewer: MagFors
Certification: novote
Comments:
I guess we have different settings for flat angle.
I have mine at 0.1. What do you use?

At Sun Apr 8 19:40:01 2018, the following review was posted:

Reviewer: MMR1988
Certification: novote
Comments:
My value is much lower. Anyway here's a picture which indicates the missing condline:
http://i22.photobucket.com/albums/b334/MMR88/LDraw/15428s01_zpsoqxie0vl.png~original
At Mon Apr 9 09:55:00 2018, the following review was posted:

Reviewer: Philo
Certification: novote
Comments:
Default min angle for Edger2 is 0.1 degrees

At Mon Apr 9 14:05:00 2018, the following review was posted:

Reviewer: MMR1988
Certification: novote
Comments:
Ok, I checked my paramaters and use only default values: (%0 and %3 are parameters for external LDDP programs)
-c -b -s -l d:\ldraw %0 %3_edger.dat
At Wed May 1 12:45:01 2019, the following review was posted:

Reviewer: fwcain
Certification: certify
No comments were posted with this review.