Unofficial File parts/s/11094s02.dat
File Header:
0 ~Wheel 30 x 64 with 7 Pin Holes and 6 Small Holes - 1/12 Outside Surface
0 Name: s\11094s02.dat
0 Author: Massimo Maso [Sirio]
0 !LDRAW_ORG Unofficial_Subpart
0 !LICENSE Redistributable under CCAL version 2.0 : see CAreadme.txt
0 BFC CERTIFY CCW
0 // Faces
Status:
Needs admin review. (CCN)
Size: 26675 bytes
Reviewers' certifications:
MMR1988=certify MagFors=certify
Required (unofficial) subfiles:
(none)
Related (unofficial) subfiles:
1 subfile isn't certified. (CCSN)File reviews and updates:
At Mon Mar 16 07:55:01 2020, a new version of the file was submitted.
Submitted by: Sirio
Comments:
Added dimensions.
Submitted by: Sirio
Comments:
Added dimensions.
At Thu Sep 3 20:35:01 2020, the following review was posted:
Reviewer: MagFors
Certification: hold
Comments:
Leading or trailing zeros found. HOLD
Maybe you could use DatHeader to eliminate this type of errors.
Reviewer: MagFors
Certification: hold
Comments:
Leading or trailing zeros found. HOLD
Maybe you could use DatHeader to eliminate this type of errors.
At Fri Sep 4 16:45:01 2020, a new version of the file was submitted.
Submitted by: Sirio
Existing certification-votes were deleted.
Submitted by: Sirio
Existing certification-votes were deleted.
At Sun Sep 20 22:30:02 2020, the following review was posted:
Reviewer: MagFors
Certification: hold
Comments:
These condlines doesn't work:
5 24 75.2137 20.1525 -7.625 75.1429 20.1345 -5.4372 75.8269 16.8437 -2 74.6336 22.2127 -7.625
5 24 75.1793 20.1442 -13.265 75.2137 20.1525 -12.375 75.4361 19.3125 -12.375 71.9432 29.8005 -12.375
5 24 75.2137 20.1525 -7.625 75.2137 20.1525 -12.375 75.4361 19.3125 -12.375 71.9432 29.8005 -12.375
And there's something not right here:
4 16 77.1993 10.1619 -12.375 75.4361 19.3125 -12.375 75.2137 20.1525 -7.625 77.1993 10.1619 -7.625
3 16 74.6336 22.2127 -7.625 75.2137 20.1525 -12.375 71.9432 29.8005 -12.375
3 16 75.2137 20.1525 -7.625 75.2777 19.5387 -4.8125 77.1993 10.1619 -7.625
3 16 75.2137 20.1525 -12.375 74.5929 21.9306 -15.1879 71.9432 29.8005 -12.375
Isn't there to much edge lines on the tread surface? In LDD it has a very distinct zigzag pattern.
Reviewer: MagFors
Certification: hold
Comments:
These condlines doesn't work:
5 24 75.2137 20.1525 -7.625 75.1429 20.1345 -5.4372 75.8269 16.8437 -2 74.6336 22.2127 -7.625
5 24 75.1793 20.1442 -13.265 75.2137 20.1525 -12.375 75.4361 19.3125 -12.375 71.9432 29.8005 -12.375
5 24 75.2137 20.1525 -7.625 75.2137 20.1525 -12.375 75.4361 19.3125 -12.375 71.9432 29.8005 -12.375
And there's something not right here:
4 16 77.1993 10.1619 -12.375 75.4361 19.3125 -12.375 75.2137 20.1525 -7.625 77.1993 10.1619 -7.625
3 16 74.6336 22.2127 -7.625 75.2137 20.1525 -12.375 71.9432 29.8005 -12.375
3 16 75.2137 20.1525 -7.625 75.2777 19.5387 -4.8125 77.1993 10.1619 -7.625
3 16 75.2137 20.1525 -12.375 74.5929 21.9306 -15.1879 71.9432 29.8005 -12.375
Isn't there to much edge lines on the tread surface? In LDD it has a very distinct zigzag pattern.
At Tue Sep 22 19:50:02 2020, a new version of the file was submitted.
Submitted by: Sirio
Comments:
I should have fixed the conditional lines with wrong control points.
I have turned some edge lines into conditional lines on the outer cylinder.
Existing certification-votes were deleted.
Submitted by: Sirio
Comments:
I should have fixed the conditional lines with wrong control points.
I have turned some edge lines into conditional lines on the outer cylinder.
Existing certification-votes were deleted.
At Wed Sep 23 20:00:01 2020, the following review was posted:
Reviewer: MagFors
Certification: hold
Comments:
It's still missing vital condlines on t5he tread surface.
I don't understand many of the vertices. I think many of the surfaces are flat enough to be eliminated.
like this:
4 16 69.1417 18.6737 9.969 69.1786 18.5364 9.969 71.9078 19.2676 9.969 71.6253 20.2925 9.969
3 16 69.1417 18.6737 9.969 68.3458 18.1549 -24.5 69.1786 18.5364 9.969
4 16 71.6253 20.2925 9.969 71.9078 19.2676 9.969 71.9078 19.2676 -5.2892 71.6253 20.2925 -6.3751
why is this divided in two:
4 16 70.1064 23.3352 -18 70.6689 21.5718 -16.1071 70.7658 21.2517 -31.536 70.1064 23.3352 -31.536
4 16 70.7658 21.2517 -31.536 70.6689 21.5718 -16.1071 71.1871 19.7949 -14.2154 71.3634 19.1496 -31.536
Reviewer: MagFors
Certification: hold
Comments:
It's still missing vital condlines on t5he tread surface.
I don't understand many of the vertices. I think many of the surfaces are flat enough to be eliminated.
like this:
4 16 69.1417 18.6737 9.969 69.1786 18.5364 9.969 71.9078 19.2676 9.969 71.6253 20.2925 9.969
3 16 69.1417 18.6737 9.969 68.3458 18.1549 -24.5 69.1786 18.5364 9.969
4 16 71.6253 20.2925 9.969 71.9078 19.2676 9.969 71.9078 19.2676 -5.2892 71.6253 20.2925 -6.3751
why is this divided in two:
4 16 70.1064 23.3352 -18 70.6689 21.5718 -16.1071 70.7658 21.2517 -31.536 70.1064 23.3352 -31.536
4 16 70.7658 21.2517 -31.536 70.6689 21.5718 -16.1071 71.1871 19.7949 -14.2154 71.3634 19.1496 -31.536
At Tue Oct 27 22:50:02 2020, a new version of the file was submitted.
Submitted by: Sirio
Existing certification-votes were deleted.
Submitted by: Sirio
Existing certification-votes were deleted.
At Wed Oct 28 17:05:01 2020, the following review was posted:
Reviewer: MMR1988
Certification: hold
Comments:
Please fix the last controlpoint of this condline from:
5 24 68.8204 18.4395 -39.5 60.9982 16.3444 -46 62.1093 11.4173 -46 68.5694 19.3598 -39.5
to:
5 24 68.8204 18.4395 -39.5 60.9982 16.3444 -46 62.1093 11.4173 -46 59.6609 20.7002 -46
Reviewer: MMR1988
Certification: hold
Comments:
Please fix the last controlpoint of this condline from:
5 24 68.8204 18.4395 -39.5 60.9982 16.3444 -46 62.1093 11.4173 -46 68.5694 19.3598 -39.5
to:
5 24 68.8204 18.4395 -39.5 60.9982 16.3444 -46 62.1093 11.4173 -46 59.6609 20.7002 -46
At Thu Oct 29 20:40:01 2020, a new version of the file was submitted.
Submitted by: Sirio
Comments:
Fixed conditional lines
Existing certification-votes were deleted.
Submitted by: Sirio
Comments:
Fixed conditional lines
Existing certification-votes were deleted.
At Thu Oct 29 21:35:01 2020, the following review was posted:
Reviewer: MMR1988
Certification: certify
No comments were posted with this review.
Reviewer: MMR1988
Certification: certify
No comments were posted with this review.
At Sat Nov 28 10:15:01 2020, the following review was posted:
Reviewer: MagFors
Certification: certify
No comments were posted with this review.
Reviewer: MagFors
Certification: certify
No comments were posted with this review.
3D View