Unofficial File parts/s/11055s01.dat
part image
File Header:
0 ~Flag  2 x  2 Square (Thick C-Clip) without Main Faces
0 Name: s\11055s01.dat
0 Author: Bertrand Lequy [Berth]
0 !LDRAW_ORG Unofficial_Subpart
0 !LICENSE Redistributable under CCAL version 2.0 : see CAreadme.txt


0 BFC CERTIFY CCW

Status:
1 subfile isn't certified. (CCSN)
Size: 3445 bytes
Reviewers' certifications:
MMR1988=certify
MagFors=certify
Required (unofficial) subfiles:
Vertical Thick Clip for Flags
Status: Needs admin review. (CCN)
Download: p/clip16.dat
Related (unofficial) subfiles:
Flag 2 x 2 Square (Thick C-Clip)
Status: 1 subfile isn't certified. (CCSN)
Download: parts/11055.dat
File reviews and updates:
At Fri Apr 16 12:55:01 2021, the file was initially submitted.
Submitted by: Berth
At Sat May 1 14:15:01 2021, the following review was posted:

Reviewer: MagFors
Certification: hold
Comments:
I tried to make a pattern on this flag, and think it might be a bit off.
It might be true to the ldd data, but IMHO the printable, flat surface should be 39x40 ldu. The clips are too long.
In ldd there's actually 3 different designs on this flag, 2335, 60774 and 11055

I had a dig into my parts:
2335: has a flat 40x40 surface, edgeline between the clip and surface
60774: has a flat 40x40 surface, edgeline between the clip and surface, and an extension between the clips, 2.5 ldu. Total length 42.5 ldu.
11055: has a flat 39x40 surface, no edgeline between the clip and surface, and an extension between the clips, 3.5 ldu. Total length 42.5 ldu.

All 3 parts have a inner curve, between the clips, but it's not modelled on 2335.
Non of the clips on 2335 or 60774 have that sharp corners on the thin clip, that is present in clip1.

At Sun May 2 11:40:01 2021, the following review was posted:

Reviewer: Berth
Certification: novote
Comments:
I tried to make a pattern on this flag, and think it might be a bit off. -----> yes i feared that, but I don't have patterned 11055 at home, only a bunch of plain ones.
It might be true to the ldd data, but IMHO the printable, flat surface should be 39x40 ldu. The clips are too long. ---> I'm going to take a look on that
In ldd there's actually 3 different designs on this flag, 2335, 60774 and 11055 ----> I don't have 2335 and 60774 at home.

I had a dig into my parts:
2335: has a flat 40x40 surface, edgeline between the clip and surface
60774: has a flat 40x40 surface, edgeline between the clip and surface, and an extension between the clips, 2.5 ldu. Total length 42.5 ldu.
11055: has a flat 39x40 surface, no edgeline between the clip and surface, and an extension between the clips, 3.5 ldu. Total length 42.5 ldu.

All 3 parts have a inner curve, between the clips, but it's not modelled on 2335.
Non of the clips on 2335 or 60774 have that sharp corners on the thin clip, that is present in clip1.

-----> I'm not sure to understand what you're talking about (due to my insufficent english level)

At Sun May 2 17:00:01 2021, the following review was posted:

Reviewer: MagFors
Certification: hold
Comments:
Maybe you could use the clip13 primitive instead of making yet another primitive, or subfile, that cant be reused in other flags with a similar C-Clip.
Like I just did in 53912s01. https://www.ldraw.org/cgi-bin/ptdetail.cgi?f=parts/s/53912s01.dat
At Sun May 2 20:40:01 2021, the following review was posted:

Reviewer: Berth
Certification: novote
Comments:
I tried the other clips before doing this one. Moreover it's the same clip that I used in https://www.ldraw.org/cgi-bin/ptdetail.cgi?f=parts/44676b.dat
I check with physical parts.
Anyway your solution would work too. I will take a look later

At Wed May 5 13:55:01 2021, a new version of the file was submitted.
Submitted by: Berth
Existing certification-votes were deleted.
At Tue Aug 31 22:05:01 2021, the following review was posted:

Reviewer: MagFors
Certification: hold
Comments:
This design is broken since clip16 is changed.

At Wed Sep 1 14:35:01 2021, a new version of the file was submitted.
Submitted by: Berth
Comments:
I thought I uploaded this one

Existing certification-votes were deleted.
At Wed Sep 1 15:40:01 2021, the following review was posted:

Reviewer: MagFors
Certification: certify
Comments:
Description of the clips?

At Tue May 10 15:45:01 2022 a Parts Tracker Admin edited the header.
At Thu Jun 9 19:55:02 2022, the following review was posted:

Reviewer: MMR1988
Certification: certify
No comments were posted with this review.