Unofficial File parts/98393f.dat
File Header:
0 Figure Friends Medical Feeding Bottle
0 Name: 98393f.dat
0 Author: Takeshi Takahashi [RainbowDolphin]
0 !LDRAW_ORG Unofficial_Part
0 !LICENSE Redistributable under CCAL version 2.0 : see CAreadme.txt
0 BFC CERTIFY CCW
0 !CATEGORY Figure Accessory
0 !KEYWORDS Multipack 98393, Hospital, Clinic, Vet, Rescue
0 !HISTORY 2021-03-20 {LEGO/Unity Microgame} Original part shape
0 !HISTORY 2021-03-20 [RainbowDolphin] File preparation for LDraw Parts Tracker
Status:
1 'hold' vote. (CHN)
Size: 53865 bytes
Reviewers' certifications:
Holly-Wood=hold MMR1988=certify
Required (unofficial) subfiles:
(none)
Related (unofficial) subfiles:
(none)
File reviews and updates:
At Sat May 8 16:45:01 2021, the following review was posted:
Reviewer: MagFors
Certification: hold
Comments:
Why is the middle section divided into 2 halves?
These surface are flat:
4 4 6.84 -8 -2.508 6.84 -20.5 -2.508 4.555 -20.5 -4 4.49 -8 -4
4 4 0 -8 2.424 0 -20.5 2.424 1.514 -20.5 3.298 1.514 -8 3.298
I think you could eliminate all on the vertices in between.
Some condlines are missing.
I think this surface should not be concave.
3 9 -6.816 -4.1 2.508 -3.203 -4.1 4 -2.395 0 4
3 9 -2.395 0 4 -5.443 0 2.344 -6.816 -4.1 2.508
3 9 -3.203 -4.1 4 -6.816 -4.1 2.508 -4.49 -8 4
On all 4 "sides".
Same here:
3 16 -4.555 -21.775 -4.578 -3.251 -23.152 -5.25 -4.227 -24.867 -4.663
3 16 -4.227 -24.867 -4.663 -3.251 -23.152 -5.25 -3.475 -24.325 -5.25
Should be convex, not concave. On all 4 "sides".
I think this should be an edgeline:
2 9 0 -20.5 -2.424 0 -8 -2.424
On both sides.
Reviewer: MagFors
Certification: hold
Comments:
Why is the middle section divided into 2 halves?
These surface are flat:
4 4 6.84 -8 -2.508 6.84 -20.5 -2.508 4.555 -20.5 -4 4.49 -8 -4
4 4 0 -8 2.424 0 -20.5 2.424 1.514 -20.5 3.298 1.514 -8 3.298
I think you could eliminate all on the vertices in between.
Some condlines are missing.
I think this surface should not be concave.
3 9 -6.816 -4.1 2.508 -3.203 -4.1 4 -2.395 0 4
3 9 -2.395 0 4 -5.443 0 2.344 -6.816 -4.1 2.508
3 9 -3.203 -4.1 4 -6.816 -4.1 2.508 -4.49 -8 4
On all 4 "sides".
Same here:
3 16 -4.555 -21.775 -4.578 -3.251 -23.152 -5.25 -4.227 -24.867 -4.663
3 16 -4.227 -24.867 -4.663 -3.251 -23.152 -5.25 -3.475 -24.325 -5.25
Should be convex, not concave. On all 4 "sides".
I think this should be an edgeline:
2 9 0 -20.5 -2.424 0 -8 -2.424
On both sides.
At Sun May 9 06:25:01 2021, the following review was posted:
Reviewer: MagFors
Certification: hold
Comments:
Here are some images of these parts:
https://images.brickset.com/sets/AdditionalImages/41125-1/41125_alt10.jpg
https://images.brickset.com/sets/AdditionalImages/3188-1/3188_alt5.jpg
I was wrong. There's no edge line in the indentation
Reviewer: MagFors
Certification: hold
Comments:
Here are some images of these parts:
https://images.brickset.com/sets/AdditionalImages/41125-1/41125_alt10.jpg
https://images.brickset.com/sets/AdditionalImages/3188-1/3188_alt5.jpg
I was wrong. There's no edge line in the indentation
At Tue Sep 7 14:20:02 2021, a new version of the file was submitted.
Submitted by: RainbowDolphin
Comments:
Fixed, thanks for review.
Existing certification-votes were deleted.
Submitted by: RainbowDolphin
Comments:
Fixed, thanks for review.
Existing certification-votes were deleted.
At Thu Oct 7 17:35:01 2021, the following review was posted:
Reviewer: MagFors
Certification: hold
Comments:
Looks better now.
Bad control point on this line:
5 24 7.75 -8 0 6.84 -8 -2.508 6.84 -20.5 -2.508 -2.72 -5.25 .21
Reviewer: MagFors
Certification: hold
Comments:
Looks better now.
Bad control point on this line:
5 24 7.75 -8 0 6.84 -8 -2.508 6.84 -20.5 -2.508 -2.72 -5.25 .21
At Sun Oct 17 13:15:01 2021, a new version of the file was submitted.
Submitted by: RainbowDolphin
Comments:
Corrected
Existing certification-votes were deleted.
Submitted by: RainbowDolphin
Comments:
Corrected
Existing certification-votes were deleted.
At Mon Oct 18 16:45:01 2021, the following review was posted:
Reviewer: MagFors
Certification: hold
Comments:
Sorry, I totally missed these bad lines
5 4 -4.49 -8 4 -2.395 0 4 -5.443 0 2.344 2.395 0 4
5 4 4.49 -8 4 2.395 0 4 5.443 0 2.344 -2.395 0 4
5 4 4.49 -8 -4 2.395 0 -4 5.443 0 -2.344 -2.395 0 -4
5 4 -4.49 -8 -4 -2.395 0 -4 -5.443 0 -2.344 2.395 0 -4
Reviewer: MagFors
Certification: hold
Comments:
Sorry, I totally missed these bad lines
5 4 -4.49 -8 4 -2.395 0 4 -5.443 0 2.344 2.395 0 4
5 4 4.49 -8 4 2.395 0 4 5.443 0 2.344 -2.395 0 4
5 4 4.49 -8 -4 2.395 0 -4 5.443 0 -2.344 -2.395 0 -4
5 4 -4.49 -8 -4 -2.395 0 -4 -5.443 0 -2.344 2.395 0 -4
At Mon Oct 18 17:25:02 2021, the following review was posted:
Reviewer: MMR1988
Certification: novote
Comments:
Should get a different number 98393f.
Number issue is on all parts of this multiset. Exept of the already official 98393d.
Reviewer: MMR1988
Certification: novote
Comments:
Should get a different number 98393f.
Number issue is on all parts of this multiset. Exept of the already official 98393d.
At Sun Oct 24 07:57:27 2021 part 'parts/1010462.dat' was renamed to 'parts/98393f.dat'.
At Sat Mar 5 05:55:01 2022, a new version of the file was submitted.
Submitted by: RainbowDolphin
Comments:
Corrected bad condlines
Existing certification-votes were deleted.
Submitted by: RainbowDolphin
Comments:
Corrected bad condlines
Existing certification-votes were deleted.
At Tue Mar 15 21:20:01 2022, the following review was posted:
Reviewer: MMR1988
Certification: certify
No comments were posted with this review.
Reviewer: MMR1988
Certification: certify
No comments were posted with this review.
At Tue May 3 19:50:01 2022, the following review was posted:
Reviewer: Holly-Wood
Certification: hold
Comments:
Missing conds.
5 24 -6.84 -8 2.508 -4.49 -8 4 -6.84 -20.5 2.508 -6.816 -4.1 2.508
5 24 2.623 -21.775 -4.976 3.203 -20.5 -4 4.555 -20.5 -4 0 -21.652 -4.985
5 24 6.84 -8 -2.508 4.49 -8 -4 6.816 -4.1 -2.508 6.84 -20.5 -2.508
5 24 -2.623 -21.775 4.976 -3.203 -20.5 4 0 -21.652 4.985 -4.555 -20.5 4
Reviewer: Holly-Wood
Certification: hold
Comments:
Missing conds.
5 24 -6.84 -8 2.508 -4.49 -8 4 -6.84 -20.5 2.508 -6.816 -4.1 2.508
5 24 2.623 -21.775 -4.976 3.203 -20.5 -4 4.555 -20.5 -4 0 -21.652 -4.985
5 24 6.84 -8 -2.508 4.49 -8 -4 6.816 -4.1 -2.508 6.84 -20.5 -2.508
5 24 -2.623 -21.775 4.976 -3.203 -20.5 4 0 -21.652 4.985 -4.555 -20.5 4
3D View