Unofficial File parts/72046.dat
File Header:
0 Tile 1 x 1 x 0.5 Round with Raised Star Gem
0 Name: 72046.dat
0 Author: Takeshi Takahashi [RainbowDolphin]
0 !LDRAW_ORG Unofficial_Part
0 !LICENSE Redistributable under CCAL version 2.0 : see CAreadme.txt
0 BFC CERTIFY CCW
Status:
2 subfiles aren't certified. (CCSSN)
Size: 328 bytes
Reviewers' certifications:
MagFors=certify Philo=certify
Required (unofficial) subfiles:
Needs admin review. (CCN)Related (unofficial) subfiles:
(none)
File reviews and updates:
At Mon Feb 15 22:25:01 2021, the following review was posted:
Reviewer: MagFors
Certification: hold
Comments:
I've bought a bag of these. Philo is correct. There is a pentagonal cone on the bottom side of the gem.
Rotated 36 degrees so that the point on the cone points to the sides on the pentagon.
It is also very deep/tall. 6 ldu.
I know it is a very small part, but I think all the odd shapes should be made. The cavity on the bottom is square, but with soft corners.
The groove around the bottom edge has two flat sides. And the little semi hole on the side is intended, designed.
We've said that there shouldn't be edge lines between subparts in a dual moulded part, but here there's an obvious angle that require an edge line.
Reviewer: MagFors
Certification: hold
Comments:
I've bought a bag of these. Philo is correct. There is a pentagonal cone on the bottom side of the gem.
Rotated 36 degrees so that the point on the cone points to the sides on the pentagon.
It is also very deep/tall. 6 ldu.
I know it is a very small part, but I think all the odd shapes should be made. The cavity on the bottom is square, but with soft corners.
The groove around the bottom edge has two flat sides. And the little semi hole on the side is intended, designed.
We've said that there shouldn't be edge lines between subparts in a dual moulded part, but here there's an obvious angle that require an edge line.
At Sat Feb 27 14:55:01 2021, the following review was posted:
Reviewer: MagFors
Certification: certify
No comments were posted with this review.
Reviewer: MagFors
Certification: certify
No comments were posted with this review.
At Tue Mar 9 09:20:01 2021, the following review was posted:
Reviewer: Philo
Certification: certify
No comments were posted with this review.
Reviewer: Philo
Certification: certify
No comments were posted with this review.
3D View