Unofficial File parts/71603.dat
part image
File Header:
0 ~Electric Light & Sound Insectoid Tail  4 x 20 x  3 (Needs Work)
0 Name: 71603.dat
0 Author: Paul Easter [pneaster]
0 !LDRAW_ORG Unofficial_Part
0 !LICENSE Redistributable under CCAL version 2.0 : see CAreadme.txt

0 BFC CERTIFY CCW

0 !HISTORY 2006-12-17 [mikeheide] Fixed bowtie quads, delete identical lines, addes space to part name
0 !HISTORY 2007-09-16 [mikeheide] Fixed wrong dimensions
0 !HISTORY 2018-01-14 [Steffen]   split into multiple parts

0 // Needs work: geometry correction needed at top buttons field

0 // battery cover
0 BFC INVERTNEXT
Status:
Needs more votes. (N)
Size: 9932 bytes
Reviewers' certifications:
MagFors=novote
Required (unofficial) subfiles:
(none)
Related (unofficial) subfiles:
Electric Light & Sound Insectoid Tail 4 x 20 x 3 (Complete)
Status: 4 subfiles aren't certified. (SSSSN)
File reviews and updates:
At Fri Oct 24 01:12:03 2003, the file was initially submitted.
Submitted by: pneaster
Comments:
I have been asked to release this part as is. If someone wants to finish it, go ahead, please leave a note if you do.

The header line was too long with the "Needs work" tag, so I put it a few lines down.

At Fri Jan 23 22:22:02 2004, the following review was posted:

Reviewer: Steffen
Certification: novote
Comments:
I think the part measurements and the word "piece" is not necessary in the name.
Then you get space for adding "needs work" there

At Sun Feb 29 01:20:03 2004, the following review was posted:

Reviewer: fwcain
Certification: novote
No comments were posted with this review.

At Sat Oct 30 23:18:01 2004, the following review was posted:

Reviewer: Steffen
Certification: hold
Comments:
2 bowtie quads, many identical lines, part name is missing spaces

At Fri Dec 8 02:54:04 2006, the following review was posted:

Reviewer: pneaster
Certification: novote
Comments:
Please update this part as needed. I am not working on it anymore.

At Sun Dec 17 09:50:04 2006, a new version of the file was submitted.
Submitted by: mikeheide
Existing certification-votes were deleted.
At Sun Dec 17 09:54:22 2006, a new version of the file was submitted.
Submitted by: mikeheide
At Sun Sep 16 08:04:02 2007, the following review was posted:

Reviewer: mikeheide
Certification: hold
Comments:
Part has wrong dimensions. From the 2x2 Extension to the upper plate section it has to be 2 Bricks high and not 2 1/3.

At Sun Sep 16 08:54:03 2007, a new version of the file was submitted.
Submitted by: mikeheide
Comments:
Panelfield has to be adjusted.

Existing certification-votes were deleted.
At Sun May 11 15:05:25 2008 part 'parts/x520.dat' was renamed to 'parts/71603.dat'.
At Thu May 28 00:34:02 2009, the following review was posted:

Reviewer: Steffen
Certification: hold
Comments:
"Work)" is missing from part name.

To make room for it, "Piece" should be removed from part name,
as every LEGO part is a "piece" in some way IMHO.

At Thu May 28 09:12:04 2009, the following review was posted:

Reviewer: Holly-Wood
Certification: novote
Comments:
Edited header

At Thu May 28 17:04:01 2009, the following review was posted:

Reviewer: Steffen
Certification: novote
Comments:
removing hold

At Sat Jun 20 09:36:02 2009, the following review was posted:

Reviewer: Steffen
Certification: hold
Comments:
I see BFC errors

At Fri Apr 2 19:40:12 2010, the following review was posted:

Reviewer: mikeheide
Certification: novote
Comments:
I have seen the BFC errors too. Will correct next time.

At Fri Apr 2 19:45:12 2010, the following review was posted:

Reviewer: arezey
Certification: hold
Comments:
This file should be 71603c01.dat. I do not have the part, but I believe that 71603 is the design ID of the base part itself instead of the full composite.

The part should also be split into its composing parts.

At Fri Apr 2 19:50:04 2010, the following review was posted:

Reviewer: Philo
Certification: novote
Comments:
No, as far as I can tell 71603 _is_ the complete thing.

At Fri Apr 2 19:50:04 2010, the following review was posted:

Reviewer: mikeheide
Certification: novote
Comments:
I am surely do not break my part. So I will leave it like it is! If you only guess the part number then we can leave it like it is.

At Fri Apr 2 19:55:02 2010, the following review was posted:

Reviewer: arezey
Certification: hold
Comments:
OK. But it still needs to be split..

At Sun Dec 11 17:00:07 2011, the following review was posted:

Reviewer: Steffen
Certification: hold
Comments:
thread http://forums.ldraw.org/read.php?19,214,323#msg-323
has finally solved the metal color problem.
383 = lacquered plastic
494 = real metal
so 383 is wrong here, replace by 494
At Sat Feb 4 06:10:03 2012, the following review was posted:

Reviewer: Steffen
Certification: hold
Comments:
- yes, splitup into u....dat ~Parts should happen
- still has BFC errors
- the top surface with the black buttons has wrong coordinates, it does not meet its neighbors correctly

At Thu Jan 31 00:40:02 2013, the following review was posted:

Reviewer: Steffen
Certification: hold
Comments:
and type needs to be changed to shortcut IMHO

At Wed Aug 7 20:30:16 2013, the following review was posted:

Reviewer: Steffen
Certification: hold
Comments:
please also remove usage of light.dat

At Wed Aug 7 20:50:08 2013, a new version of the file was submitted.
Submitted by: Steffen
Comments:
- removed light.dat references
- used stugs
- corrected 1 bottom stud
- removed part brick 2x2 usage, instead inlined its geometry

Existing certification-votes were deleted.
At Wed Aug 7 20:50:13 2013, the following review was posted:

Reviewer: Steffen
Certification: hold
Comments:
restoring hold, this file still has problems

At Sun Jan 14 14:00:02 2018, a new version of the file was submitted.
Submitted by: Steffen
Comments:
split file into separate ~parts

Existing certification-votes were deleted.
At Sun Jan 14 19:25:01 2018, the following review was posted:

Reviewer: MagFors
Certification: novote
Comments:
This is also an assembly of two, or more, parts.
https://www.bricklink.com/catalogItemInv.asp?P=x239