Unofficial File parts/6644-f1.dat
part image
File Header:
0 Technic Flex-System Ball Connector Open
0 Name: 6644-f1.dat
0 Author: Miguel Agullo [MiguelAgullo]
0 !LDRAW_ORG Unofficial_Part
0 !LICENSE Redistributable under CCAL version 2.0 : see CAreadme.txt

0 BFC CERTIFY CCW

0 !HISTORY 2002-08-02 [rosco] tidied up, fix orientation, BFC
0 !HISTORY 2007-11-02 [mikeheide] fixed outer ring edges
0 !HISTORY 2016-06-11 [Holly-Wood] Complete overhaul, subfiled

Status:
2 subfiles aren't certified. (SSN)
Size: 502 bytes
Reviewers' certifications:
(no current reviews for this file)
Required (unofficial) subfiles:
~Technic Flex-System Ball Connector Bottom
Status: 1 subfile isn't certified. (SN)
~Technic Flex-System Connector Top
Status: Needs more votes. (N)
Related (unofficial) subfiles:
(none)
File reviews and updates:
At Fri Aug 2 23:32:05 2002, the file was initially submitted.
Submitted by: rosco
At Tue Aug 6 20:34:03 2002, the following review was posted:

Reviewer: Philo
Certification: hold
Comments:
- See x345
- The 1-4con2 primitives (cable attachment), seen from inside, should receive a BFC INVERTNEXT to prevent bad orientation when this primitive is BFC certified

At Mon Aug 12 13:49:29 2002 part 'parts/x345a.dat' was renamed to 'parts/6644a.dat'.
At Thu Aug 15 09:26:06 2002, a new version of the file was submitted.
Submitted by: rosco
Comments:
fixed incorrect quad
added BFC INVERTNEXT to cone primitives

Existing certification-votes were deleted.
At Fri Sep 6 17:52:03 2002, the following review was posted:

Reviewer: OrionP
Certification: certify
No comments were posted with this review.

At Tue Oct 1 03:54:03 2002, the following review was posted:

Reviewer: technog
Certification: novote
Comments:
This part looks good but I question the need for an open version of this part?

At Wed Oct 30 19:44:03 2002, the following review was posted:

Reviewer: jvan
Certification: certify
No comments were posted with this review.

At Thu Jan 16 00:30:04 2003, the following review was posted:

Reviewer: technog
Certification: hold
Comments:
I have taken another more thorough look at this part and found numerous errors - to many to list here.
I'll forward an email to the author with my suggestions.

At Fri Sep 10 07:32:03 2004, the following review was posted:

Reviewer: rosco
Certification: novote
Comments:
I have not received your email, please list them here so I can fix the part, or feel free to fix them yourself.

At Wed Oct 27 18:42:00 2004, the following review was posted:

Reviewer: sbliss
Certification: hold
Comments:
Please rotate this part so the 'cable' hole is facing along the -Z axis, and the part is lying flat -- that is, so the open face is upward, and the claspe is on the +X side. In other words, rotate 90 degrees counterclockwise around the Y axis, then rotate 90 clockwise around the Z axis.

At Thu Oct 28 21:26:03 2004, a new version of the file was submitted.
Submitted by: rosco
Comments:
Fix orientation and some BFC errors

Existing certification-votes were deleted.
At Thu Jul 13 16:46:02 2006, the following review was posted:

Reviewer: WilliamH
Certification: novote
Comments:
The open form of this part is useful for parts lists (BOMs) when creating instructions

At Thu Jul 13 16:54:05 2006, the following review was posted:

Reviewer: WilliamH
Certification: hold
Comments:
2-4ndis's overlap ring4's (and quads in this area)

outer 4-4edge's and 4-4cyli should be replace by 2-4 versions and remaining gaps correctly closed with quads and lines

At Sun Jul 16 19:46:02 2006, the following review was posted:

Reviewer: WilliamH
Certification: novote
No comments were posted with this review.

At Fri Nov 2 16:46:02 2007, a new version of the file was submitted.
Submitted by: mikeheide
Existing certification-votes were deleted.
At Tue Nov 30 19:20:05 2010, the following review was posted:

Reviewer: Steffen
Certification: hold
Comments:
- edgelines missing when you peek into the bottom rectangular hole
- edgelines missing when you peek into the bottom circular hole
- I'd like to hear some opinions about part numbering 6644.dat vs. 6644a.dat - what do you think?

At Tue Nov 30 19:25:02 2010, the following review was posted:

Reviewer: Steffen
Certification: hold
Comments:
additionally, the edgelines on the top surface (at the top arch) don't meet properly

At Sun May 22 23:25:02 2011, the following review was posted:

Reviewer: Steffen
Certification: hold
Comments:
additionally, the numbering needs tidying up
(6644.dat vs. 6644a.dat)

At Sat Jul 30 02:20:05 2011, the following review was posted:

Reviewer: Steffen
Certification: hold
Comments:
additionally, the line
0 Mods:
should be converted into a normal
0 !HISTORY
line

At Sat Jun 11 14:50:00 2016, a new version of the file was submitted.
Submitted by: Holly-Wood
Comments:
Complete overhaul. This was really, really, really messy.

Existing certification-votes were deleted.
At Sun Jun 12 11:00:00 2016, the following review was posted:

Reviewer: MagFors
Certification: novote
Comments:
Who is Miguel Agullo? He is not listed in the list of authors.
http://www.ldraw.org/cgi-bin/tracker/ptuserlist.cgi

I guess this should be divided into sub-sections like the suitcase 4449,
to be reused in 6644 and 6644c01?

At Sun Jun 12 13:30:00 2016, the following review was posted:

Reviewer: Philo
Certification: novote
Comments:
"Who is Miguel Agullo?"
Among other things, he's one of the co-authors of "Lego Software Power Tools With LDraw MLCad and LPub" book...

At Wed Jun 22 20:20:00 2016, the following review was posted:

Reviewer: MMR1988
Certification: novote
Comments:
Except of the missing condlines:
5 24 9.2388 -5 -3.82683 9.2388 5 -3.82683 10 5 0 9 5 -4.2
5 24 -9.23871 5 -3.8268 -9.23871 -5 -3.8268 -10 5 0 -9 -5 -4.2
the part is fine.

Anyway, Magnus is right, this part should be divided to create a closed c01 version

At Fri Jun 24 19:35:01 2016, the following review was posted:

Reviewer: MagFors
Certification: hold
Comments:
Upgrade to Hold for the above reasons.

At Mon Dec 4 15:20:00 2017, the following review was posted:

Reviewer: Holly-Wood
Certification: novote
Comments:
Substituted with http://www.ldraw.org/cgi-bin/ptdetail.cgi?s=6644-f1

At Mon Dec 4 16:52:42 2017 part 'parts/6644a.dat' was renamed to 'parts/6644-f1.dat'.
At Mon Dec 4 16:55:00 2017, a new version of the file was submitted.
Submitted by: Holly-Wood
Existing certification-votes were deleted.
At Mon Dec 4 20:55:00 2017 a Parts Tracker Admin edited the header.
At Tue Jan 2 18:10:01 2018, a new version of the file was submitted.
Submitted by: MagFors