Unofficial File parts/6237277a.dat
part image
File Header:
0 Sticker  1.9 x  1.8 with Red Number '1' on Blue Panel on Yellow Background
0 Name: 6237277a.dat
0 Author: Alex Herrera [alanbrito98]
0 !LDRAW_ORG Unofficial_Part
0 !LICENSE Redistributable under CCAL version 2.0 : see CAreadme.txt

0 BFC CERTIFY CCW

0 !KEYWORDS set 21311, Voltron

0 !HISTORY 2021-11-04 [Holly-Wood] Adjusted hight

0 // Box
0 // Bottom
0 // Primitives
Status:
1 'hold' vote. (CHN)
Size: 4326 bytes
Reviewers' certifications:
MMR1988=hold
MagFors=certify
Required (unofficial) subfiles:
(none)
Related (unofficial) subfiles:
(none)
File reviews and updates:
At Sun Jul 19 00:05:01 2020, the file was initially submitted.
Submitted by: alanbrito98
At Fri Jul 24 13:10:01 2020, a new version of the file was submitted.
Submitted by: alanbrito98
Comments:
Fixed errors and redraw stjcker

At Fri Jul 24 17:15:02 2020, the following review was posted:

Reviewer: MagFors
Certification: hold
Comments:
I think you got the dimensions wrong.
It is now 35.361 x 36.009 ldu. If you make it 36x36 ldu, then the description should be 1.8 x 1.8. It should fit a 2x2 tile/slope. Right?

When I look at this print I see a Red nr1 on a Blue panel on a Yellow background. Not a blue background.

There are some gaps along two of the sides.
2 4 17.9 -.25 10.912 17.9 -.25 4.137
2 4 -14.845 -.25 -17.622 -.527 -.25 -17.7

And there's also some pointless vertices here:
2 5 -18.017 -.25 -7.023 -18.017 -.25 -2.16
2 5 -.217 -.25 15.495 -.211 -.25 17.687
2 5 -.578 -.25 -15.394 -.527 -.25 -17.7

The rounded corners should be made using primitives, so that we can have condlines on the rounded surface.
1 11 14.4 0 14 3.6 0 0 0 -1 0 0 0 3.6 1-4chrd.dat
1 11 14.4 0 14 3.6 0 0 0 -.25 0 0 0 3.6 1-4cyli.dat
1 12 14.4 -.25 14 3.6 0 0 0 1 0 0 0 3.6 1-4chrd.dat
You have created your own condlines. They all seem ok, except this one:
5 24 -18.017 0 -14.115 -18.017 -0.25 -14.115 -18.017 0 -15.479 -18.017 0 14.106
But please use primitives instead.

Edge lines are not allowed in stickers. (Except when they are folded around a sharp corner. Like on a 2x2 brick, 3003.)
1 16 -18.017 -0.125 -14.797 0 1 0 0 0 -0.125 -0.682 0 0 rect1.dat

A good start, but I have to Hold-vote it.

At Thu Jul 30 08:40:02 2020, a new version of the file was submitted.
Submitted by: alanbrito98
Comments:
Fixed new erros. Please validate the fille again. Thank you.

Existing certification-votes were deleted.
At Thu Jul 30 09:45:01 2020, the following review was posted:

Reviewer: cwdee
Certification: novote
Comments:
What happened to the rounded corners?

At Mon Aug 3 10:05:01 2020, a new version of the file was submitted.
Submitted by: alanbrito98
Comments:
Added missing rounded corners.

Existing certification-votes were deleted.
At Mon Aug 3 11:35:01 2020, the following review was posted:

Reviewer: MagFors
Certification: novote
Comments:
Here is a good tool that will help you shape the formed sticker.
https://c-mt.dk/software/pf/

The former shape 11477 will give your sticker the correct shape, but it might still need some cleaning. The top surface should still be 0.25 ldu above the part.

At Sat Aug 29 14:00:02 2020, the following review was posted:

Reviewer: MagFors
Certification: hold
Comments:
This pattern is too small.
Photos of the real part doesnt show a black border around the yellow background, hence the print is too small.
https://www.bricklink.com/v2/catalog/catalogitem.page?P=15068pb178

The black border around each of the stickers should not be included. If you look close at this image there's a thin, vague line on the blue, red and grey design.
It is the cut line from the tool in the manufacturing of the sticker. That's the outer edge of the sticker and should fit the backside box dimensions.
https://www.bricklink.com/v2/catalog/catalogitem.page?P=21311stk01

At Fri Oct 30 12:15:01 2020, a new version of the file was submitted.
Submitted by: alanbrito98
Existing certification-votes were deleted.
At Fri Oct 30 21:40:01 2020, the following review was posted:

Reviewer: MMR1988
Certification: certify
No comments were posted with this review.

At Sun Dec 13 04:00:02 2020, a new version of the file was submitted.
Submitted by: alanbrito98
Comments:
Fixed.

Existing certification-votes were deleted.
At Tue Jan 5 15:50:02 2021, the following review was posted:

Reviewer: MagFors
Certification: hold
Comments:
The orientation is wrong. It should be like the other four stickers.
(But it's OK to have the formed sticker upside down, since the matching brick is orientated like it is, and the placement of the sticker is like it is.)

IMHO it is better to not subfile the pattern surface. It will simplify the flat sticker and avoid tiny overlapping.
But a common, reused backside subfile is good practice. All 5 sticker have the same size.

At Tue Feb 23 00:25:01 2021, a new version of the file was submitted.
Submitted by: alanbrito98
Comments:
New version. Used a unique file for the sticker, instead of subfiles.
Existing certification-votes were deleted.
At Tue Feb 23 06:05:02 2021 a Parts Tracker Admin edited the header.
At Wed Feb 24 21:40:02 2021, the following review was posted:

Reviewer: Holly-Wood
Certification: hold
Comments:
* Number 1 is taller than the other 4
* Measured the color in PS. This is not "191 - Bright light orange" but a simple "14 - Yellow" as in the other 4

At Sun Feb 28 12:10:02 2021, a new version of the file was submitted.
Submitted by: alanbrito98
Comments:
* Fixed number size.
* Change color to yellow

Existing certification-votes were deleted.
At Mon Mar 1 17:45:01 2021, the following review was posted:

Reviewer: Holly-Wood
Certification: hold
Comments:
Sorry, apparently I wasn't as clear as I should have been. I was talking about the overall size. This is not a 1.8x1.8 square sticker but taller as the rest.

At Fri Nov 5 20:35:01 2021, a new version of the file was submitted.
Submitted by: Holly-Wood
Comments:
Adjusted hight

Existing certification-votes were deleted.
At Fri Nov 12 21:40:01 2021, the following review was posted:

Reviewer: MMR1988
Certification: hold
Comments:
Contains a modelling comment at the end:

0 !LPE DISTANCE 7 -15 -.25 19 -15 -.25 -19

At Sat Nov 13 09:20:01 2021, a new version of the file was submitted.
Submitted by: Holly-Wood
Existing certification-votes were deleted.
At Sat Nov 13 13:50:01 2021, the following review was posted:

Reviewer: MMR1988
Certification: certify
No comments were posted with this review.

At Tue Nov 30 22:40:01 2021, the following review was posted:

Reviewer: MagFors
Certification: certify
No comments were posted with this review.

At Sat Dec 11 17:00:01 2021, the following review was posted:

Reviewer: MMR1988
Certification: hold
Comments:
If the formed version is 1.8 x 1.8 why is this file 1.9 x 1.8 then?