Unofficial File parts/49308p01.dat
File Header:
0 Cylinder 3 x 3 with Dome Top with Open Stud with Happy Face and Icecream Topping Pattern
0 Name: 49308p01.dat
0 Author: Evert-Jan Boer [ejboer]
0 !LDRAW_ORG Unofficial_Part
0 !LICENSE Redistributable under CCAL version 2.0 : see CAreadme.txt
0 BFC CERTIFY CCW
0 !KEYWORDS Bricklink 49308pb001, Set 70822
Status:
1 subfile isn't certified. (SN)
Size: 253551 bytes
Reviewers' certifications:
GeraldLasser=novote MMR1988=novote MagFors=novote OrionP=novote Philo=novote
Required (unofficial) subfiles:
Related (unofficial) subfiles:
(none)
File reviews and updates:
At Sun Jan 30 19:05:01 2022, the following review was posted:
Reviewer: MMR1988
Certification: certify
No comments were posted with this review.
Reviewer: MMR1988
Certification: certify
No comments were posted with this review.
At Mon Jan 31 16:45:01 2022, the following review was posted:
Reviewer: MagFors
Certification: novote
Comments:
This description is way too long.
IMO, when there are only a small number of different patterns, there is no need for a long and complicated description.
May I suggest something like this instead:
Cylinder 3 x 3 with Dome Top with Happy Face and Icecream Topping Pattern
As of today there's only three different prints to describe. And they all have a "Open Stud", so there's no need to include that.
p01, Cylinder 3 x 3 with Dome Top with Happy Face and Icecream Topping Pattern
p02, Cylinder 3 x 3 with Dome Top with Blue Mouth and Eyes Pattern
p03, Cylinder 3 x 3 with Dome Top with Magenta Mouth and 4 Eyes Pattern
Reviewer: MagFors
Certification: novote
Comments:
This description is way too long.
IMO, when there are only a small number of different patterns, there is no need for a long and complicated description.
May I suggest something like this instead:
Cylinder 3 x 3 with Dome Top with Happy Face and Icecream Topping Pattern
As of today there's only three different prints to describe. And they all have a "Open Stud", so there's no need to include that.
p01, Cylinder 3 x 3 with Dome Top with Happy Face and Icecream Topping Pattern
p02, Cylinder 3 x 3 with Dome Top with Blue Mouth and Eyes Pattern
p03, Cylinder 3 x 3 with Dome Top with Magenta Mouth and 4 Eyes Pattern
At Thu Feb 10 21:25:01 2022 a Parts Tracker Admin edited the header.
At Thu Feb 10 21:25:01 2022, the following review was posted:
Reviewer: MMR1988
Certification: certify
Comments:
Shortened the description as suggested.
Reviewer: MMR1988
Certification: certify
Comments:
Shortened the description as suggested.
At Thu Feb 10 21:35:01 2022, the following review was posted:
Reviewer: MagFors
Certification: novote
Comments:
Please also remove some of the keywords since they are used in the new description.
Reviewer: MagFors
Certification: novote
Comments:
Please also remove some of the keywords since they are used in the new description.
At Fri Feb 11 21:50:01 2022 a Parts Tracker Admin edited the header.
At Fri Feb 11 21:50:02 2022, the following review was posted:
Reviewer: GeraldLasser
Certification: novote
Comments:
Removed keywords present in title
Reviewer: GeraldLasser
Certification: novote
Comments:
Removed keywords present in title
At Sat Feb 12 05:25:01 2022, the following review was posted:
Reviewer: OrionP
Certification: novote
Comments:
The description is now incorrect. You can't omit "with Open Stud". From the spec:
"The description of a patterned part should in the following format:
<base part description> with <pattern description> Pattern"
Reviewer: OrionP
Certification: novote
Comments:
The description is now incorrect. You can't omit "with Open Stud". From the spec:
"The description of a patterned part should in the following format:
<base part description> with <pattern description> Pattern"
At Sat Feb 12 08:15:01 2022, the following review was posted:
Reviewer: MagFors
Certification: novote
Comments:
If so, let's remove "with Open Stud" from the base part.
Reviewer: MagFors
Certification: novote
Comments:
If so, let's remove "with Open Stud" from the base part.
At Sat Feb 12 08:30:01 2022 a Parts Tracker Admin edited the header.
At Sat Feb 12 08:30:02 2022, the following review was posted:
Reviewer: MMR1988
Certification: certify
Comments:
You are right, missed both issues. :-(
Fixed the description by adding Stud description.
Reviewer: MMR1988
Certification: certify
Comments:
You are right, missed both issues. :-(
Fixed the description by adding Stud description.
At Sat Feb 12 08:35:01 2022, the following review was posted:
Reviewer: MMR1988
Certification: novote
Comments:
As there is no other stud variant, this seems a good idea.
Reviewer: MMR1988
Certification: novote
Comments:
As there is no other stud variant, this seems a good idea.
At Sat Feb 12 09:00:01 2022, the following review was posted:
Reviewer: Philo
Certification: novote
Comments:
Maybe we should discuss this on the forum instead but...
- for the part itself specifying the stud type is rather meaningless since there is no other stud type variant. Rebrickable name (...with center stud) is marginally more significant to mean that there _is_ a stud.
- I don't see the point of specifying stud variant qualifier on patterned version if the pattern exist only on one variant.
Reviewer: Philo
Certification: novote
Comments:
Maybe we should discuss this on the forum instead but...
- for the part itself specifying the stud type is rather meaningless since there is no other stud type variant. Rebrickable name (...with center stud) is marginally more significant to mean that there _is_ a stud.
- I don't see the point of specifying stud variant qualifier on patterned version if the pattern exist only on one variant.
At Sat Feb 12 09:25:01 2022, the following review was posted:
Reviewer: MMR1988
Certification: novote
Comments:
There it is:
https://forums.ldraw.org/thread-26033.html
Reviewer: MMR1988
Certification: novote
Comments:
There it is:
https://forums.ldraw.org/thread-26033.html
3D View