Unofficial File parts/46835.dat
File Header:
0 Technic Clutch with Axle Connector Inner Side
0 Name: 46835.dat
0 Author: Philippe Hurbain [Philo]
0 !LDRAW_ORG Unofficial_Part
0 !LICENSE Redistributable under CCAL version 2.0 : see CAreadme.txt
0 BFC CERTIFY CCW
0 !KEYWORDS Torque limiter
Status:
2 subfiles aren't certified. (CCSSN)
Size: 10136 bytes
Reviewers' certifications:
GeraldLasser=certify MMR1988=certify Philo=novote
Required (unofficial) subfiles:
Needs admin review. (CCF)Related (unofficial) subfiles:
(none)
File reviews and updates:
At Sun Nov 17 13:05:01 2019, the following review was posted:
Reviewer: MagFors
Certification: hold
Comments:
Unmatched edges:
2 4 -5.206839301 4.60826427 10 -10.606667072 10.606650328 10
2 4 -4.60826427 5.206839301 10 -10.606667072 10.606650328 10
2 4 3.9341 14.6824 6 -10.7483 10.7483 6
2 4 -10.7483 10.7483 6 -14.682522372 -3.934167528 6
Collision between the two parts here:
2 4 -14.682522372 -3.934167528 -6 -14.6824 -3.9341 1
2 4 3.9341 14.6824 1 3.934167528 14.682522372 -6
2 4 10.7483 -10.7483 1 10.748354844 -10.748354844 -6
Are these parts easy to disassemble or would a builder look for an assembly in the library?
Reviewer: MagFors
Certification: hold
Comments:
Unmatched edges:
2 4 -5.206839301 4.60826427 10 -10.606667072 10.606650328 10
2 4 -4.60826427 5.206839301 10 -10.606667072 10.606650328 10
2 4 3.9341 14.6824 6 -10.7483 10.7483 6
2 4 -10.7483 10.7483 6 -14.682522372 -3.934167528 6
Collision between the two parts here:
2 4 -14.682522372 -3.934167528 -6 -14.6824 -3.9341 1
2 4 3.9341 14.6824 1 3.934167528 14.682522372 -6
2 4 10.7483 -10.7483 1 10.748354844 -10.748354844 -6
Are these parts easy to disassemble or would a builder look for an assembly in the library?
At Sun Nov 17 14:30:01 2019, the following review was posted:
Reviewer: MagFors
Certification: hold
Comments:
Missing edges on two of the three arms
2 4 -7.759345 -6.041128 6 -7.759345 -6.041128 1
2 4 -9.730565 1.354723 6 -9.730565 1.354723 1
2 4 6.041128 7.759345 1 6.041128 7.759345 6
2 4 -1.354723 9.730565 1 -1.354723 9.730565 6
Reviewer: MagFors
Certification: hold
Comments:
Missing edges on two of the three arms
2 4 -7.759345 -6.041128 6 -7.759345 -6.041128 1
2 4 -9.730565 1.354723 6 -9.730565 1.354723 1
2 4 6.041128 7.759345 1 6.041128 7.759345 6
2 4 -1.354723 9.730565 1 -1.354723 9.730565 6
At Sun Nov 17 16:00:01 2019, a new version of the file was submitted.
Submitted by: Philo
Comments:
Corrected mismatched vertices and missing edge lines
Existing certification-votes were deleted.
Submitted by: Philo
Comments:
Corrected mismatched vertices and missing edge lines
Existing certification-votes were deleted.
At Sun Nov 17 19:15:01 2019, the following review was posted:
Reviewer: Philo
Certification: novote
Comments:
"Are these parts easy to disassemble or would a builder look for an assembly in the library? "
Assembled clutches are very difficult to disassemble, but halves are provided and inventoried separately by LEGO (like turntables that don't have assembled shortcuts).
Reviewer: Philo
Certification: novote
Comments:
"Are these parts easy to disassemble or would a builder look for an assembly in the library? "
Assembled clutches are very difficult to disassemble, but halves are provided and inventoried separately by LEGO (like turntables that don't have assembled shortcuts).
At Wed Sep 29 07:10:01 2021, the following review was posted:
Reviewer: GeraldLasser
Certification: certify
Comments:
THis suffers also from the vertices not touching the axlehole vertices, maybe this is due to the Axlehole change
Reviewer: GeraldLasser
Certification: certify
Comments:
THis suffers also from the vertices not touching the axlehole vertices, maybe this is due to the Axlehole change
At Thu Oct 7 20:20:01 2021, the following review was posted:
Reviewer: MMR1988
Certification: certify
Comments:
Only one subpart related problem, which can be fixed with an updated subpart.
Reviewer: MMR1988
Certification: certify
Comments:
Only one subpart related problem, which can be fixed with an updated subpart.
3D View