Unofficial File parts/3437pe3.dat
part image
File Header:
0 Duplo Brick  2 x  2 with Eye without White Pattern
0 Name: 3437pe3.dat
0 Author: Takeshi Takahashi [RainbowDolphin]
0 !LDRAW_ORG Unofficial_Part
0 !LICENSE Redistributable under CCAL version 2.0 : see CAreadme.txt

0 BFC CERTIFY CCW

0 !CATEGORY Brick
0 !KEYWORDS Duck, McDonald's, Set 2315, bricklink 3437pb020

Status:
1 subfile isn't certified. (SN)
Size: 3610 bytes
Reviewers' certifications:
MagFors=novote
Required (unofficial) subfiles:
~Duplo Brick 2 x 2 without Front and Back Faces
Status: Needs admin review. (CCN)
Related (unofficial) subfiles:
(none)
File reviews and updates:
At Sun Jun 28 05:45:01 2020, the file was initially submitted.
Submitted by: RainbowDolphin
At Sat Jul 18 17:10:02 2020, the following review was posted:

Reviewer: MagFors
Certification: hold
Comments:
Why p02 ? Maybe this should be pe3, since we already have 2 parts with a similar pattern as pe1 and pe2.

If there's no primitive solution to this pattern, IMHO a higher resolution should be used. If not 48-sided, maybe a 32-sided?

At Sun Jul 19 13:20:01 2020, the following review was posted:

Reviewer: RainbowDolphin
Certification: novote
Comments:
The part number 3437p02 is assigned by the admin.
If 3437pe* is more appropriate, this part should be renumbered.

On the other hand, the part 3664p07 that have the same pattern except part shape and position has been certified.
Are there any guidelines for circle/oval resolution?
(For example, 48-seg is strongly recommended if the radius is >40LDU (2 studs), etc.)
At Sun Jul 19 23:30:01 2020, the following review was posted:

Reviewer: Steffen
Certification: hold
Comments:
yes, should be renumbered to ...pe3, checkout
https://www.ldraw.org/cgi-bin/ptpatterns.cgi?p=3437
to see why

At Mon Jul 20 07:55:01 2020, the following review was posted:

Reviewer: cwdee
Certification: novote
Comments:
My bad advice - will renumber.

At Mon Jul 20 08:00:05 2020 part 'parts/3437p02.dat' was renamed to 'parts/3437pe3.dat'.
At Fri Jul 31 14:55:02 2020, a new version of the file was submitted.
Submitted by: RainbowDolphin
Existing certification-votes were deleted.
At Tue Aug 18 10:55:01 2020, the following review was posted:

Reviewer: MagFors
Certification: novote
Comments:
Could use a similar design as this:
https://www.ldraw.org/cgi-bin/ptdetail.cgi?f=parts/s/3437pe1s01.dat