Unofficial File parts/32533p619.dat
part image
File Header:
0 Technic Disc  5 x  5 Projectile with Bionicle Kanoka 619 Onu-Metru Pattern
0 Name: 32533p619.dat
0 Author: Santeri Piippo [arezey]
0 !LDRAW_ORG Unofficial_Part
0 !LICENSE Redistributable under CCAL version 2.0 : see CAreadme.txt

0 BFC CERTIFY CCW

0 !KEYWORDS Set 8613, Rebrickable 32533pr0619, Bricklink 32533pb619

0 !HISTORY 2021-04-05 [Sirio] Removed unuseful points in number area

Status:
Certified! (ACCN)
Size: 13109 bytes
Reviewers' certifications:
Cheenzo=certify
Holly-Wood=certify
OrionP=certify
Sirio=novote
SwampKryakwa=novote
Required (unofficial) subfiles:
(none)
Related (unofficial) subfiles:
(none)
File reviews and updates:
At Sat Jun 14 22:45:05 2014, the file was initially submitted.
Submitted by: arezey
Comments:
The subfiles were named like that intentionally though they look a bit weird. s\32533p01s02 and s\32533p01s03 are the Kanoka border subfiles, shared between all 6 patterns. s\32533p01s01 is to be the Ta-Metru pattern half.

The pattern itself is a little abstract in the sense that it lacks the number. The disks actually have around 50 different patterns and it would take a lot of work + a TON of subfiles to get them all done. It would pretty much be literal insanity.

There's a system for these patterns and the number code actually dictates a lot of the pattern:
- the first digit indicates which main pattern the part assumes. (in-universe, which Metru the disk was forged in)
- the second digit only has in-universe meaning (which 'power type' it has) and doesn't affect appearance.
- the third digit means 'power level' and dictates how complete the pattern is. Specifically, how many segments (in addition to the bottom base one) the pattern has.

Parts with this pattern thus always use the number 6, this hence why this is p06 and not p01. Since this has the complete border pattern (all 9 segments, making this a Great Disk :P), this part most closely represents the disk 619 (http://peeron.com/inv/parts/32533px619) which, surprise surprise, is the exact disk I modeled this from.

At Sat Jun 14 22:45:05 2014, the following review was posted:

Reviewer: arezey
Certification: novote
Comments:
I'm not sure about the base coloring of this part. It glows in the dark but looks like MilkyWhite when lit.

At Sat Jun 14 23:00:08 2014, the following review was posted:

Reviewer: arezey
Certification: novote
Comments:
And when I said there's about 50 patterns.. it wasn't hyperbole or anything: http://peeron.com/inv/catpic/32533

At Sun Jun 15 09:25:03 2014, the following review was posted:

Reviewer: mikeheide
Certification: novote
Comments:
As fas as I can see you have to just leave some segments from 32533p01s03.dat out and have a new disc.

IMHO you should adjust 32533p01s03.dat to be able to easily add another subpart for the numbers.

At Sun Jun 15 10:50:09 2014, the following review was posted:

Reviewer: arezey
Certification: novote
Comments:
I would also need to split 8 of these segments into individual subfiles and get the number pattern for all of these discs. And I only have 11 of these 51 discs... do we really want all 51 patterns?

At Sun Jun 15 17:15:07 2014, the following review was posted:

Reviewer: mikeheide
Certification: novote
Comments:
Yes, why not :)

At Sun Jun 15 20:00:03 2014, the following review was posted:

Reviewer: arezey
Certification: novote
Comments:
Well, then.
Should we still keep this file as an 'abstract onu-metru kanoka pattern without a specific number'?

At Sun Jun 15 20:55:02 2014, the following review was posted:

Reviewer: mikeheide
Certification: novote
Comments:
I don't think that this is a good idea.
But this has already all in the right place. Just a few cuts and new subparts and this can be the reference file for the other pattern.

At Sun Jun 15 22:35:04 2014, a new version of the file was submitted.
Submitted by: arezey
Comments:
Here we go then..
This should probably be renumbered to 32533p619.dat now.

Existing certification-votes were deleted.
At Mon Jun 16 10:45:04 2014, a new version of the file was submitted.
Submitted by: arezey
Comments:
retitled

At Wed Jun 18 00:30:04 2014, the following review was posted:

Reviewer: arezey
Certification: novote
Comments:
bump? :(

At Wed Jun 18 05:36:06 2014 part 'parts/32533p06.dat' was renamed to 'parts/32533p619.dat'.
At Wed Jul 9 20:25:06 2014, the following review was posted:

Reviewer: MagFors
Certification: certify
No comments were posted with this review.

At Sat Sep 13 18:15:00 2014, the following review was posted:

Reviewer: MMR1988
Certification: novote
Comments:
Datheader shows several colinear vertices. In my eyes this file could use less quads.

At Thu Jan 2 15:25:01 2020, the following review was posted:

Reviewer: UR
Certification: hold
Comments:
Line 85: Colinear vertices found. 3 0 3.96272 -11.9071 -27.375 3.96221 -11.9071 -27.375 4.18556 -12.7342 -30.125
Line 113: Colinear vertices found. 3 0 2.50866 -12.4667 -29.375 2.509 -12.4667 -29.375 3.27506 -11.6912 -26.75
Line 114: Colinear vertices found. 3 0 3.09198 -11.8758 -27.375 2.28969 -12.6882 -30.125 3.09258 -11.8759 -27.375
Line 145: Colinear vertices found. 3 0 2.71381 -11.6802 -26.75 1.88465 -12.3646 -29.077 1.88503 -12.3648 -29.0775
Line 149: Colinear vertices found. 3 0 2.4971 -11.8641 -27.375 2.49686 -11.8641 -27.375 1.59799 -12.614 -29.924
Line 152: Colinear vertices found. 3 0 2.44208 -11.863 -27.375 1.45007 -12.5889 -29.85 2.44242 -11.8631 -27.375

please check with datheader

At Sat Apr 3 14:35:01 2021, a new version of the file was submitted.
Submitted by: Sirio
Comments:
Reworked the area of the number.

Existing certification-votes were deleted.
At Thu Oct 13 09:20:02 2022, the following review was posted:

Reviewer: Holly-Wood
Certification: certify
No comments were posted with this review.

At Fri Oct 14 22:20:01 2022, the following review was posted:

Reviewer: SwampKryakwa
Certification: novote
Comments:
I think the disks could use textures instead of the geometry patterns. The design isn't actually flat, and there are official images of those patterns

At Wed Nov 2 07:35:01 2022, the following review was posted:

Reviewer: Cheenzo
Certification: certify
Comments:
Set 8613 should be added as a keyword. Rebrickable 32533pr0619 and Bricklink 32533pb619 could be added as well.

At Sat Nov 5 15:40:01 2022, the following review was posted:

Reviewer: Sirio
Certification: novote
Comments:
For SwampKryakwa:
since the part had been in approval since 2014, I tried to complete it and make it approveable. If you want to do it with the texture go ahead.


At Sat Nov 5 20:40:02 2022 a Parts Tracker Admin edited the header.
At Sat Nov 5 20:40:02 2022, the following review was posted:

Reviewer: OrionP
Certification: certify
No comments were posted with this review.