Unofficial File parts/32289b.dat
part image
File Header:
0 Electric Technic Motor 4.5V  6 x 17 x  5 Base Type 2
0 Name: 32289b.dat
0 Author: Javier Orquera [kuramapika1]
0 !LDRAW_ORG Unofficial_Part
0 !LICENSE Redistributable under CCAL version 2.0 : see CAreadme.txt

0 BFC CERTIFY CCW

Status:
2 subfiles aren't certified. (CCSSN)
Size: 10193 bytes
Reviewers' certifications:
Holly-Wood=certify
MagFors=certify
Required (unofficial) subfiles:
Related (unofficial) subfiles:
Electric Technic Motor 4.5V 6 x 17 x 5 with Light Grey Base Type 2
Status: 6 subfiles aren't certified. (CCSSSSSSN)
File reviews and updates:
At Thu Feb 27 00:10:01 2020, the file was initially submitted.
Submitted by: kuramapika1
At Fri Feb 28 05:44:06 2020 part 'parts/32289c03.dat' was renamed to 'parts/32289c.dat'.
At Mon Mar 2 18:56:03 2020 part 'parts/32289c.dat' was renamed to 'parts/32289b.dat'.
At Mon Mar 2 19:00:01 2020 a Parts Tracker Admin edited the header.
At Mon Mar 2 19:05:01 2020 a Parts Tracker Admin edited the header.
At Mon Mar 2 22:25:01 2020, the following review was posted:

Reviewer: MagFors
Certification: hold
Comments:
Duplicated surfaces and structure.
Both axles should be removed and added in the assembly instead.
At Wed Mar 4 18:40:01 2020, a new version of the file was submitted.
Submitted by: kuramapika1
Existing certification-votes were deleted.
At Sat Mar 21 14:30:01 2020, the following review was posted:

Reviewer: MagFors
Certification: hold
Comments:
All of the edges and condlines are already added in the subfile.
Unrounded values.
It looks like there is a lot of very strange condlines here, on sharp corners.

At Sat Apr 18 19:10:01 2020, a new version of the file was submitted.
Submitted by: kuramapika1
Existing certification-votes were deleted.
At Tue May 26 21:20:01 2020, a new version of the file was submitted.
Submitted by: kuramapika1
Comments:
A "big" update

At Wed May 27 00:30:01 2020, a new version of the file was submitted.
Submitted by: kuramapika1
Comments:
Corrected file, sorry.

At Wed May 27 00:50:01 2020, a new version of the file was submitted.
Submitted by: kuramapika1
Comments:
Changed the numbers of part 13a and 13b for these ones: part 999999a and part 999999b to avoid conflict with the already submitted. Also corrected part 32289b.
I send a mail to PTAdmin to correct the necesary files. Once again my apolgise.

At Tue Jul 14 04:50:02 2020 a Parts Tracker Admin edited the header.
At Thu Jan 14 02:45:02 2021, a new version of the file was submitted.
Submitted by: kuramapika1
At Fri Mar 12 19:25:01 2021, a new version of the file was submitted.
Submitted by: kuramapika1
At Sat Mar 13 02:50:01 2021, a new version of the file was submitted.
Submitted by: kuramapika1
Comments:
I forgot to add the other parts.

At Wed Mar 24 14:55:01 2021, a new version of the file was submitted.
Submitted by: kuramapika1
At Mon May 10 03:45:01 2021, a new version of the file was submitted.
Submitted by: kuramapika1
At Sun May 23 06:50:01 2021, the following review was posted:

Reviewer: Holly-Wood
Certification: hold
Comments:
* This cannot be 4 LDU deep:

1 16 -32 92 0 0 16 0 0 0 4 13 0 0 2-4cylo.dat

Same problem as with the other cavity.

* Is this really square:

2 24 -4.63 76.6732 22 -4.63 83 22
2 24 -4.63 83 22 0 83 22
2 24 4.63 76.6732 22 4.63 83 22
2 24 4.63 83 22 0 83 22

I'm not an engineer but from a mechanical point of view it mus be round


At Tue May 25 03:15:01 2021, a new version of the file was submitted.
Submitted by: kuramapika1
Existing certification-votes were deleted.
At Tue May 25 03:25:01 2021, the following review was posted:

Reviewer: kuramapika1
Certification: novote
Comments:
Hello: I don't known if the section you marked in red round or not; acording to these https://forums.ldraw.org/thread-24021-post-37295.html#pid37295 (wich I take as basis), in my opinion, it is not. In any case I rounded it (also, don't know if it's correct). Please, guide me in any misstake.

At Thu May 27 15:05:01 2021, the following review was posted:

Reviewer: Holly-Wood
Certification: hold
Comments:
* These prims are already in the subfile:

0 BFC INVERTNEXT
1 1 36 64 -205.125 16 0 0 0 0 -16 0 126.25 0 1-4cyli.dat
0 BFC INVERTNEXT
1 1 36 64 -205.125 -16 0 0 0 0 -16 0 126.25 0 1-8cylo.dat
0 BFC INVERTNEXT
1 1 -36 64 -205.125 16 0 0 0 0 -16 0 126.25 0 1-8cylo.dat
0 BFC INVERTNEXT
1 1 -36 64 -205.125 -16 0 0 0 0 -16 0 126.25 0 1-4cyli.dat

* There is surely better triangulation than this:

3 14 -16 88 -72 -20 88 -72 60 88 -60
4 14 -56 88 -72 -60 88 -60 60 88 -60 -20 88 -72
4 14 40 88 -220 -40 88 -220 -40 88 -216 16 88 -216
3 14 16 88 -216 20 88 -216 40 88 -220
4 14 6.1232 88 -205.125 25.8768 88 -205.125 29.8768 88 -209.125 20 88 -209.125
3 14 20 88 -209.125 16 88 -209.125 6.1232 88 -205.125

* Missing edges and conds:
2 24 -6.1232 51 -216 6.1232 51 -216
2 24 -6.1232 51 -212 -6.1232 51 -216
2 24 6.1232 51 -212 -6.1232 51 -212
2 24 -36 48 -78.875 -29.8768 49.2176 -78.875
2 24 29.8768 49.2176 -78.875 36 48 -78.875
2 24 25.8768 51.89084 -201.125 25.8768 51.89084 -205.125
2 24 6.1232 51 -216 6.1232 51 -212

5 24 -29.8768 49.2176 -82.875 -29.8768 49.2176 -205.125 -25.8768 51.89084 -82.875 -36 48 -205.125
5 24 29.8768 49.2176 -82.875 29.8768 49.2176 -201.125 36 48 -78.875 25.8768 51.89084 -201.125

* The following are best added in the subfile:

2 24 22 76 56 22 76 60
2 24 -22 76 60 -22 76 56

* There is a small between s01 and bs01 which has to be corrected in the subfiles:

2 5 -40 78.5557 31.6849 -40 82 31
2 5 -40 75.6361 33.6361 -40 78.5557 31.69
2 5 -40 75.6361 33.6361 -40 78.5557 31.6849
2 5 -40 78.5557 31.69 -40 82 31

2 3 40 78.5557 31.69 40 82 31
2 3 40 78.5557 31.6849 40 82 31
2 3 40 75.6361 33.6361 40 78.5557 31.69
2 3 40 75.6361 33.6361 40 78.5557 31.6849

At Thu May 27 19:30:01 2021, a new version of the file was submitted.
Submitted by: kuramapika1
Existing certification-votes were deleted.
At Mon May 31 11:55:01 2021, the following review was posted:

Reviewer: Holly-Wood
Certification: hold
Comments:
These two are already (partly) covered by the cylo in the subfile:

1 10 36 64 -205.125 16 0 0 0 0 -16 0 1 0 5-16edge.dat
1 10 -36 64 -205.125 -16 0 0 0 0 -16 0 1 0 3-8edge.dat

but be careful some edges have to be reconstructed.

* Missing complementary conds:

5 14 -36 48 -78.875 -36 48 -205.125 -29.8768 49.2176 -205.125 -42.1232 49.2176 -205.125
5 14 36 48 -78.875 36 48 -205.125 29.8768 49.2176 -205.125 42.1232 49.2176 -205.125

At Thu Jun 10 15:10:02 2021, a new version of the file was submitted.
Submitted by: kuramapika1
Existing certification-votes were deleted.
At Fri Jun 11 11:55:01 2021, the following review was posted:

Reviewer: Holly-Wood
Certification: hold
Comments:
* Already included in the subfile:

3 4 29.8768 49.2176 -78.875 36 48 -78.875 29.8768 49.2176 -82.875
2 4 29.8768 49.2176 -78.875 36 48 -78.875

* Should be united:

2 24 20 65.875 -209.125 20 88 -209.125
2 24 20 65.875 -209.125 20 64 -209.125

At Thu Jun 17 14:00:02 2021, a new version of the file was submitted.
Submitted by: kuramapika1
Existing certification-votes were deleted.
At Fri Jul 2 10:00:01 2021, the following review was posted:

Reviewer: Holly-Wood
Certification: hold
Comments:
From my part this is the last outstanding issue:

2 24 40 88 -220 -40 88 -220

already present in:

1 16 0 82 -220 40 0 0 0 0 6 0 1 0 rect3.dat

At Sat Jul 3 01:50:01 2021, a new version of the file was submitted.
Submitted by: kuramapika1
Existing certification-votes were deleted.
At Sat Jul 3 16:35:01 2021, the following review was posted:

Reviewer: Holly-Wood
Certification: certify
No comments were posted with this review.

At Sun Jul 18 14:55:01 2021, the following review was posted:

Reviewer: MagFors
Certification: hold
Comments:
The small parts added here should be in the assembly part
1 9 0 80.5 39 1 0 0 0 1 0 0 0 -1 u9518.dat
1 9 0 92 47 1 0 0 0 1 0 0 0 1 u9519.dat
1 9 0 80.5 60 1 0 0 0 1 0 0 0 -1 u9510.dat

At Wed Jul 21 14:30:01 2021, a new version of the file was submitted.
Submitted by: kuramapika1
Existing certification-votes were deleted.
At Sat Jul 24 20:40:02 2021, a new version of the file was submitted.
Submitted by: kuramapika1
At Tue Jul 27 03:05:01 2021, the following review was posted:

Reviewer: Holly-Wood
Certification: certify
No comments were posted with this review.

At Tue Jul 27 14:45:01 2021, a new version of the file was submitted.
Submitted by: kuramapika1
Existing certification-votes were deleted.
At Thu Jul 29 00:55:01 2021, the following review was posted:

Reviewer: Holly-Wood
Certification: certify
No comments were posted with this review.

At Thu Sep 30 16:10:01 2021, the following review was posted:

Reviewer: MagFors
Certification: certify
Comments:
Still missing some details.