Unofficial File parts/30643.dat
part image
File Header:
0 Car Base  4 x 10 x  1.333
0 Name: 30643.dat
0 Author: Santeri Piippo [arezey]
0 !LDRAW_ORG Unofficial_Part
0 !LICENSE Redistributable under CCAL version 2.0 : see CAreadme.txt

0 BFC CERTIFY CCW

Status:
1 subfile isn't certified. (SN)
Size: 1263 bytes
Reviewers' certifications:
(no current reviews for this file)
Required (unofficial) subfiles:
Stud Open Group 8 x 1
Status: Certified! (ACCN)
Download: p/stug2-8x1.dat
~Car Base 4 x 10 x 1.333 Quarter
Status: 4 subfiles aren't certified. (SSSSN)
Related (unofficial) subfiles:
(none)
File reviews and updates:
At Thu Mar 13 21:25:05 2014, the file was initially submitted.
Submitted by: arezey
Comments:
Something non-Bionicle for a change. Made this as a stress test of ldforge's vbo renderer which made me realize how fragile it actually was. Will need to tinker with it more.. I wound up making most of the part with the old 0.2.1.

At Thu Mar 13 22:15:02 2014, the following review was posted:

Reviewer: MMR1988
Certification: novote
Comments:
Why not calling the s02 subpart in the s01 subpart. This will save some lines.

At Fri Mar 14 01:05:07 2014, a new version of the file was submitted.
Submitted by: arezey
Comments:
Might as well. Updated.

Existing certification-votes were deleted.
At Fri Mar 14 09:40:04 2014, the following review was posted:

Reviewer: Philo
Certification: novote
Comments:
LDforge (thus you!) make a good job ;)
Shouldn't the chamfered studs be promoted as primitives? I guess they are used in similar parts (30642, 45400 ???) to ease removal of bricks stucked in the cavity.
There is a missing edge line on cavity below center pin hole on all 4 side

At Fri Mar 14 11:30:04 2014, the following review was posted:

Reviewer: arezey
Certification: novote
Comments:
> Shouldn't the chamfered studs be promoted as primitives? I guess they are used in similar parts (30642, 45400 ???)

Doesn't seem to be used in 30642, 45400 I've never seen before in my life but judging from the peeron picture (peeron.com/inv/parts/45400) it doesn't seem to use these studs either.

> to ease removal of bricks stucked in the cavity.

The point of them appears to be so that you can stuff an axle through the part via the pinholes and be able to rotate the said axle. I used this as my starting point in making those studs, I made them by intersecting a 6LDU-cylinder at the stud at the offset where the axle would collide it.

> There is a missing edge line on cavity below center pin hole on all 4 side
Can you get a picture of this? I cannot see it.
At Fri Mar 14 12:40:04 2014, the following review was posted:

Reviewer: Philo
Certification: novote
Comments:
OK for the studs!
Here's the snapshot:http://www.brickshelf.com/gallery/Philo/Misc/30643.png

At Fri Mar 14 13:00:08 2014, the following review was posted:

Reviewer: arezey
Certification: novote
Comments:
Issue fixed in subpart.

At Fri Mar 14 13:10:05 2014, the following review was posted:

Reviewer: arezey
Certification: novote
Comments:
One note: the underside 1x4 "bricks" have hollow understuds like modern day plates do. I wasn't sure how to deal with these, we don't have anything for hollow understuds so I just used solid ones.

And thank you Philo for your compliment. :)

At Fri Mar 14 15:25:04 2014, a new version of the file was submitted.
Submitted by: arezey
Comments:
Adjusted title.

Existing certification-votes were deleted.
At Fri Mar 14 15:40:04 2014, a new version of the file was submitted.
Submitted by: arezey
Comments:
Moved pins to subfile.

At Fri Mar 14 17:30:04 2014, the following review was posted:

Reviewer: mikeheide
Certification: novote
Comments:
"I wasn't sure how to deal with these, we don't have anything for hollow understuds so I just used solid ones."
Good choice. We decided some years ago that we would not model the hollow underside studs as hollow studs.

At Sat Mar 15 06:30:03 2014 a Parts Tracker Admin edited the header.
At Sun Apr 6 15:50:07 2014, the following review was posted:

Reviewer: MagFors
Certification: novote
Comments:
Do you know of the stud4h-primitive?
It could be used here instead of the inverted cyli and a stud4a-prim

At Sun May 6 12:25:01 2018, a new version of the file was submitted.
Submitted by: MagFors
Comments:
Adapted to updated subfile.

Existing certification-votes were deleted.
At Sun May 6 16:20:01 2018, a new version of the file was submitted.
Submitted by: MagFors
Comments:
Updated description