Unofficial File parts/2860b.dat
part image
File Header:
0 ~Train Track 6 Studs Wide Switch Blade Right
0 Name: 2860b.dat
0 Author: Jens Brühl [jb70]
0 !LDRAW_ORG Unofficial_Part
0 !LICENSE Redistributable under CCAL version 2.0 : see CAreadme.txt

0 BFC CERTIFY CCW

0 !HISTORY 2012-09-10 [KROACH] Added missing lines in bottom channel
0 !HISTORY 2016-03-26 [MMR1988] Added missing condlines due to primitive change
0 !HISTORY 2020-12-17 [jb70] New part 2860b.dat for plastic train tracks based on the previous 9V-part 2860.dat from [KROACH]  
0 !HISTORY 2020-12-17 [jb70] Redesigned rail to be solid plastic which is different to the 9V part

0 // Curved Track as reference for the rail geometry
0 // 1 16 6.073 8 -52.372 .98079 0 .19509 0 1 0 -.19509 0 .98079 53400.dat

Status:
Needs more votes. (N)
Size: 18352 bytes
Reviewers' certifications:
(no current reviews for this file)
Required (unofficial) subfiles:
Cone 24 x 0.375
Status: Certified! (ACCN)
Download: p/3-8con24.dat
Cone 5 x 0.375
Status: Certified! (ACCN)
Download: p/3-8con5.dat
Related (unofficial) subfiles:
~Train Track 6 Studs Wide Switch Blade Left
Status: 1 subfile isn't certified. (SN)
Download: parts/2862b.dat
Train Track 6 Studs Wide Switch Point Right (Straight)
Status: 3 subfiles aren't certified. (SSSN)
Train Track 6 Studs Wide Switch Point Right (Branching)
Status: 3 subfiles aren't certified. (SSSN)
File reviews and updates:
At Thu Dec 17 16:40:02 2020, the file was initially submitted.
Submitted by: jb70
Comments:
I think, 2860 and 2862 will be the right real part numbers for the solid parts for the new plastic train tracks, since this number is moulded in the real parts.

The Train Track 9V Point Tongue Right for sure has a different design, very close to the existing version of 2860.dat on the parts tracker from [KROACH] with the gap underneath the metal rail. See Photo on bricklink: https://img.bricklink.com/ItemImage/EXTN/18897.png

Chris Dee wrote me, that Design IDs 2860 and 2862 will be the correct numbers for the 9V track as well.

And he wrote me, that , since I am sure that the all-plastic tracks also uses 2860 and 2862, then maybe the mould was updated to remove the recess. In that case the LDraw convention would be to use 2860a for the version with a recess that accepts the metal and 2860b for the all-plastic version.

So these are the new part submits for the b-parts.