Unofficial File parts/2846.dat
part image
File Header:
0 Electric  9V Battery Box  4 x 14 x  4 Cover
0 Name: 2846.dat
0 Author: Marc Klein [marckl]
0 !LDRAW_ORG Unofficial_Part
0 !LICENSE Redistributable under CCAL version 2.0 : see CAreadme.txt

0 BFC CERTIFY CCW

0 !HISTORY 2000-09-30 [PTadmin] Official Update 2000-02
0 !HISTORY 2007-05-20 [PTadmin] Header formatted for Contributor Agreement
0 !HISTORY 2008-07-01 [PTadmin] Official Update 2008-01
0 !HISTORY 2017-08-06 [MagFors] Modified with WINDZ for BFC compliance
0 !HISTORY 2017-08-06 [MagFors] used primitives
0 !HISTORY 2019-09-03 [cwdee] Added bevels around buttons; improved latch

0 // Sides
Status:
Needs admin review. (CCF)
Size: 14149 bytes
Reviewers' certifications:
Holly-Wood=certify
Steffen=certify
Required (unofficial) subfiles:
(none)
Related (unofficial) subfiles:
Electric 9V Battery Box 4 x 14 x 4 with Dark Grey Bottom
Status: 2 subfiles aren't certified. (CSSN)
Electric 9V Battery Box 4 x 14 x 4 with Yellow Bottom
Status: 2 subfiles aren't certified. (CSSN)
Electric 9V Battery Box 4 x 14 x 4 with Dark Bluish Grey Bottom
Status: 2 subfiles aren't certified. (CSSN)
File reviews and updates:
At Wed Aug 9 07:40:01 2017, the file was initially submitted.
Submitted by: MagFors
At Mon Jan 8 20:45:00 2018, the following review was posted:

Reviewer: Steffen
Certification: certify
Comments:
origin is off, but cannot be changed

At Tue Jan 30 09:15:01 2018, the following review was posted:

Reviewer: Philo
Certification: certify
No comments were posted with this review.

At Wed Feb 7 22:00:01 2018, a new version of the file was submitted.
Submitted by: MagFors
Comments:
Had to correct the stud orientation.

Existing certification-votes were deleted.
At Wed Mar 21 07:35:01 2018, the following review was posted:

Reviewer: Steffen
Certification: certify
No comments were posted with this review.

At Thu Mar 29 20:30:01 2018, the following review was posted:

Reviewer: MMR1988
Certification: certify
Comments:
Maybe another whitespace should be added in front of 9V.

At Sat Aug 31 15:35:01 2019, the following review was posted:

Reviewer: cwdee
Certification: hold
Comments:
I am working on improving this.

At Tue Sep 3 19:30:01 2019, a new version of the file was submitted.
Submitted by: cwdee
Existing certification-votes were deleted.
At Sat Sep 7 13:45:01 2019, the following review was posted:

Reviewer: MagFors
Certification: hold
Comments:
Line 24: Incorrect use of command for comment lines. 0 / 2 x 2 hole
Line 215: Identical vertices found. 5 24 12 -45 10 12 -45 8 11 -32 10 12 -45 10
Line 220: Identical vertices found. 5 24 -12 -45 10 -12 -45 8 -11 -32 10 -12 -45 10
Line 274: Incorrect use of command for comment lines. 0 //

Are you also working on the red buttons, 2849. It needs to be adaptad to these rounded bevels

At Sat Sep 7 19:55:01 2019, the following review was posted:

Reviewer: cwdee
Certification: novote
Comments:
Yes, I am planning to re-work the buttons (2849) before this is released.

At Sat Sep 7 20:10:01 2019, a new version of the file was submitted.
Submitted by: cwdee
Comments:
Fixed problems reported by MagFors

Existing certification-votes were deleted.
At Sun Sep 15 09:50:01 2019, the following review was posted:

Reviewer: MagFors
Certification: certify
Comments:
Line 260: Quad points not coplaner (angle = 2.21831133461171): 4 16 -12 -45 8 -12 -46 10 -11 -32 10 -11 -32 8
Line 265: Quad points not coplaner (angle = 2.21831133461171): 4 16 11 -32 8 11 -32 10 12 -46 10 12 -45 8
At Sat Sep 28 20:30:01 2019, the following review was posted:

Reviewer: MMR1988
Certification: hold
Comments:
Misses two edges:
2 24 -12 -47 0 12 -47 0
2 24 12 -46 10 -12 -46 10

The area, where this edge:
2 24 -12 -45 10 12 -45 10
should be, is sloped at the real part.

This reinforcement is slightly misplaced (should be centered):
1 16 0 -45 0 0 2 0 6 0 0 0 0 -6 tri3u1.dat
At Sun Oct 13 09:40:01 2019, a new version of the file was submitted.
Submitted by: cwdee
Comments:
Added missing lines, correct non-planar quads, centred re-inforcement. I think the slope at 2 24 -12 -45 10 12 -45 10 is too subtle to need modelling.

Existing certification-votes were deleted.
At Sun Oct 13 22:25:01 2019, the following review was posted:

Reviewer: Steffen
Certification: certify
Comments:
origin is off, but file already was official

At Wed Oct 16 19:45:01 2019, the following review was posted:

Reviewer: Holly-Wood
Certification: certify
Comments:

Line 319: hairline polygon (smallest angle 0.09) - WARNING
3 16 -40 -45 140 -38 -47 78 -38 -47 80
Line 332: hairline polygon (smallest angle 0.09) - WARNING
3 16 40 -45 140 38 -47 80 38 -47 78