Unofficial File parts/2723p01.dat
part image
File Header:
0 Technic Disc  3 x  3 with Axlehole and Metallic Silver Disc Brake Pattern
0 Name: 2723p01.dat
0 Author: Ulrich Röder [UR]
0 !LDRAW_ORG Unofficial_Part
0 !LICENSE Redistributable under CCAL version 2.0 : see CAreadme.txt

0 BFC CERTIFY CCW

0 !KEYWORDS Set 21307, Cuusoo, Ideas, Caterham, Car
0 !CMDLINE -c0

Status:
2 subfiles aren't certified. (CSSX)
Size: 2131 bytes
Reviewers' certifications:
MagFors=certify
Required (unofficial) subfiles:
Related (unofficial) subfiles:
(none)
File reviews and updates:
At Thu Apr 4 18:05:02 2019, the file was initially submitted.
Submitted by: UR
At Thu Apr 4 18:25:01 2019, the following review was posted:

Reviewer: MMR1988
Certification: novote
Comments:
I would like to see the original 2723 subfiled (in low res) for pattern useage and then used here.

At Fri Apr 5 11:10:02 2019, a new version of the file was submitted.
Submitted by: UR
Existing certification-votes were deleted.
At Tue Apr 9 19:15:01 2019, the following review was posted:

Reviewer: MagFors
Certification: novote
Comments:

Maybe something like this?
0 // 1 16 0 3 0 3.5 0 0 0 1 0 0 0 3.5 4-4ring2.dat
0 // 1 16 0 3 0 5 0 0 0 1 0 0 0 5 4-4ring2.dat
1 11 0 3 0 7 0 0 0 1 0 0 0 7 4-4ring1.dat
1 12 0 3 0 1 0 0 0 1 0 0 0 1 4-4rin14.dat
1 13 0 3 0 15 0 0 0 1 0 0 0 15 48\4-4aring.dat

0 // 1 16 0 3 0 1 0 0 0 1 0 0 0 1 4-4rin29.dat
3 13 29 3 0 30 3 0 28.7526 3 3.7851
3 13 26.7933 3 11.0979 28.0109 3 7.5059 27.717 3 11.481
4 13 27.717 3 11.481 28.0109 3 7.5059 28.7526 3 3.7851 30 3 0
1 12 0 3 0 30 0 0 0 1 0 0 0 30 4-4ering.dat

At Wed Apr 10 14:30:01 2019, the following review was posted:

Reviewer: UR
Certification: novote
Comments:
Yes...Magnus...I like your solution for the Center ...had this also on my mind....even for the subpart...finally I was unsure to change something , what is already certified in the unpatterned part.

The Idea was like so:

for the subpart 2723s01:

1 11 0 7 0 7 0 0 0 1 0 0 0 7 4-4ring1.dat
1 12 0 7 0 1 0 0 0 1 0 0 0 1 4-4rin14.dat
1 13 0 7 0 15 0 0 0 1 0 0 0 15 48\4-4aring.dat
1 16 0 7 0 15 0 0 0 -1 0 0 0 15 48\4-4ring1.dat
1 16 0 7 0 -30 0 0 0 -4 0 0 0 30 48\4-4cylo.dat
1 16 0 0 0 1 0 0 0 1 0 0 0 1 axlehol2.dat
1 16 0 10 0 1 0 0 0 1 0 0 0 1 axlehol2.dat
1 16 0 0 0 1 0 0 0 10 0 0 0 1 axlehole.dat
1 16 0 3 0 -7 0 0 0 -3 0 0 0 7 4-4cylo.dat
1 16 0 10 0 -7 0 0 0 -3 0 0 0 7 4-4cylo.dat
1 16 0 0 0 1 0 0 0 1 0 0 0 1 4-4ring6.dat
1 16 0 10 0 1 0 0 0 -1 0 0 0 1 4-4ring6.dat

for the main file

1 16 0 0 0 1 0 0 0 1 0 0 0 1 s\x_2723s01.dat
1 16 0 3 0 1 0 0 0 1 0 0 0 1 48\4-4rin29.dat
1 11 0 3 0 7 0 0 0 1 0 0 0 7 4-4ring1.dat
1 12 0 3 0 1 0 0 0 1 0 0 0 1 4-4rin14.dat
1 13 0 3 0 15 0 0 0 1 0 0 0 15 48\4-4aring.dat

0 // Disc
1 16 0 0 0 1 0 0 0 1 0 0 0 1 s\2723p01s01.dat

what do you think?

At Wed Apr 10 15:20:01 2019, the following review was posted:

Reviewer: MagFors
Certification: novote
Comments:

Hm..
I don't see a need for going hi-res at all.
And if you do, you should place the 4-4aring at the biggest diameter.

Any recycled part need to be recertified. And that's also a good opportunity to improve the design.
I would even say that you should do that. In this case, the overlapping primitives must be removed, to become certified.

At Thu Apr 11 15:55:02 2019, a new version of the file was submitted.
Submitted by: UR
Existing certification-votes were deleted.
At Thu Apr 11 17:35:02 2019, the following review was posted:

Reviewer: MagFors
Certification: certify
No comments were posted with this review.

At Thu Apr 25 19:25:02 2019, a new version of the file was submitted.
Submitted by: UR
Comments:
corrected and added keyword as suggested by Philippe...

Thanks for your note

Existing certification-votes were deleted.
At Mon Apr 29 19:55:02 2019, the following review was posted:

Reviewer: MagFors
Certification: certify
No comments were posted with this review.