Unofficial File parts/20398c01.dat
part image
File Header:
0 Minifig Cup Take Out with Dome Lid
0 Name: 20398c01.dat
0 Author: Gerald Lasser [GeraldLasser]
0 !LDRAW_ORG Unofficial_Part
0 !LICENSE Redistributable under CCAL version 2.0 : see CAreadme.txt

0 BFC CERTIFY CCW

0 !CATEGORY Minifig Accessory

0 !HISTORY 2016-03-18 {LEGO Digital Designer} Original part shape
0 !HISTORY 2016-03-18 [GeraldLasser] File preparation for LDraw Parts Tracker

Status:
1 'hold' vote. (HSSN)
Size: 539 bytes
Reviewers' certifications:
GeraldLasser=novote
MagFors=novote
Philo=hold
Steffen=novote
Required (unofficial) subfiles:
~Minifig Cup Take Out Dome Lid
Status: 1 subfile isn't certified. (CSN)
Related (unofficial) subfiles:
(none)
File reviews and updates:
At Tue Oct 24 05:45:00 2017, the file was initially submitted.
Submitted by: GeraldLasser
At Tue Oct 24 08:50:00 2017, a new version of the file was submitted.
Submitted by: GeraldLasser
Comments:
corrected description

At Tue Oct 24 10:10:01 2017, a new version of the file was submitted.
Submitted by: GeraldLasser
At Mon Nov 13 21:50:01 2017, the following review was posted:

Reviewer: MagFors
Certification: hold
Comments:
Please remove the initial tilde, ~

At Tue Nov 14 10:00:00 2017, a new version of the file was submitted.
Submitted by: GeraldLasser
Existing certification-votes were deleted.
At Tue Nov 14 10:35:00 2017, the following review was posted:

Reviewer: Philo
Certification: hold
Comments:
I got two problems with this part... First, where does 20398 comes from? This reference doesn't appear on Brickset. Perhaps it is the ref. of the undecorated white assembly?
Then, LDD lists this part as 20179 "KITCHEN EQUIPMENT NO.1,BOTTOM". Since LEGO calls 20179 "bottom" means that this is actually an assembly of two parts, not some overmolding.
So I think we should
- make a 20179 part from your 20398s01 + front face
- Make top (20398s01) a uxxx part
- make 20398c01 a shortcut (20179 + trans clear uxxx) named 20179c01
At Tue Nov 14 15:00:01 2017, the following review was posted:

Reviewer: GeraldLasser
Certification: novote
Comments:
20398 come from BL
20179 from LDD
and in the LEGO replacement shop 20495 for the Simpsons Version...

At Tue Nov 14 17:35:00 2017, the following review was posted:

Reviewer: MagFors
Certification: novote
Comments:
20398 is the designID at LEGO Replacement parts (and Brickset) for a white cup with trans lid.
ElementID = 6189348

20495 is the designID at Brickset for a lime green cup (with print "SQUISHEE")
ElementID = 6106422
21791 is the DesignID at Brickset for a dark purple cup (with the same print)
ElementID = 6120760

No known number for the pink cup

At Tue Nov 14 18:15:00 2017, the following review was posted:

Reviewer: Philo
Certification: hold
Comments:
Indeed, 20398 is listed at LEGO Replacement parts, but I couldn't find it (neither 6189348 item) on Brickset. Why???
This doesn't change much my suggestion above, except to add 20398 as alias of 20179c01

At Tue Nov 14 21:30:00 2017, the following review was posted:

Reviewer: MagFors
Certification: novote
Comments:
Yes, you're right. 20398 is not at Brickset. My bad.

At Wed Nov 15 07:50:00 2017, the following review was posted:

Reviewer: Philo
Certification: hold
Comments:
I think I know why: Brickset imports parts through sets inventories, but 20398 belongs to a collectible minifig that has no inventory at LEGO replacement parts.

At Wed Nov 15 16:15:00 2017, the following review was posted:

Reviewer: MagFors
Certification: novote
Comments:
If so, then it's the same reason for no number on the pink cup.
It's only present in CMF Ninjago Movie, 71019-11

At Wed Nov 22 22:40:00 2017, the following review was posted:

Reviewer: GeraldLasser
Certification: novote
Comments:
SO how should we go ahead with the numbering?

At Tue Dec 5 18:25:00 2017, the following review was posted:

Reviewer: MagFors
Certification: novote
Comments:
IMO, follow the suggestions from Philo.

At Wed Dec 6 23:15:00 2017, the following review was posted:

Reviewer: GeraldLasser
Certification: novote
Comments:
This part has some really crazy numbering, there are a total of four versions of the part (I've got three of them):

- ALL of them have the Mould imprint 20398

- In LDD the number is 20179

- PLAIN WHITE: (LEGO: KITCHEN EQUIPMENT NO. 1)
BL: 20398c01
Element ID: 6189348 (BL/LEGO)
BS: not available
LEGO Design ID: 20398

- LIME w. SQUISHEEE: (BS: Kitchen Equipment No. 1 "No.1")
BL: 20398c01pb01
Element ID: 6106422
BS: 20495
LEGO Design ID: not in the spares shop anymore

- DARK PURPLE w. SQUISHEEE: (BS: Kitchen Equipment No. 1 "No.2")
BL: 20398c01pb01
Element ID: 6120760
BS: 21791
LEGO Design ID: not in the spares shop anymore

- BRIGHT PINK w. BUBBLES: (LEGO: KITCHEN EQUIPMENT, NO. 6)
BL: 20398c01pb02
Element ID: 6197231
BS: not available
LEGO Design ID: 34707


Reading through this I would prefer the mould number:
- make the bottom (now 20398s01) with the front to 20398 (opposed to Philo's 20179)
- make the top lid (now 20398s02) to a uxxxx
- add the shortcut 20398c01 for the complete assembly (dual injection...?)
- add the squishee as 20398c01p??1
- add the pink patterned as 20398c01p??2

other thoughts?
At Sat Dec 16 10:50:00 2017, the following review was posted:

Reviewer: GeraldLasser
Certification: novote
Comments:
Any thoughts on my suggestion for the numbering? Tehe common thing between all of them is the mold number...

At Fri Dec 29 18:15:01 2017 a Parts Tracker Admin edited the header.
At Fri Jan 12 04:30:01 2018, the following review was posted:

Reviewer: Steffen
Certification: novote
Comments:
should the lid and the cup become separate "~ part" files?
This file currently has filename ...c01,
but says type "part" (instead of "shortcut") in the header.

At Sat Dec 1 23:40:01 2018, the following review was posted:

Reviewer: GeraldLasser
Certification: novote
Comments:
Push this up again, how shall we go on with the numbering of this and its printed cousins?