Unofficial File parts/197915b.dat
File Header:
0 Sticker 0.9 x 1.9 with Black "NO SMOKING" and Border
0 Name: 197915b.dat
0 Author: N. W. Perry [Plastikean]
0 !LDRAW_ORG Unofficial_Part
0 !LICENSE Redistributable under CCAL version 2.0 : see CAreadme.txt
0 BFC CERTIFY CCW
0 !KEYWORDS set 5540, Bricklink 5540stk01
Status:

Size: 19777 bytes
Reviewers' certifications:
Holly-Wood=certify MagFors=hold cwdee=certify
Required (unofficial) subfiles:
(none)
Related (unofficial) subfiles:
(none)
File reviews and updates:
At Sun Sep 20 16:00:02 2020, the following review was posted:
Reviewer: MagFors
Certification: certify
No comments were posted with this review.
Reviewer: MagFors
Certification: certify
No comments were posted with this review.
At Mon Sep 21 15:05:01 2020, the following review was posted:
Reviewer: UR
Certification: novote
Comments:
Keywords, Bricklink Stickersheet number
Reviewer: UR
Certification: novote
Comments:
Keywords, Bricklink Stickersheet number
At Tue Sep 22 04:40:02 2020, the following review was posted:
Reviewer: Holly-Wood
Certification: hold
Comments:
* These:
2 1 8.774 -.25 -.529 8.792 -.25 -3.176
2 1 13.571 -.25 -4.572 13.553 -.25 -4.897
2 1 -9.22 -.25 -2.424 -9.202 -.25 -4.897
2 1 7.035 -.25 -2.322 7.023 -.25 -4.897
2 1 -1.39 -.25 4.897 -1.402 -.25 2.292
2 1 -3.099 -.25 3.074 -3.111 -.25 .529
should be parallel.
* You have put so much detail into the letters but just 2 faces for the rounded corner of the border: 2 2 -17.278 -.25 8.073 -18.072 -.25 7.279
How about a combination of 1-4chrd/1-4ndis?
* This is poor design. Try to avoid long stretched triangles by splitting 2 14 16.952 -.25 -6.989 -17.018 -.25 -6.989 even 4 times (LDPE's Actions -> Split N-Times is your friend)
* The border has a rounding problem. Check the x and z values of:
2 6 -17.017 -.25 7.015 16.952 -.25 7.019
2 6 16.952 -.25 7.019 16.952 -.25 -6.989
Reviewer: Holly-Wood
Certification: hold
Comments:
* These:
2 1 8.774 -.25 -.529 8.792 -.25 -3.176
2 1 13.571 -.25 -4.572 13.553 -.25 -4.897
2 1 -9.22 -.25 -2.424 -9.202 -.25 -4.897
2 1 7.035 -.25 -2.322 7.023 -.25 -4.897
2 1 -1.39 -.25 4.897 -1.402 -.25 2.292
2 1 -3.099 -.25 3.074 -3.111 -.25 .529
should be parallel.
* You have put so much detail into the letters but just 2 faces for the rounded corner of the border: 2 2 -17.278 -.25 8.073 -18.072 -.25 7.279
How about a combination of 1-4chrd/1-4ndis?
* This is poor design. Try to avoid long stretched triangles by splitting 2 14 16.952 -.25 -6.989 -17.018 -.25 -6.989 even 4 times (LDPE's Actions -> Split N-Times is your friend)
* The border has a rounding problem. Check the x and z values of:
2 6 -17.017 -.25 7.015 16.952 -.25 7.019
2 6 16.952 -.25 7.019 16.952 -.25 -6.989
At Tue Sep 22 05:00:01 2020, the following review was posted:
Reviewer: Holly-Wood
Certification: hold
Comments:
By poor design I had these in eye:
3 4 -2.44 -.25 -5 2.714 -.25 -4.897 .993 -.25 -4.897
3 4 -.331 -.25 4.897 1.671 -.25 4.899 2.374 -.25 4.992
3 4 -1.39 -.25 4.897 -.331 -.25 4.897 2.374 -.25 4.992
3 4 -17.018 -.25 -6.989 -2.44 -.25 -5 -3.12 -.25 -5
3 4 -.066 -.25 -4.897 -2.44 -.25 -5 .993 -.25 -4.897
Reviewer: Holly-Wood
Certification: hold
Comments:
By poor design I had these in eye:
3 4 -2.44 -.25 -5 2.714 -.25 -4.897 .993 -.25 -4.897
3 4 -.331 -.25 4.897 1.671 -.25 4.899 2.374 -.25 4.992
3 4 -1.39 -.25 4.897 -.331 -.25 4.897 2.374 -.25 4.992
3 4 -17.018 -.25 -6.989 -2.44 -.25 -5 -3.12 -.25 -5
3 4 -.066 -.25 -4.897 -2.44 -.25 -5 .993 -.25 -4.897
At Sun May 16 05:00:01 2021, a new version of the file was submitted.
Submitted by: Plastikean
Comments:
The pattern is totally rebuilt with all the recommended fixes. (The poor design was really just lack of design. I was in a hurry and basically just left the raw img4dat output!)
Existing certification-votes were deleted.
Submitted by: Plastikean
Comments:
The pattern is totally rebuilt with all the recommended fixes. (The poor design was really just lack of design. I was in a hurry and basically just left the raw img4dat output!)
Existing certification-votes were deleted.
At Sun May 16 07:15:02 2021, the following review was posted:
Reviewer: MagFors
Certification: certify
No comments were posted with this review.
Reviewer: MagFors
Certification: certify
No comments were posted with this review.
At Mon May 17 11:45:02 2021, the following review was posted:
Reviewer: Holly-Wood
Certification: certify
No comments were posted with this review.
Reviewer: Holly-Wood
Certification: certify
No comments were posted with this review.
At Tue Jul 6 08:30:01 2021, the following review was posted:
Reviewer: cwdee
Certification: certify
No comments were posted with this review.
Reviewer: cwdee
Certification: certify
No comments were posted with this review.
At Mon Nov 1 21:20:01 2021, the following review was posted:
Reviewer: MagFors
Certification: hold
Comments:
This should now use the subfile.
Reviewer: MagFors
Certification: hold
Comments:
This should now use the subfile.
3D View