Unofficial File parts/194325a.dat
part image
File Header:
0 Sticker  2.6 x 10 with White/Red/Blue Stripes
0 Name: 194325a.dat
0 Author: Steffen [Steffen]
0 !LDRAW_ORG Unofficial_Part
0 !LICENSE Redistributable under CCAL version 2.0 : see CAreadme.txt

0 BFC CERTIFY CW
0 !KEYWORDS awning, Slope 33  3 x 10

0 !HISTORY 2014-02-06 [MagFors] Adapted subfiles to new standard

Status:
2 subfiles aren't certified. (SSX)
Size: 421 bytes
Reviewers' certifications:
(no current reviews for this file)
Required (unofficial) subfiles:
Related (unofficial) subfiles:
(none)
File reviews and updates:
At Fri Jul 4 03:00:01 2003, the file was initially submitted.
Submitted by: Steffen
Comments:
From set 6372, to be placed onto some Slope Bricks 33.
Set 6372 contains more stickers, so this one gets suffix "a".

At Fri Jul 4 03:00:01 2003, a new version of the file was submitted.
Submitted by: Steffen
At Tue Jul 29 22:00:03 2003, the following review was posted:

Reviewer: OrionP
Certification: hold
Comments:
Filename does not conform to current standards

At Fri Aug 1 15:00:05 2003, a new version of the file was submitted.
Submitted by: Steffen
Comments:
removed file comments

Existing certification-votes were deleted.
At Fri Aug 1 15:00:05 2003, the following review was posted:

Reviewer: Steffen
Certification: hold
Comments:
restoring hold vote: file rename is pending

At Sun Oct 26 12:56:01 2003, the following review was posted:

Reviewer: Steffen
Certification: novote
Comments:
downgrading HOLD to NOVOTE: admin can rename file upon release

At Sun Oct 26 13:42:01 2003, the following review was posted:

Reviewer: OrionP
Certification: novote
Comments:
File name doesn't conform to current standards. I think that an unfolded version of this sticker should also be made.

At Sun Oct 26 16:10:02 2003, the following review was posted:

Reviewer: cwdee
Certification: hold
Comments:
IRL this sticker has a scalloped (wavy) edge, see http://library.brickshelf.com/scans/6000/6372/6372-06.html, but I think the sticker was scored to bend around the edge of the slope, and the wavy part is often missing.

At Sun Oct 26 21:30:02 2003, the following review was posted:

Reviewer: Steffen
Certification: hold
Comments:
you are right, the bottom hemicircles are missing

At Sat Nov 22 17:25:06 2003 part 'parts/s_6372a.dat' was renamed to 'parts/s3.dat'.
At Tue Jan 13 00:50:11 2004, the following review was posted:

Reviewer: OrionP
Certification: novote
Comments:
Contains embedded POV code which, in my opinion, is not appropriate for files in the Official Library.
At Wed Jan 28 20:28:04 2004, a new version of the file was submitted.
Submitted by: cwdee
Comments:
Removing POV code per LSC decision

Existing certification-votes were deleted.
At Fri Feb 20 02:04:03 2004, the following review was posted:

Reviewer: fwcain
Certification: certify
No comments were posted with this review.

At Sun Apr 4 11:48:01 2004, the following review was posted:

Reviewer: Steffen
Certification: hold
Comments:
holding for missing bottom hemicircles :-(
volunteers welcome ...

At Sun Apr 4 14:54:03 2004, the following review was posted:

Reviewer: OrionP
Certification: hold
Comments:
I think this should be split into 2 files along the crease and then a c01 be submitted for the most commen orientation. Hold vote for the scalloping.

At Mon Jan 26 23:18:03 2009, the following review was posted:

Reviewer: mikeheide
Certification: novote
Comments:
May this http://www.peeron.com/inv/sets/200-2 can help to find the right curvature for the overhang. On http://www.hccamsterdam.nl/brickfactory/stikkers/index.htm in a sticker for that!

At Tue Jan 27 20:48:01 2009, the following review was posted:

Reviewer: Steffen
Certification: hold
Comments:
No, that two URLs are pointing to a *different* sticker.

***This*** part is the sticker of set
http://www.peeron.com/inv/sets/6372-1
At Tue Jan 27 21:58:31 2009, the following review was posted:

Reviewer: mikeheide
Certification: novote
Comments:
Sorry, my fault. Here it is http://www.bricklink.com/catalogItemPic.asp?P=6372stk01

At Tue Jan 27 22:36:01 2009, the following review was posted:

Reviewer: Steffen
Certification: hold
Comments:
yes, that sticker image is the correct one.
The image is by far better than any image that I could
take from my one
At Sat Mar 14 19:58:18 2009, the following review was posted:

Reviewer: anathema
Certification: hold
Comments:
This appears to be a single plane, rather than a box?

Rather oddly, if rendered in LDView with BFC turned on, all you can see is the outline of the sticker - the pattern is not visible until you disable BFC :-)
At Sun Jun 7 19:58:01 2009, the following review was posted:

Reviewer: mikeheide
Certification: novote
Comments:
Will this be updated soon? Intersector will work perfectly here.

At Sun Jun 7 22:44:02 2009, the following review was posted:

Reviewer: Steffen
Certification: hold
Comments:
I'll see to get this baby fixed, thanks for reminding.
Indeed, intersector is the choice here.
I think I'll split this one into two files to make
it easier applicable onto a 33 slope

At Thu Jun 11 22:44:04 2009, a new version of the file was submitted.
Submitted by: Steffen
Comments:
complete re-creation of part using philo's intersector.exe tool

Existing certification-votes were deleted.
At Thu Jun 11 22:56:07 2009, a new version of the file was submitted.
Submitted by: Steffen
Comments:
removed "white" from part name
as color 16 is used for versatility

At Fri Jun 12 08:12:03 2009, a new version of the file was submitted.
Submitted by: Steffen
Comments:
(just for completeness: according to that document,
some stickers are allowed to use color 16),
however, this one is not transparent

--> replaced color 16 by white

At Fri Jun 12 14:52:00 2009, the following review was posted:

Reviewer: mikeheide
Certification: novote
Comments:
White should also be mentioned in the part description.

At Fri Jun 12 19:40:05 2009, a new version of the file was submitted.
Submitted by: Steffen
Comments:
Added "white" to part name.
Note that part name intentionally starts with "~"
to not get this part into the normal part list, but instead
its brother s3c01.dat which is ready-to-use.
This part only exists to also have a flat version of this sticker.

Existing certification-votes were deleted.
At Fri Jun 12 20:34:03 2009, the following review was posted:

Reviewer: mikeheide
Certification: certify
No comments were posted with this review.

At Sat Jun 13 13:44:21 2009 part 'parts/s3.dat' was renamed to 'parts/194325a.dat'.
At Mon Jul 4 01:25:04 2011, the following review was posted:

Reviewer: Steffen
Certification: novote
Comments:
Admin, could you please add keyword "Awning"?

At Mon Jul 4 02:00:07 2011, a new version of the file was submitted.
Submitted by: Steffen
Comments:
added keyword awning, removed history (let's start this part's life when it first gets official)

Existing certification-votes were deleted.
At Sat Jan 4 17:45:04 2014, the following review was posted:

Reviewer: mikeheide
Certification: certify
No comments were posted with this review.

At Mon Feb 3 21:50:03 2014, the following review was posted:

Reviewer: MagFors
Certification: hold
Comments:
Please read the sticker specification. If I read it correct, this pattern is done incorrect.

The bottom must be colour 16.
The pattern must be hardcoded in all its different colours. On this sticker red/white/blue.

Since the backside must be colour 16, colouring of the subfiles can't be allowed,
if the backside is placed in the subfile.
At Thu Feb 6 23:15:03 2014, a new version of the file was submitted.
Submitted by: MagFors
Existing certification-votes were deleted.
At Fri Feb 7 07:35:05 2014, the following review was posted:

Reviewer: MMR1988
Certification: novote
Comments:
What's about the description? It should be changed to our 'A x B blabla' System. ;-)
And I don't see any reason for the tilde in front of the description.

At Fri Feb 7 21:10:05 2014, a new version of the file was submitted.
Submitted by: MagFors
Comments:
Changed the description.

Existing certification-votes were deleted.
At Fri Feb 7 21:20:03 2014, a new version of the file was submitted.
Submitted by: MagFors