Unofficial File parts/18909.dat
part image
File Header:
0 Panel Cone  3 x  6 x  6 Elliptic Parabolic
0 Name: 18909.dat
0 Author: Massimo Maso [Sirio]
0 !LDRAW_ORG Unofficial_Part
0 !LICENSE Redistributable under CCAL version 2.0 : see CAreadme.txt

0 BFC CERTIFY CCW

0 !HISTORY 2016-03-18 {LEGO Digital Designer} Original part shape
0 !HISTORY 2017-12-16 [Sirio] File preparation for LDraw Parts Tracker

0 // Subparts
Status:
Certified! (ACCCN)
Size: 23187 bytes
Reviewers' certifications:
GeraldLasser=certify
MagFors=certify
Philo=certify
cwdee=certify
Required (unofficial) subfiles:
Hi-Res Cone 10 x 0.25
Status: Certified! (ACCN)
Hi-Res Cone 27 x 0.25
Status: Certified! (ACCN)
Hi-Res Cone 7 x 0.25
Status: Certified! (ACCN)
Hi-Res Cone 9 x 0.25
Status: Certified! (ACCF)
Related (unofficial) subfiles:
(none)
File reviews and updates:
At Sat Nov 18 08:25:01 2017, the file was initially submitted.
Submitted by: Sirio
At Sun Dec 3 15:40:00 2017, the following review was posted:

Reviewer: MagFors
Certification: hold
Comments:
Bad cond-lines since the new primitives are off.
The two 45 degree supports on the bottom are too long.
Duplicated surfaces inside one of the two bottom halves

At Thu Dec 7 18:20:01 2017, the following review was posted:

Reviewer: MagFors
Certification: hold
Comments:
Might need new condlines now that the prims are corrected.

At Fri Dec 15 21:40:00 2017, a new version of the file was submitted.
Submitted by: Sirio
Comments:
Fixed condlines, removed overlapping, fixed length of supports.

The design of the bottom was copied from the official part 87926.
Existing certification-votes were deleted.
At Sun Jan 21 15:50:01 2018, the following review was posted:

Reviewer: MagFors
Certification: hold
Comments:
All cond-lines are green

This should be removed:
1 16 0 140 0 0 0 60 0 -1 0 -60 0 0 48\1-4aring.dat

I don't see why not more of the surfaces are placed in the subfile

At Sun Feb 11 23:35:01 2018, a new version of the file was submitted.
Submitted by: Sirio
Comments:
Moved some faces to the subpart.

Existing certification-votes were deleted.
At Sun Mar 18 20:55:00 2018, the following review was posted:

Reviewer: MagFors
Certification: hold
Comments:

The small top hole has hi-res edge-prims, while the 2-4cyli is normal res.

This cond-line is wrong, and not needed:
5 24 0 144 -60 0 138 -60 -22.961 144 -55.4328 22.961 144 -55.4328
At Wed Mar 21 23:20:01 2018, a new version of the file was submitted.
Submitted by: Sirio
Existing certification-votes were deleted.
At Wed Sep 12 21:20:02 2018, the following review was posted:

Reviewer: MagFors
Certification: certify
No comments were posted with this review.

At Wed Dec 12 21:20:01 2018, the following review was posted:

Reviewer: MMR1988
Certification: certify
No comments were posted with this review.

At Mon Dec 17 17:50:02 2018, a new version of the file was submitted.
Submitted by: Sirio
Comments:
I moved here triangles and quads on the specular line; there are no more overlaps.
These faces are in the main part for not having flat faces separated by dummy lines.

If it is acceptable, Magnus, you have to change accordingly your main part (87926).

Existing certification-votes were deleted.
At Tue Dec 18 20:00:01 2018, a new version of the file was submitted.
Submitted by: Sirio
Comments:
The faces:
4 16 -36.4645 144 -36.4645 -34.3431 144 -34.3431 -32 144 -40 -32.9289 144 -40
4 16 -39.598 144 -39.598 -35.9633 144 -42.7855 -36.8402 144 -47.3254 -42.4264 144 -42.4264
are now in the subpart (Y quote changed to 0).

At Tue Dec 18 22:25:01 2018, the following review was posted:

Reviewer: MagFors
Certification: certify
No comments were posted with this review.

At Sun Nov 24 07:05:02 2019, the following review was posted:

Reviewer: cwdee
Certification: certify
No comments were posted with this review.

At Sun Nov 24 11:50:02 2019, the following review was posted:

Reviewer: MagFors
Certification: certify
Comments:
bump

At Fri Nov 29 09:35:01 2019, the following review was posted:

Reviewer: GeraldLasser
Certification: hold
Comments:
The 48\1-4con9 primitive is missing a cond-line, that's why one seam is not displayed correctly (not the hold reason, and I will re-submit it to Chris)

Hold reason:
The Edge at the top is still Hi-Res, but the rings and the cyli is still standard-Res, that should be changed:

so change:
0 BFC INVERTNEXT
1 16 0 0 0 -6 0 0 0 4 0 0 0 -6 2-4cyli.dat

to

0 BFC INVERTNEXT
1 16 0 0 0 -6 0 0 0 4 0 0 0 -6 2-4cylo.dat

and remove the 48-seg edgelines
1 16 0 0 0 -6 0 0 0 1 0 0 0 -6 48\2-4edge.dat
1 16 0 4 0 -6 0 0 0 1 0 0 0 -6 48\2-4edge.dat

At Fri Nov 29 12:05:02 2019, the following review was posted:

Reviewer: cwdee
Certification: novote
No comments were posted with this review.

At Fri Nov 29 16:35:01 2019, the following review was posted:

Reviewer: MagFors
Certification: novote
Comments:
It's also possible to use 2-4ndis and 2 x 48\1-4chrd instead of three 2-4ring + aring.
Both sides of the top surface, and on top of the bottom surface.

At Sun Dec 1 15:30:02 2019, a new version of the file was submitted.
Submitted by: Sirio
Existing certification-votes were deleted.
At Sun Dec 1 16:00:01 2019, the following review was posted:

Reviewer: MagFors
Certification: certify
No comments were posted with this review.

At Sun Dec 1 16:35:02 2019, the following review was posted:

Reviewer: Philo
Certification: certify
No comments were posted with this review.

At Sun Dec 1 19:20:02 2019, the following review was posted:

Reviewer: GeraldLasser
Certification: certify
Comments:
Thansk!

At Mon Dec 2 17:05:01 2019, the following review was posted:

Reviewer: cwdee
Certification: certify
No comments were posted with this review.