Unofficial File parts/18590.dat
part image
File Header:
0 Technic Gearwheel with Pin Holes and Short Shaft
0 Name: 18590.dat
0 Author: Massimo Maso [Sirio]
0 !LDRAW_ORG Unofficial_Part
0 !LICENSE Redistributable under CCAL version 2.0 : see CAreadme.txt

0 BFC CERTIFY CCW

0 !KEYWORDS Ninjago

0 !HISTORY 2018-01-28 {LEGO Digital Designer} Original part shape
0 !HISTORY 2020-03-28 [Sirio] File preparation for LDraw Parts Tracker

0 // Subparts
Status:
2 subfiles aren't certified. (CSSN)
Size: 8577 bytes
Reviewers' certifications:
MMR1988=certify
Required (unofficial) subfiles:
Related (unofficial) subfiles:
(none)
File reviews and updates:
At Mon Apr 13 08:11:32 2020, the file was initially submitted.
Submitted by: Sirio
Comments:
In the description I have indicated "Short Shaft" because there is also a version with "Long Shaft" (code 36009). At the moment I have not found a reference detailed enough to be able to make it. It seems to me that the differences are quite limited and should only concern the main file.

At Wed Apr 22 06:40:01 2020, a new version of the file was submitted.
Submitted by: Sirio
Comments:
Reduced number of sides.

At Sun Apr 26 17:00:01 2020, the following review was posted:

Reviewer: MagFors
Certification: hold
Comments:
I think the bottom cross is missing some condlines.

This prim makes an unwanted edgeline
1 16 0 49.85 0 14 0 0 0 -10.6 0 0 0 14 4-4cylo.dat
At Thu Apr 30 06:10:01 2020, a new version of the file was submitted.
Submitted by: Sirio
Existing certification-votes were deleted.
At Fri May 8 09:05:01 2020, the following review was posted:

Reviewer: MagFors
Certification: hold
Comments:
The cross on the bottom tip is still missing condlines.
Why is that surface both convex and concave?

At Sun May 10 13:40:01 2020, a new version of the file was submitted.
Submitted by: Sirio
Comments:
Replaced 8 edge lines on the cross with 8 conditional lines.

I made the cross with the double slope at y = 77.129 because so I found it in the reference.
The two sloped surfaces of each arm should be planes and therefore there should be no lines on them.
Existing certification-votes were deleted.
At Sun Oct 10 19:55:01 2021, the following review was posted:

Reviewer: MMR1988
Certification: hold
Comments:
Misses some condlines at the "cross".

At Mon Oct 11 17:20:01 2021, a new version of the file was submitted.
Submitted by: Sirio
Comments:
Added the missing lines.
They should be flat faces; convexity is due to approximations

Existing certification-votes were deleted.
At Mon Oct 11 18:45:01 2021, the following review was posted:

Reviewer: MMR1988
Certification: certify
Comments:
Yes, I know. ;-)

At Sun Nov 14 08:40:01 2021, the following review was posted:

Reviewer: MagFors
Certification: hold
Comments:
Still think they should be convex. The short lines in the corners show up too soon.
Instead of this:
4 11 2.5 77.129 10 1.7 80 1.7 -1.7 80 1.7 -2.5 77.129 10
3 11 -2.5 79.7523 2.5 -2.5 77.129 10 -1.7 80 1.7
3 11 1.7 80 1.7 2.5 77.129 10 2.5 79.7523 2.5
do like this:
4 12 2.5 79.7523 2.5 -2.5 79.7523 2.5 -2.5 77.129 10 2.5 77.129 10
4 12 -1.7 80 1.7 -2.5 79.7523 2.5 2.5 79.7523 2.5 1.7 80 1.7

As an engineer I know what Z8 is, but I don't think it is used in our descriptions.

And I don't understand why Flywheel Socket" is in the description.
If I understand the play feature right, this is the flywheel spinner centre axle. Or something like that.
18585 is the Flywheel Socket.

At Mon Nov 15 22:25:01 2021, a new version of the file was submitted.
Submitted by: Sirio
Existing certification-votes were deleted.
At Tue Nov 16 20:55:01 2021, the following review was posted:

Reviewer: MMR1988
Certification: certify
No comments were posted with this review.