Unofficial File parts/16981.dat
part image
File Header:
0 Plant Vine with 10 Leaves 16L
0 Name: 16981.dat
0 Author: Philippe Hurbain [Philo]
0 !LDRAW_ORG Unofficial_Part
0 !LICENSE Redistributable under CCAL version 2.0 : see CAreadme.txt

0 BFC CERTIFY CCW

0 !KEYWORDS Liana

Status:
Needs more votes. (CN)
Size: 830 bytes
Reviewers' certifications:
MMR1988=novote
MagFors=certify
Philo=novote
Required (unofficial) subfiles:
Related (unofficial) subfiles:
(none)
File reviews and updates:
At Wed Feb 6 12:10:01 2019, the file was initially submitted.
Submitted by: Philo
At Sun Feb 10 09:40:01 2019, the following review was posted:

Reviewer: MagFors
Certification: novote
Comments:
Should the origin be in the middle of the part?

At Sun Feb 10 12:45:01 2019, a new version of the file was submitted.
Submitted by: Philo
Comments:
Added keyword

Existing certification-votes were deleted.
At Sun Feb 10 12:50:02 2019, the following review was posted:

Reviewer: Philo
Certification: novote
Comments:
As for origin, I tend to think it's more convenient this way. At least, it's really more practical for LDCad templates... so for the sake of consistency...

At Sun Feb 10 13:15:01 2019, the following review was posted:

Reviewer: Philo
Certification: novote
Comments:
For the record, here is a LDCad template for the vine (done with Roland's help!!!):
0 Plant Vine flexible
0 Author: LDCad
0 !CATEGORY plant
0 !KEYWORDS flexible
0 !LDCAD CONTENT [type=path] [addFallBack=default] [looped=false] [displayKind=mm] [curveStep=0] [displayLenCor=0]

0 !LDCAD PATH_POINT [type=bezier] [posOri=-39 0 0 0 1 0 -1 0 0 0 0 1] [prevCPDist=25] [nextCPDist=25] [cirR=20] [cirDir=xyCW] [prevYRoll=0] [nextYRoll=0]
0 !LDCAD PATH_POINT [type=bezier] [posOri=-281 0 0 0 1 0 -1 0 0 0 0 1] [prevCPDist=25] [nextCPDist=25] [cirR=20] [cirDir=xyCW] [prevYRoll=0] [nextYRoll=0]

0 !LDCAD PATH_SKIN [donCol=16] [donOri=0 -1 0 1 0 0 0 0 1] [donPart=16981k04.dat] [donYSize=8] [donCen=absCen] [donCenYOfs=0] [donFinScale=segMerge] [donPlace=refsStat] [donYAlign=0] [donInline=false] [segSize=62.5%] [segSizeTol=20%] [segsCnt=0] [segsGrp=1] [segsMaxMerge=0] [segsMrgAng=0] [segsMrgRollAng=0] [segsEdgeDelKind=keepFirstLeft]
0 !LDCAD PATH_SKIN [donCol=16] [donOri=0 -1 0 1 0 0 0 0 1] [donPart=16981k04.dat] [donYSize=8] [donCen=absCen] [donCenYOfs=0] [donFinScale=segMerge] [donPlace=refsStat] [donYAlign=0] [donInline=false] [segSize=62.5%] [segSizeTol=20%] [segsCnt=0] [segsGrp=1] [segsMaxMerge=0] [segsMrgAng=0] [segsMrgRollAng=0] [segsEdgeDelKind=keepFirstLeft]
0 !LDCAD PATH_SKIN [donCol=16] [donOri=0 -1 0 1 0 0 0 0 1] [donPart=16981k01.dat] [donYSize=24] [donCen=partCen] [donCenYOfs=0] [donFinScale=none] [donPlace=refsStat] [donYAlign=0] [donInline=false] [segSize=0%] [segSizeTol=0%] [segsCnt=0] [segsGrp=1] [segsMaxMerge=0] [segsMrgAng=0] [segsMrgRollAng=0] [segsEdgeDelKind=keepFirstLeft]
0 !LDCAD PATH_SKIN [donCol=16] [donOri=0 -1 0 1 0 0 0 0 1] [donPart=16981k04.dat] [donYSize=9] [donCen=absCen] [donCenYOfs=0] [donFinScale=segMerge] [donPlace=refsStat] [donYAlign=0] [donInline=false] [segSize=62.5%] [segSizeTol=20%] [segsCnt=0] [segsGrp=1] [segsMaxMerge=0] [segsMrgAng=0] [segsMrgRollAng=0] [segsEdgeDelKind=keepFirstLeft]
0 !LDCAD PATH_SKIN [donCol=16] [donOri=0 -1 0 1 0 0 0 0 1] [donPart=16981k04.dat] [donYSize=9] [donCen=absCen] [donCenYOfs=0] [donFinScale=segMerge] [donPlace=refsStat] [donYAlign=0] [donInline=false] [segSize=62.5%] [segSizeTol=20%] [segsCnt=0] [segsGrp=1] [segsMaxMerge=0] [segsMrgAng=0] [segsMrgRollAng=0] [segsEdgeDelKind=keepFirstLeft]
0 !LDCAD PATH_SKIN [donCol=16] [donOri=0 -1 0 1 0 0 0 0 1] [donPart=16981k02.dat] [donYSize=24] [donCen=partCen] [donCenYOfs=0] [donFinScale=none] [donPlace=refsStat] [donYAlign=0] [donInline=false] [segSize=0] [segSizeTol=5%] [segsCnt=0] [segsGrp=1] [segsMaxMerge=0] [segsMrgAng=0] [segsMrgRollAng=0] [segsEdgeDelKind=keepFirstLeft]
0 !LDCAD PATH_SKIN [donCol=16] [donOri=0 -1 0 1 0 0 0 0 1] [donPart=16981k04.dat] [donYSize=9] [donCen=absCen] [donCenYOfs=0] [donFinScale=segMerge] [donPlace=refsStat] [donYAlign=0] [donInline=false] [segSize=62.5%] [segSizeTol=20%] [segsCnt=0] [segsGrp=1] [segsMaxMerge=0] [segsMrgAng=0] [segsMrgRollAng=0] [segsEdgeDelKind=keepFirstLeft]
0 !LDCAD PATH_SKIN [donCol=16] [donOri=0 -1 0 1 0 0 0 0 1] [donPart=16981k04.dat] [donYSize=10] [donCen=absCen] [donCenYOfs=0] [donFinScale=segMerge] [donPlace=refsStat] [donYAlign=0] [donInline=false] [segSize=62.5%] [segSizeTol=20%] [segsCnt=0] [segsGrp=1] [segsMaxMerge=0] [segsMrgAng=0] [segsMrgRollAng=0] [segsEdgeDelKind=keepFirstLeft]
0 !LDCAD PATH_SKIN [donCol=16] [donOri=0 -1 0 1 0 0 0 0 1] [donPart=16981k04.dat] [donYSize=10] [donCen=absCen] [donCenYOfs=0] [donFinScale=segMerge] [donPlace=refsStat] [donYAlign=0] [donInline=false] [segSize=62.5%] [segSizeTol=20%] [segsCnt=0] [segsGrp=1] [segsMaxMerge=0] [segsMrgAng=0] [segsMrgRollAng=0] [segsEdgeDelKind=keepFirstLeft]
0 !LDCAD PATH_SKIN [donCol=16] [donOri=0 -1 0 1 0 0 0 0 1] [donPart=16981k04.dat] [donYSize=10] [donCen=absCen] [donCenYOfs=0] [donFinScale=segMerge] [donPlace=refsStat] [donYAlign=0] [donInline=false] [segSize=70%] [segSizeTol=20%] [segsCnt=0] [segsGrp=1] [segsMaxMerge=0] [segsMrgAng=0] [segsMrgRollAng=0] [segsEdgeDelKind=keepFirstLeft]

0 !LDCAD PATH_CAP [group=start] [color=16] [posOri=0 0 0 1 0 0 0 1 0 0 0 1] [part=16981k03.dat] [extraLen=2] [inlineRef=false]
0 !LDCAD PATH_CAP [group=end] [color=16] [posOri=-320 0 0 -1 0 0 0 -1 0 0 0 1] [part=16981k03.dat] [extraLen=2] [inlineRef=false]

And yes, there is a LDCad display bug for the mirrored leaf.

At Tue Feb 12 20:15:02 2019, the following review was posted:

Reviewer: MagFors
Certification: certify
No comments were posted with this review.

At Tue Feb 12 20:30:01 2019, the following review was posted:

Reviewer: MagFors
Certification: certify
Comments:

Where do I place that info and how should I name that file?

At Wed Feb 13 06:45:01 2019, the following review was posted:

Reviewer: Philo
Certification: novote
Comments:
Put this stuff in a .ldr file, and place this file in %appdata%\LDCad\templates\path

At Sun Sep 29 20:45:02 2019, the following review was posted:

Reviewer: MMR1988
Certification: novote
Comments:
This direction or turned 90 degrees around Y -Axis?

Where can we store the code for further use or will Roland include this in the next LDCad release?