Unofficial File parts/11538.dat
part image
File Header:
0 Minifig Helmet with Cheeck Protectors and Communicator
0 Name: 11538.dat
0 Author: Bertrand Lequy [Berth]
0 !LDRAW_ORG Unofficial_Part
0 !LICENSE Redistributable under CCAL version 2.0 : see CAreadme.txt

0 BFC CERTIFY CCW

0 !CATEGORY Minifig Headwear
0 !KEYWORDS Star Wars, SW, A-Wing, Rebel

0 !HISTORY 2013-08-14 {LEGO Digital Designer} Original part shape
0 !HISTORY 2021-09-07 [Berth] File preparation for LDraw Parts Tracker

Status:
1 'hold' vote. (HSSSSSSSSSN)
Size: 1130 bytes
Reviewers' certifications:
MagFors=hold
Required (unofficial) subfiles:
Related (unofficial) subfiles:
(none)
File reviews and updates:
At Wed Sep 8 14:25:02 2021, the file was initially submitted.
Submitted by: Berth
Comments:
Please take a look here for the subfiling :
https://rebrickable.com/parts/11538/minifig-helmet-rebel-with-check-protectors-star-wars-plain/#rel_parts
(I have 3 of them at home)

At Wed Sep 8 15:30:01 2021, the following review was posted:

Reviewer: MagFors
Certification: novote
Comments:
Please reconsider the subfile structure.

1.) It would be better to have the unprinted inside, and all the loose primitives (and any added edge/condlines) in a single s01 subfile.
Used as the base subfile for all the differently patterned version. If not, you will have to add the stud4 and all the edge/condlines into every printed version.

2.) If you have all edge/condlines in the top level part they will all have the colour of the main part. I guess you want to give some of the subfiles a single colour. Say red or blue.
And then the main file is used white in a model. You will have white edge/condlines on the red and blue surfaces.
At Wed Sep 8 15:30:01 2021, the following review was posted:

Reviewer: GeraldLasser
Certification: novote
Comments:
OMG, the next helmet subfile-mania like the Mandalorian one :-)

At Wed Sep 8 16:40:01 2021, the following review was posted:

Reviewer: Berth
Certification: novote
Comments:
@Magnus : Indeed, I'm going to rethink this

@Gerald : there's far less print for this one :D

At Wed Sep 8 16:45:01 2021, a new version of the file was submitted.
Submitted by: Berth
Comments:
s01 reworked

Existing certification-votes were deleted.
At Thu Oct 7 15:50:01 2021, the following review was posted:

Reviewer: MagFors
Certification: hold
Comments:
Both edge and condlines:
2 24 2.108 10.241 20.256 2.157 9.08 19.986
2 24 2.157 9.08 19.986 2.189 8.039 19.482
2 24 2.189 8.039 19.482 2.227 6.308 17.913
5 24 2.204 8.039 19.482 2.171 9.08 19.986 0 8.883 20.282 2.416 9.02 19.385
5 24 2.171 9.08 19.986 2.123 10.241 20.256 2.463 9.915 19.46 0 10.211 20.502
5 24 2.241 6.308 17.913 2.204 8.039 19.482 0 7.665 19.742 2.586 8.303 18.244
Hold-voting for this error.

Before you start and make a lot of patterns on this, you should try to have as many "convex surfaces" as possible.
Like here:
3 12 9.391 -7.373 -5.394 12.697 -3.353 -5.208 7.52 -5.941 -10.672
3 12 7.52 -5.941 -10.672 12.697 -3.353 -5.208 10.429 -2.634 -10.767
These two make a concave surface and should be changed so that it is convex.
Generating unwanted condlines, that show up " too early"

And here's some more examples of surfaces that need fixing:
3 11 6.661 7.903 16.929 7.866 8.411 17.312 7.045 7.954 16.447
3 11 7.045 7.954 16.447 7.866 8.411 17.312 7.593 7.821 16.318
3 11 7.026 -5.107 11.969 5.674 -3.038 11.902 6.123 -2.965 11.924
3 11 5.358 -3.363 11.897 5.674 -3.038 11.902 7.026 -5.107 11.969
These are probably flat on the real part. No ditch.
Generating unwanted condlines, that show up " too early".

At Fri Jan 14 02:35:01 2022 a Parts Tracker Admin edited the header.