Unofficial File parts/11216.dat
part image
File Header:
0 Bar Grille 13 x 17 with Studs and Tips
0 Name: 11216.dat
0 Author: Massimo Maso [Sirio]
0 !LDRAW_ORG Unofficial_Part
0 !LICENSE Redistributable under CCAL version 2.0 : see CAreadme.txt

0 BFC CERTIFY CCW

0 !KEYWORDS Castle, Gate, Portcullis, Star Wars

0 !HISTORY 2013-08-14 {LEGO Digital Designer} Original part shape
0 !HISTORY 2020-11-04 [Sirio] File preparation for LDraw Parts Tracker

0 // Subparts
Status:
4 subfiles aren't certified. (CCSSSSN)
Size: 4678 bytes
Reviewers' certifications:
Holly-Wood=certify
MagFors=certify
Required (unofficial) subfiles:
Related (unofficial) subfiles:
(none)
File reviews and updates:
At Wed Nov 4 22:35:01 2020, the file was initially submitted.
Submitted by: Sirio
Comments:
At the moment, for the external bars I used various combination of long and short cylinders to have fewer faces but with some T-Junction.
You could avoid some of T-Junctions between subpart s01 and rect2p by removing the square faces from 11216s04 and using triangles, but there would probably be a lot of very thin triangles.

At Thu Nov 5 22:15:02 2020, the following review was posted:

Reviewer: MMR1988
Certification: hold
Comments:
I'm happy with the design. There are only to points I would like to see changed.
1) some of the traingle surface around the single hole ndis can be combinded to a quad (this will result in 4 triangles and 4 quads per side instead of 12 triangles. (It's just change the line count.)
2) There is a bleed in at the at the surface where s02 and s3 subparts are positioned. I think you should change this singe quad to several small ones beetwen the teeth.

At Fri Nov 6 23:10:02 2020, a new version of the file was submitted.
Submitted by: Sirio
Comments:
I hope I understand how you intended to modify the base of the tips.

Existing certification-votes were deleted.
At Sat Nov 7 00:00:02 2020, the following review was posted:

Reviewer: MMR1988
Certification: certify
Comments:
Yes, you did. :-)

At Wed Nov 11 23:20:02 2020, the following review was posted:

Reviewer: Sirio
Certification: hold
Comments:
I put all these parts on hold because i realized they already exist for 89513 which is already official. Sorry.

There are some differences between my version and the already official one. My version is smoother but some dimensions don't match.

The subparts indicated by me as 11216s02 and 11216s03 must disappear or possibly be renamed as 89513s02 and 85913s03.
Subpart 11216s04 may remain, but for consistency it must be renamed 85913s04 and modified 89513s01 accordingly.

There is the problem of the description: it is necessary to decide whether these parts are part of the Door or Bar group and then adapt the description of 85913 accordingly. This must however be modified to differentiate 89513 from 89519.

In 89513 the logo inside the studs is on both sides. Is it correct or should it only be placed on one side?
If you have to modify 89513, perhaps at that point it might be convenient to create a common subpart with 89519 so that you have the same frame and only change the stud lines between open and closed studs.
I would also change the orientation of 89513s03, to make it the same as that of 89513s02.

At Wed Mar 17 15:00:01 2021 a Parts Tracker Admin edited the header.
At Thu Mar 18 22:50:01 2021, the following review was posted:

Reviewer: Sirio
Certification: certify
Comments:
Wth Chris we have verified that the part 89513 does not exist. It will be made obsolete.
Parts 89519 and 11216 can resume the approval process.

At Sat Mar 20 07:35:02 2021, a new version of the file was submitted.
Submitted by: Sirio
Comments:
Added inner stop ring to studs in backside.

Existing certification-votes were deleted.
At Tue Apr 20 17:35:01 2021, the following review was posted:

Reviewer: MagFors
Certification: hold
Comments:
The same typo is present in this file, all the subfiles and 89519 and its subfile.
The dimensions should not be written with a capital X. It should be "13 x 17".

In this file there's a typo in one of the comments: Suparts

May I suggest another subfile?
1 11 0 0 -20 1 0 0 0 1 0 0 0 1 s\11216s01.dat
0 BFC INVERTNEXT
1 11 0 4 -20 10 0 0 0 -2 0 0 0 7 box3u8p.dat
0 BFC INVERTNEXT
1 11 0 -4 -20 10 0 0 0 2 0 0 0 7 box3u8p.dat
1 11 -120 0 10 0 0 4 4 0 0 0 -20 0 2-4cylo.dat
1 11 -80 0 10 0 0 4 4 0 0 0 -20 0 4-4cylo.dat
1 11 -40 0 10 0 0 4 4 0 0 0 -20 0 4-4cylo.dat
1 11 0 0 10 0 0 4 4 0 0 0 -20 0 4-4cylo.dat
1 11 40 0 10 0 0 4 4 0 0 0 -20 0 4-4cylo.dat
1 11 80 0 10 0 0 4 4 0 0 0 -20 0 4-4cylo.dat
1 11 120 0 10 0 0 -4 4 0 0 0 -20 0 2-4cylo.dat
This set of code is repeted 7 times in this file, but not on the top row.

The same could be done in 89519
At Wed Apr 21 22:15:02 2021, a new version of the file was submitted.
Submitted by: Sirio
Comments:
Added subpart and updated description.

Existing certification-votes were deleted.
At Thu Apr 22 15:40:02 2021, the following review was posted:

Reviewer: MagFors
Certification: certify
No comments were posted with this review.

At Sun Jul 11 07:35:01 2021, the following review was posted:

Reviewer: Holly-Wood
Certification: certify
Comments:
As this part came just in one set back in 2013 I would add:

Rancor Pit, set 75005 as keywords