LEdit Keys:
|
Arrow keys
Home
End
| Move current piece. |
Page Up
| Select previous piece. |
Page Down
| Select next piece. |
Enter
| Draw current piece. |
A
| Turn current piece a quarter turn clockwise. |
C
| Gets prompt to change piece color. Enter the color number. |
E
| Erase and redraw screen. |
I
| Insert a new piece. |
M
| Change increment for moving piece with arrow, Home, or End keys. Hitting M once changes from Normal (half stud sideways / 1 plate thickness up) to Coarse (5 studs sideways / 10 plate thicknesses up). Hitting M again changes to Fine (twentieth of a stud sideways / eighth of a plate up). Hiiting M again changes back to Normal. |
O
| Gets prompt to change offset, the position of the viewing screen over the model. You must choose an axis (X, Y, or Z). |
OX
| Gets prompt to change offset in the X direction. Enter the number of LDraw units (Stud widths times 20) you want to move the view. |
OY
| Gets prompt to change offset in the Y direction. Enter the number of LDraw units (Plate heights times 8) you want to move the view. |
OZ
| Gets prompt to change offset in the Z direction. Enter the number of LDraw units (Stud widths times 20) you want to move the view. |
P
| Gets prompt to change the piece. Enter the part number or hit Enter to get a parts list. |
W
| Swap the current piece with the next piece. |
X
| Gets prompt to move the current piece in the X direction. Enter the number of LDraw units (Stud widths times 20) you want to move the piece. |
Y
| Gets prompt to move the current piece in the Y direction. Enter the number of LDraw units (Plate heights times 8) you want to move the piece. |
Z
| Gets prompt to move the current piece in the Z direction. Enter the number of LDraw units (Stud widths times 20) you want to move the piece. |
-
| Zoom out. |
+
| Zoom in. |
LEdit Menu Shortcut Keys:
|
/
Esc
| Jump to menus at the top of the screen. |
/F
| Jump to File menu. |
/FL
| Get prompt to load a file. Enter the filename. |
/FS
| Get prompt to save the current model. Enter the filename you want to save as. |
/FE
| Exit LEdit. |
/E
| Jump to Edit menu. |
/EI
| Insert a new piece. |
/ED
| Delete the current piece. |
/ES
| Swap the current piece with the next piece. |
/EL
| Get Prompt to change Line-Type. |
/ELP
| Change Line-Type to a piece. |
/ELC
| Change Line-Type to a comment. Enter the comment. |
/ELS
| Change Line-Type to a step. |
/V
| Jump to View menu. |
/VF
| Change to front view. |
/VR
| Change to right side view. |
/VL
| Change to left side view. |
/VB
| Change to back view. |
/VO
| Change to over (top) view. |
/VU
| Change to under (bottom) view. |
/VT
| Change to three dimensional (default) view. |
/VI
| Zoom in. |
/VC
| Center the view above the current cursor position. (Easier than using Offset). |
/T
| Jump to Turn menu. |
/TX
| Get prompt to turn the current piece around the X axis. Enter the number of degrees to turn the piece. |
/TY
| Get prompt to turn the current piece around the Y axis. Enter the number of degrees to turn the piece. |
/TZ
| Get prompt to turn the current piece around the Z axis. Enter the number of degrees to turn the piece. |
/TC
| Set the axes (X, Y, and Z) to go through the current cursor position. |
/P
| Jump to Piece menu. |
/PF
| Gets prompt to change the piece. Enter the part number or hit Enter to get a parts list. |
/PC
| Gets prompt to change piece color. Enter the color number. |
/PG
| Gets prompt to go to a different piece in the model. Enter the line number of the piece, or enter a large number to get to the end of the model. |
/O
| Jump to Options menu. |
/OL
| Set LEdit to use lines instead of studs or studs instead of lines, switching the current setting. |
/OS
| Set LEdit to start drawing at the current piece the next time the screen is erased. |
/Q
| Exit LEdit. |
