Fixes as of May 17, 1999 and released as an entire update, lcad9903: This update is almost entirely fixed/modified parts, but there are several new pieces that were approved in vote 9902 but not released. (see also file part9903.txt for a description list of pieces contained in this update) -Annoying change ALERT. **** READ THIS **** In order to correct both incorrect numbers and to conform to the numbering scheme, the following files were changed. The problem is that no corresponding "~Moved to" files could be created to make the change painless. So, ANY MODEL YOU HAVE THAT USES NUMBERS FROM THE LEFT SIDE OF THIS LIST MUST BE CHANGED BY HAND. Failure to do so will cause the model to have the wrong piece in it: OLD NUMBER NEW NUMBER 3137 was changed to 3137c01 with NO ~moved to file. 3149 was changed to 3149c01 with NO ~moved to file. 3324 was changed to 3324c01 with NO ~moved to file. 3939 was changed to 3942 with NO ~moved to file. 3942 was changed to 3943 with NO ~moved to file. What these pieces were: 3137 WAS Brick 2 x 2 with Wheels 3149 WAS Hinge Plate 2 x 5 3324 WAS Hinge Plate 2 x 9 3939 WAS Cone 2 x 2 x 2 3942 WAS Cone 4 x 4 x 2 Note that the last two 3939/3942 directly conflict with each other. My sincerest apologies for this. But in order to fix things, we have to bite the bullet sometime. ******************* -Parts from last vote (9902) held, and added now. Parts added in #16 default gray (holdovers from vote 9902): 2524 Minifig Backpack Non-Opening 2574 Wheel Pull-Back Motor 890 Roadsign Clip-on 2 X 2 Octagonal 30 Technic Hook Large Metallic 37 Minifig Knife 38 Minifig Harpoon 71427c01 Electric Technic Mini-Motor 9v Shortcuts added with correct color/number in "_" underscore type category (holdovers from vote 9902): 70496 _Technic Hook Large Metallic (uses 30.dat in #0 black) 71427 _Electric 9V Mini-Motor (uses 71427c01.dat in #7 gray) 80394 _Container Box 2 x 2 x 2 Door with Slot and Fire Logo Pattern (uses 4346p01.dat in #15 white) 81038 _Hose Reel 2 x 4 x 2 Holder with Fire Logo Pattern (uses 4209p01.dat in #4 red) 81155 _Castle Wall 3 x 3 x 6 Corner with Blacktron I Logo Pattern (uses 2345p44.dat in #0 black) -Existing parts modified to to be TLG Color-Correct: 80120 _Panel 1 x 4 x 3 with Red Bar and White Grille Pattern (uses 4215p01.dat in #47 trans-white) 80671 _Baseplate 32 x 32 Road 9-Stud Landing Pad with Green Octagon (uses 6099p02.dat in #0 black) 80672 _Baseplate 32 x 32 Road 9-Stud T Intersection with Green Octagon (uses 608p02.dat in #0 black) -Fixed small yellow spot on end, and incorrect primitive references: 6042 Brick 2 x 2 x 3 & 1/3 Octagonal With Side Studs -Changed "STUD" references to "stud". Having the capitalized "STUD" caused LEdit to not display studs as lines. 2463 Brick 3 x 3 x 2 Facet Top 2598 Windscreen 10 x 10 x 4 Bubble Top (Aquanaut) 3005-AE Brick 1 x 1 with Blue Danish "AE" Pattern 3008P21 Brick 1 x 8 with Light Blue Squares Pattern 3009P21 Brick 1 x 6 with Light Blue Squares Pattern 3010P21 Brick 1 x 4 with Light Blue Squares Pattern 30185 Window Bay 3 x 8 x 6 30195 Plate 2 x 6 with Half Saucer 3231 Train Track Crossing - 4.5 V 4082 Container Box 6 x 8 x 1 & 1/3 4461 Container Box 4 x 4 x 2 with Hollowed-Out Semi-Circle 6063 Plate 10 x 10 Octagonal Open Center 6084 Windscreen Top (Aquanaut Sub) 721 Garage 4 x 8 x 3 -Contrary to the above - changed "stud" to "STUD" so that the stud end is *finally* visible in LEdit even when the [Line-as-Stud] option is (ON): 4735 Space Robot Arm 4599 Tap 1 x 1 2569 Antenna Whip 8H 4081 Plate 1 x 1 with Clip Light 6140 Bar 1 x 6 with Studs Closed 4873 Bar 1 x 6 with Studs Open 4590 Plate 1 x 4 Offset 4596 Space Wing 4 x 2 2566 Plants Tree Palm Top -Pattern enhancements. 3626BP02 Minifig Head with Standard Woman Pattern 9326P14 Minifig Torso with 'S' Logo Pattern 2345p44 Castle Wall 3 x 3 x 6 Corner with Blacktron I Logo Pattern (also re-aligned this part to match original) -Description changes (for sorting or consolidation of categories). 2837A Electric Technic Motor 9V 2837 Part of above 2838 Part of above 2839 Part of above 2598 Windscreen 10 x 10 x 4 Octagonal Canopy 2418b Windscreen 6 x 6 Octagonal Canopy with Axlehole 2417 Plants Leaves 6 x 5 2423 Plants Leaves 4 x 3 3741 Plants Flower Stem 3742 Plants Flower (needs work) 6118 Wheel Hard-Plastic Small 2583 Wheel Hard-Plastic Medium 2573 Wheel Hard-Plastic Giant 4474 Windscreen 6 x 4 x 2 Canopy 2337 Windscreen 4 x 4 x 2 Canopy Extender 2507 Windscreen 10 x 4 x 2 & 1/3 Canopy 80671 Baseplate 32 x 32 Road 9-Stud Landing Pad with Green Octagon 80672 Baseplate 32 x 32 Road 9-Stud T Intersection with Green Octagon -Description changes for clarification. 20 ~Wheel Centre Small for Steel Axle 3482 Wheel Centre Large 4624 Wheel Centre Small 30027 Wheel Centre Small Wide for Slick Tyre - "~Moved to" files. 2418 ~Moved to 2418b due to added version of part - 2418a. 6 ~Moved To 3464 146 ~Moved To 2529 352 ~Moved To 4095 829 ~Moved To 3433 2748 ~Moved To 3857 2837a ~Moved To 2838c01 3944 ~Moved To 3961 3945 ~Moved To 3839 3946 ~Moved To 3963 3950 ~Moved To 3959 3137a ~Moved To 3137 3137b ~Moved To 20 3149a ~Moved To 313 3149b ~Moved To 314 3149c ~Moved To 3149 3324a ~Moved To 3324 3951 ~Moved To 3939 122 ~Moved To 122c01 3951p68 ~Moved To 3939p68 - Minor corrections to account for an internal reference to a moved file. 122 mod to use 20.dat 817 mod to use 20.dat -Major revisions to minifig torsos. All torsos were modified to use a new s\ directory subfile. 17 files were modified. This is to simplify and improve future torso patterns. In addition, all torsos have been moved to the 973 number. 9326 is *not* the correct number for an armless torso. ~Moved to files for all affected pieces ARE included. -Change to the design of the hose end/cup section 755 Hose Flexible Segment End Section Plus the other pieces in this range (754 & 756) had internal documentation changes. -Fixed minor header error 970p63a 971p63a 972p63a -Added optional lines to primitives 1-4con3.dat 1-4con4.dat --end--