Parts Tracker :: Parts List :: Activity :: Submit :: PT Tools :: PT Reference :: LDraw Specifications :: Lookup

Unofficial File parts/s/11291s01.dat

Next File | Prev File | Download | Review | Edit | CA Header Edit | Events

part image

File Header:

0 ~Wedge  3 x  4 x  0.666 Cutout - Side
0 Name: s\11291s01.dat
0 Author: Michael Heidemann [mikeheide]
0 !LDRAW_ORG Unofficial_Subpart
0 !LICENSE Redistributable under CCAL version 2.0 : see CAreadme.txt

0 BFC CERTIFY CCW

Status:
Needs more votes. (CX)
Size: 11447 bytes

Reviewers' certifications:

MMR1988=novote
Philo=certify
mikeheide=novote

Required (unofficial) subfiles:
(none)

Related (unofficial) files:

parts/11291.dat

Wedge 3 x 4 x 0.666 Cutout

1 subfile isn't certified. (CCSX)

Events

File reviews and updates:

At Sat Mar 30 11:15:05 2013, the file was initially submitted.
Submitted by: mikeheide
======================================================================
At Sat Mar 30 13:01:11 2013, the following review was posted:

Reviewer: MMR1988
Certification: hold
Comments:
There is a strange condline in the "front" bottum stud and there are some missing edges where this stud meets the cutout for the "top-stud"

======================================================================
At Sat Mar 30 13:10:12 2013, the following review was posted:

Reviewer: MMR1988
Certification: hold
Comments:
All in all, there are many strange condlines :-(

======================================================================
At Sat Mar 30 15:00:15 2013, the following review was posted:

Reviewer: mikeheide
Certification: novote
Comments:
Yes, you are right. I did not checked the whole file, sorry.

======================================================================
At Sat Mar 30 15:30:48 2013, a new version of the file was submitted.
Submitted by: mikeheide
Comments:
deleted some cond. lines, added some lines.

Existing certification-votes were deleted.
======================================================================
At Sat Mar 30 18:00:08 2013, the following review was posted:

Reviewer: Philo
Certification: novote
Comments:
The T-junctions are OK to me, the only thing that bothers me is the quad at line 198, it should be split in two (presently it bleeds on the bottom face)
Did you try Selector? It should have been very useful during the cleaning of this part.

======================================================================
At Sat Mar 30 19:25:03 2013, the following review was posted:

Reviewer: mikeheide
Certification: novote
Comments:
Ah, yes, I thought about splitting that for avoiding bleeding. Will be corrected.

======================================================================
At Sun Mar 31 12:00:09 2013, a new version of the file was submitted.
Submitted by: mikeheide
Existing certification-votes were deleted.
======================================================================
At Mon Apr 1 10:00:09 2013, the following review was posted:

Reviewer: MMR1988
Certification: novote
Comments:
I would like to see line #82 replaced by
4 4 -20 8 10 -23.75 8 6.25 -23 8 -48.5 -20 8 6
3 2 -20 8 6 -20 8 1.5 -23 8 -48.5
3 4 -20 8 1.5 -20 8 -6 -23 8 -48.5
3 2 -20 8 -6 -20 8 -10 -23 8 -48.5
3 4 -20 8 -10 -23 8 -48.5 -20 8 -48.5

and it would also be nice if the rear end faces could be done in a similar way.

By the way: The inside is of this part is doesn't match our system. This causes in 0.25 LDU thick gaps when using a stud.dat
1 4 -30 4 0 1 0 0 0 -1 0 0 0 1 stud.dat

======================================================================
At Mon Apr 1 12:45:08 2013, the following review was posted:

Reviewer: mikeheide
Certification: novote
Comments:
@MMR1988
I understand your concerns and I like your detailed view for all the tiny things.
But to be honest, if we all go with this detailed view we will never finish our library.
I am fine if a part has the correct shape and can be used like the real part. It would be great if we all could see the first raise of a part like this then we have working (not perfect) parts quickly for our audience. If we are going to make all parts perfect we will go far beyond all the new parts that comes every year.
I hope I find your understanding for my (and many other, not all) point of view for certifiying process.

======================================================================
At Wed Jan 22 15:55:02 2014, the following review was posted:

Reviewer: Philo
Certification: certify
Comments:
I am fully happy with the result...


© 2001-2014 LDraw.org, see Legal Info for details. This website is powered by Peeron.com.

LEGO® is a registered trademark of the LEGO Group, which does not sponsor, endorse, or authorize this site. Visit the official Lego website at http://www.lego.com/.
The LDraw system is a completely unofficial, community run free CAD system which represents official parts produced by the LEGO company.
The LDraw Parts Tracker is maintained and developed by voluntary members of the LDraw organisation.