Parts Tracker :: Parts List :: Activity :: Submit :: PT Tools :: PT Reference :: LDraw Specifications :: Lookup

Unofficial File parts/93250.dat

Next File | Prev File | Download | Review | Edit | CA Header Edit | Events

part image

File Header:

0 Minifig Eagle Wing
0 Name: 93250.dat
0 Author: Stan Isachenko [angmarec]
0 !LDRAW_ORG Unofficial_Part
0 !LICENSE Redistributable under CCAL version 2.0 : see CAreadme.txt

0 BFC CERTIFY CCW

0 !CATEGORY Minifig Neckwear
0 !KEYWORDS Pharaoh's Quest

0 !HISTORY 2011-10-14 {LEGO Digital Designer} Original part shape
0 !HISTORY 2011-11-29 [angmarec] File preparation for LDraw Parts Tracker
0 !HISTORY 2013-03-10 [Wesley] minor improvements, removed obsolete subpart reference
0 !HISTORY 2013-09-11 [MMR1988] Fixed edges

Status:
1 subfile isn't certified. (CCSX)
Size: 3483 bytes

Reviewers' certifications:

MagFors=certify
Steffen=certify

Required (unofficial) subfiles:

parts/s/93250s01.dat

~Minifig Eagle Wing 1/4

Needs admin review. (CCX)

Events

Related (unofficial) files:
(none)

File reviews and updates:

At Thu Oct 13 22:10:03 2011, the file was initially submitted.
Submitted by: angmarec
======================================================================
At Sun Oct 16 21:35:02 2011, a new version of the file was submitted.
Submitted by: angmarec
Comments:
Part is recreated from Rolf Osterthun raw data.

======================================================================
At Sun Oct 16 21:50:03 2011, a new version of the file was submitted.
Submitted by: angmarec
Comments:
Changed part orientation.

======================================================================
At Sun Oct 16 23:25:08 2011, a new version of the file was submitted.
Submitted by: MagFors
Comments:
BFC'ed and reduced primitive use.

... and that edge line between subfiles and primitives should be removed.

======================================================================
At Tue Oct 18 13:15:04 2011, the following review was posted:

Reviewer: Philo
Certification: hold
Comments:
There's a

======================================================================
At Tue Oct 18 13:20:03 2011, the following review was posted:

Reviewer: Philo
Certification: hold
Comments:
(Sorry, the gun went off by itself)
There's a duplicated ndis at line 20. The line is not really objectable, there's probably a molding mark there.

======================================================================
At Tue Oct 18 16:10:03 2011, a new version of the file was submitted.
Submitted by: MagFors
Comments:
Sorry, my fault.
What did you call it, Philo? Cut'n'paste blues.

Existing certification-votes were deleted.
======================================================================
At Tue Nov 29 21:00:08 2011, a new version of the file was submitted.
Submitted by: angmarec
Comments:
Move surface for pattern into subfile.

======================================================================
At Mon Jan 9 18:20:04 2012, the following review was posted:

Reviewer: Wesley
Certification: novote
Comments:
i'm unsure about these conditional lines
5 24 0 -1.85898 12.873 -4.99913 -1.85898 12.873 -10 -2 10 0 -2 15.746
5 24 -4.99913 -1.85898 12.873 -11.6448 -1.91599 12.873 -10 -2 10 -10 -2 15.746
5 24 -93.0048 -8.6166 12.873 -93.0466 -8.5845 12.873 -93.182 -8.355 11.466 -93.163 -8.315 14.892
5 24 4.99913 -1.85898 12.873 0 -1.85898 12.873 0 -2 10 10 -2 15.746
5 24 11.6448 -1.91599 12.873 4.99913 -1.85898 12.873 10 -2 10 10 -2 15.746
5 24 93.0466 -8.5845 12.873 93.0048 -8.6166 12.873 93.163 -8.315 10.854 93.182 -8.355 14.28

are they really needed?

======================================================================
At Mon Jan 9 18:50:03 2012, the following review was posted:

Reviewer: Philo
Certification: novote
Comments:
Yes, they trigger smooth shading in LDView between the two halves.

======================================================================
At Mon Jan 9 23:05:05 2012, the following review was posted:

Reviewer: Wesley
Certification: certify
Comments:
Ok, agree.

======================================================================
At Mon Jan 9 23:25:03 2012, the following review was posted:

Reviewer: MagFors
Certification: novote
Comments:
Missing edgelines beween subfiles.
See comment at 93250s01.dat

======================================================================
At Thu Aug 9 13:00:09 2012 a Parts Tracker Admin edited the header.
======================================================================
At Thu Nov 15 22:55:02 2012, a new version of the file was submitted.
Submitted by: Wesley
Comments:
there was no activity here a long time, so i fixed the subpart, added missing edgelines, and removed obsolete subpart reference.

@angmarec: i hope that was ok for you?


Existing certification-votes were deleted.
======================================================================
At Fri Nov 16 15:55:05 2012, the following review was posted:

Reviewer: mikeheide
Certification: novote
Comments:
@wesley

If a part is on hold for a long time you do not need to ask the original author.
If a part is not on hold you should not touch until you have the ok from the author.
That are our common rules that should be in the PT FAQ hopefully.

======================================================================
At Fri Nov 16 16:40:07 2012, the following review was posted:

Reviewer: Wesley
Certification: novote
Comments:
my fault, i oversaw that "on hold" addendum. wasn't my intention to offend against the rules.

i will restore original versions...

======================================================================
At Fri Nov 16 16:45:06 2012, a new version of the file was submitted.
Submitted by: Wesley
Comments:
this is original version, as i had no permission to improve. sorry for that.

Existing certification-votes were deleted.
======================================================================
At Fri Nov 16 17:00:05 2012, the following review was posted:

Reviewer: mikeheide
Certification: hold
Comments:
Missing edgelines beween subfiles.
See comment at 93250s01.dat

If the author do not correct this in time everybody is free to correct now as the file is currently on hold :)

======================================================================
At Sun Mar 10 13:00:07 2013, a new version of the file was submitted.
Submitted by: Wesley
Comments:
improved version again.

Existing certification-votes were deleted.
======================================================================
At Sun Mar 10 14:00:07 2013, the following review was posted:

Reviewer: mikeheide
Certification: hold
Comments:
Sorry, but the brackets for the author that you have used are reserved for special use {Wesley}, so please use [Wesley] only!

======================================================================
At Sun Mar 10 14:10:24 2013, a new version of the file was submitted.
Submitted by: Wesley
Existing certification-votes were deleted.
======================================================================
At Mon Sep 9 15:50:05 2013, the following review was posted:

Reviewer: MMR1988
Certification: hold
Comments:
Part number is wrong: It must be 93350s01.dat
What's the special "Mummy" thing here?
Description should optimized.
Due to the subparts there is an unwanted edge between the connector and the wing itself; Connector contains some t-junctions.

======================================================================
At Mon Sep 9 15:55:04 2013, the following review was posted:

Reviewer: MMR1988
Certification: hold
Comments:
Oups name must be 93350.dat without s01 extension of course.

======================================================================
At Mon Sep 9 16:10:03 2013, the following review was posted:

Reviewer: MMR1988
Certification: hold
Comments:
There seems to be something wrong at TLG.
The part is numbered 93250 in LDD and 93350 in the web catalog. I'll further investigate to get the right number.

======================================================================
At Tue Sep 10 15:00:05 2013, the following review was posted:

Reviewer: Philo
Certification: novote
Comments:
Funny coincidence... 93250 is the right mold number for this part. 93350 is the design number for patterned wing.

======================================================================
At Wed Sep 11 08:45:03 2013, the following review was posted:

Reviewer: MMR1988
Certification: hold
Comments:
Philo, you're right.
I got the same information. Now only the other points needs to be solved:
What's the special 'Mummy' thing here?
Description should optimized.
Due to the subparts there is an unwanted edge between the connector and the wing itself; Connector contains some t-junctions.

======================================================================
At Wed Sep 11 09:05:05 2013, the following review was posted:

Reviewer: Philo
Certification: certify
Comments:
Indeed, little to do with mummies... LEGO calls it Eagle Wing so maybe "Minifig Eagle Wing" like we already have a bat wing?
I can live with the minor flaws that can be fixed when someone copes with the patterned version.

======================================================================
At Wed Sep 11 10:00:05 2013, the following review was posted:

Reviewer: MMR1988
Certification: hold
Comments:
As the patterned version is on the PT, I'll fix it in the evening...

======================================================================
At Wed Sep 11 11:20:03 2013, the following review was posted:

Reviewer: Philo
Certification: novote
Comments:
I forgot it was already done!

======================================================================
At Wed Sep 11 16:30:06 2013, a new version of the file was submitted.
Submitted by: MMR1988
Existing certification-votes were deleted.
======================================================================
At Thu Sep 12 05:55:02 2013, the following review was posted:

Reviewer: arezey
Certification: novote
Comments:
This can be quite nitpicky because of the angle involved but there's some bleed-ins at the clip since the plane it connects to doesn't have a cut-out for it.

-DefaultMatrix=0.829736,-0.182289,0.527508,0.186504,0.981357,0.0457822,-0.526051,0.0603971,0.848278 -DefaultZoom=3.35193

======================================================================
At Thu Sep 12 07:45:03 2013, the following review was posted:

Reviewer: MMR1988
Certification: novote
Comments:
I can't see what you mean. Did you use the updated subfile?

======================================================================
At Thu Sep 12 08:25:02 2013, the following review was posted:

Reviewer: arezey
Certification: novote
Comments:
https://dl.dropboxusercontent.com/u/66055976/LDraw/93250-1.png

======================================================================
At Thu Sep 12 08:25:05 2013, the following review was posted:

Reviewer: arezey
Certification: hold
Comments:
upping to hold

======================================================================
At Thu Sep 12 09:15:06 2013, the following review was posted:

Reviewer: MMR1988
Certification: novote
Comments:
Thats not a bleed, I just forgot to add a condline there :-)

======================================================================
At Thu Sep 12 12:20:02 2013, the following review was posted:

Reviewer: arezey
Certification: novote
Comments:
Huh, looking further into wireframe it indeed isn't a bleed. Sorry about that.

======================================================================
At Thu Sep 12 13:25:02 2013, the following review was posted:

Reviewer: MMR1988
Certification: novote
Comments:
I checked again and again. The condline is present, but due to this very very small angle (ca. 1.15 degrees) it is possible to see the underside of the quads from the top of the subparts. I think of removing these angle completely now. What do you think?

======================================================================
At Thu Sep 12 14:00:06 2013, the following review was posted:

Reviewer: Philo
Certification: novote
Comments:
Weird problem... for sure it would help to make this area flat!

======================================================================
At Sat Oct 12 11:45:11 2013, a new version of the file was submitted.
Submitted by: MMR1988
Comments:
Hopefully all faults are fixed now.
I'll fix the patterned part soon.

Existing certification-votes were deleted.
======================================================================
At Sat Oct 12 16:05:04 2013, the following review was posted:

Reviewer: MagFors
Certification: certify
No comments were posted with this review.

======================================================================
At Sat Dec 13 12:10:00 2014, the following review was posted:

Reviewer: Steffen
Certification: certify
No comments were posted with this review.


© 2001-2014 LDraw.org, see Legal Info for details. This website is powered by Peeron.com.

LEGO® is a registered trademark of the LEGO Group, which does not sponsor, endorse, or authorize this site. Visit the official Lego website at http://www.lego.com/.
The LDraw system is a completely unofficial, community run free CAD system which represents official parts produced by the LEGO company.
The LDraw Parts Tracker is maintained and developed by voluntary members of the LDraw organisation.