Parts Tracker :: Parts List :: Activity :: Submit :: PT Tools :: PT Reference :: LDraw Specifications :: Lookup

Unofficial File parts/6644a.dat

Next File | Prev File | Download | Review | Edit | CA Header Edit | Events

part image

File Header:

0 Technic Flex System Ball Connector (open)
0 Name: 6644a.dat
0 Author: Miguel Agullo
0 !LDRAW_ORG Unofficial_Part
0 !LICENSE Redistributable under CCAL version 2.0 : see CAreadme.txt

0 BFC CERTIFY CW

0 !HISTORY 2007-11-02 [mikeheide] fixed outer ring edges

0 Mods: R.Crawford, tidied up, fix orientation, BFC

Status:
1 'hold' vote. (HX)
Size: 19030 bytes

Reviewers' certifications:

Steffen=hold

Required (unofficial) subfiles:
(none)

Related (unofficial) files:
(none)

File reviews and updates:

At Fri Aug 2 23:32:05 2002, the file was initially submitted.
Submitted by: rosco
======================================================================
At Tue Aug 6 20:34:03 2002, the following review was posted:

Reviewer: Philo
Certification: hold
Comments:
- See x345
- The 1-4con2 primitives (cable attachment), seen from inside, should receive a BFC INVERTNEXT to prevent bad orientation when this primitive is BFC certified

======================================================================
At Mon Aug 12 13:49:29 2002 part 'parts/x345a.dat' was renamed to 'parts/6644a.dat'.
======================================================================
At Thu Aug 15 09:26:06 2002, a new version of the file was submitted.
Submitted by: rosco
Comments:
fixed incorrect quad
added BFC INVERTNEXT to cone primitives

Existing certification-votes were deleted.
======================================================================
At Fri Sep 6 17:52:03 2002, the following review was posted:

Reviewer: OrionP
Certification: certify
No comments were posted with this review.

======================================================================
At Tue Oct 1 03:54:03 2002, the following review was posted:

Reviewer: technog
Certification: novote
Comments:
This part looks good but I question the need for an open version of this part?

======================================================================
At Wed Oct 30 19:44:03 2002, the following review was posted:

Reviewer: jvan
Certification: certify
No comments were posted with this review.

======================================================================
At Thu Jan 16 00:30:04 2003, the following review was posted:

Reviewer: technog
Certification: hold
Comments:
I have taken another more thorough look at this part and found numerous errors - to many to list here.
I'll forward an email to the author with my suggestions.

======================================================================
At Fri Sep 10 07:32:03 2004, the following review was posted:

Reviewer: rosco
Certification: novote
Comments:
I have not received your email, please list them here so I can fix the part, or feel free to fix them yourself.

======================================================================
At Wed Oct 27 18:42:00 2004, the following review was posted:

Reviewer: sbliss
Certification: hold
Comments:
Please rotate this part so the 'cable' hole is facing along the -Z axis, and the part is lying flat -- that is, so the open face is upward, and the claspe is on the +X side. In other words, rotate 90 degrees counterclockwise around the Y axis, then rotate 90 clockwise around the Z axis.

======================================================================
At Thu Oct 28 21:26:03 2004, a new version of the file was submitted.
Submitted by: rosco
Comments:
Fix orientation and some BFC errors

Existing certification-votes were deleted.
======================================================================
At Thu Jul 13 16:46:02 2006, the following review was posted:

Reviewer: WilliamH
Certification: novote
Comments:
The open form of this part is useful for parts lists (BOMs) when creating instructions

======================================================================
At Thu Jul 13 16:54:05 2006, the following review was posted:

Reviewer: WilliamH
Certification: hold
Comments:
2-4ndis's overlap ring4's (and quads in this area)

outer 4-4edge's and 4-4cyli should be replace by 2-4 versions and remaining gaps correctly closed with quads and lines

======================================================================
At Sun Jul 16 19:46:02 2006, the following review was posted:

Reviewer: WilliamH
Certification: novote
No comments were posted with this review.

======================================================================
At Fri Nov 2 16:46:02 2007, a new version of the file was submitted.
Submitted by: mikeheide
Existing certification-votes were deleted.
======================================================================
At Tue Nov 30 19:20:05 2010, the following review was posted:

Reviewer: Steffen
Certification: hold
Comments:
- edgelines missing when you peek into the bottom rectangular hole
- edgelines missing when you peek into the bottom circular hole
- I'd like to hear some opinions about part numbering 6644.dat vs. 6644a.dat - what do you think?

======================================================================
At Tue Nov 30 19:25:02 2010, the following review was posted:

Reviewer: Steffen
Certification: hold
Comments:
additionally, the edgelines on the top surface (at the top arch) don't meet properly

======================================================================
At Sun May 22 23:25:02 2011, the following review was posted:

Reviewer: Steffen
Certification: hold
Comments:
additionally, the numbering needs tidying up
(6644.dat vs. 6644a.dat)

======================================================================
At Sat Jul 30 02:20:05 2011, the following review was posted:

Reviewer: Steffen
Certification: hold
Comments:
additionally, the line
0 Mods:
should be converted into a normal
0 !HISTORY
line


© 2001-2014 LDraw.org, see Legal Info for details. This website is powered by Peeron.com.

LEGO® is a registered trademark of the LEGO Group, which does not sponsor, endorse, or authorize this site. Visit the official Lego website at http://www.lego.com/.
The LDraw system is a completely unofficial, community run free CAD system which represents official parts produced by the LEGO company.
The LDraw Parts Tracker is maintained and developed by voluntary members of the LDraw organisation.