Parts Tracker :: Parts List :: Activity :: Submit :: PT Tools :: PT Reference :: LDraw Specifications :: Lookup

Unofficial File parts/54802.dat

Next File | Prev File | Download | Review | Edit | CA Header Edit | Events

part image

File Header:

0 Motor Inertia Flywheel  4 x  9 x  3.667
0 Name: 54802.dat
0 Author: Carlos Arbesu [NXTbesu]
0 !LDRAW_ORG Unofficial_Shortcut
0 !LICENSE Redistributable under CCAL version 2.0 : see CAreadme.txt

0 BFC CERTIFY CCW

0 !CATEGORY Vehicle

0 !HISTORY 2007-09-17 [NXTbesu] BFC errors fixed
0 !HISTORY 2007-09-23 [NXTbesu] Extra cleaning and better use of subparts
0 !HISTORY 2009-05-25 [NXTbesu] Subpart Filenames and filename changed
0 !HISTORY 2009-05-31 [NXTbesu] Some simplification, Rectifier'ed & Axlehol2'ed
0 !HISTORY 2012-11-19 [MagFors] Moved content to separate parts, housing and axle

Status:
1 subfile isn't certified. (CCSX)
Size: 692 bytes

Reviewers' certifications:

Steffen=certify
mikeheide=certify

Required (unofficial) subfiles:

parts/u9071.dat

~Motor Inertia Flywheel 4 x 9 x 3.667 Housing (Needs Work)

1 subfile isn't certified. (SX)

Events

Related (unofficial) files:
(none)

File reviews and updates:

At Mon May 25 21:18:01 2009, the file was initially submitted.
Submitted by: NXTbesu
Comments:
Old "parts/54802cx1.dat" renamed to "parts/54802c01.dat"

======================================================================
At Tue May 26 05:44:02 2009, the following review was posted:

Reviewer: arezey
Certification: novote
Comments:
Good, although usually renames are done by admins renumbering parts..

======================================================================
At Wed May 27 07:56:01 2009, the following review was posted:

Reviewer: arezey
Certification: hold
Comments:
License not specified.
Run this through DATHeader to get the header correct in one shot.

======================================================================
At Wed May 27 07:58:01 2009, the following review was posted:

Reviewer: arezey
Certification: hold
Comments:
Holding only for above reason, but I'm quite sure the axle should be Translucent-White (colour 79) for the axle.

Also you should use axlehol2.dat for the edgelines of the axlehole instead of manually specifying them.

Perhaps also run this through Rectifier to optimize part?

======================================================================
At Mon Jun 1 05:42:01 2009, the following review was posted:

Reviewer: cwdee
Certification: novote
Comments:
Header fixed by admin edit.

======================================================================
At Mon Jun 1 06:10:03 2009, the following review was posted:

Reviewer: arezey
Certification: novote
No comments were posted with this review.

======================================================================
At Mon Jun 1 07:20:16 2009, the following review was posted:

Reviewer: arezey
Certification: hold
Comments:
Orientation mismatch with other motor parts: 2894c01.dat, 2894c01.dat, 43560c01.dat, 32283.dat, 42288.dat and x796c01.dat

======================================================================
At Mon Jun 1 22:24:05 2009, a new version of the file was submitted.
Submitted by: NXTbesu
Comments:
Axle changed to color 79.
File rectifier'ed and DATHeader'ed.
Use of axlehol2 primitive now to simplify file.
Some subassemblies moved to subpart files.
Please discard old subpart files and reload new one before donwload/use this file.
Trying to change orientation to match similar parts but not sure if correct. Please advise.

Existing certification-votes were deleted.
======================================================================
At Tue Jun 2 08:06:02 2009, the following review was posted:

Reviewer: arezey
Certification: novote
Comments:
Orientation is good.
Could use stug2a.dat and stug4a.dat primitives.
The first few rectangles could be replaced with a single box5-4a.dat primitive.

======================================================================
At Tue Jun 2 08:08:02 2009, the following review was posted:

Reviewer: arezey
Certification: novote
Comments:
Oh, and with White Axleholes could be removed from title. They all have white axleholes, don't they? (and it's not really White, but Translucent-White anyway..) ;-)

======================================================================
At Sat Jul 4 07:06:01 2009, the following review was posted:

Reviewer: arezey
Certification: novote
Comments:
Here, too: !LDRAW_ORG line should be !LDRAW_ORG Unofficial_Part. Also, !CATEGORY is unneeded as the category defaults to the first word of the part title, if omitted.

======================================================================
At Sat Jul 4 07:16:00 2009, the following review was posted:

Reviewer: arezey
Certification: novote
Comments:
One more little thing: "2.1/3" should be "2 & 1/3"

======================================================================
At Sat Oct 10 08:04:05 2009, the following review was posted:

Reviewer: arezey
Certification: certify
Comments:
Well, it does go like this and admin can fix header on release.

======================================================================
At Sat Jun 4 11:15:11 2011, the following review was posted:

Reviewer: Steffen
Certification: hold
Comments:
contains stray
0 BFC CERTIFY CW

======================================================================
At Sun Jan 15 17:15:05 2012 a Parts Tracker Admin edited the header.
======================================================================
At Wed Feb 29 23:00:06 2012, the following review was posted:

Reviewer: Steffen
Certification: hold
Comments:
error still present

======================================================================
At Tue Nov 13 18:35:01 2012, a new version of the file was submitted.
Submitted by: mikeheide
Comments:
Corrected BFC CERTIFY CW line.

Existing certification-votes were deleted.
======================================================================
At Tue Nov 13 18:45:05 2012, a new version of the file was submitted.
Submitted by: mikeheide
Comments:
I had nearly forgotten how easy change of winding is with DATHeader.
So now the unnecessary 0 BFC CW line has been deleted.

======================================================================
At Wed Nov 14 23:10:02 2012, the following review was posted:

Reviewer: Steffen
Certification: hold
Comments:
if this is a XXXc01, then there must be a XXX part IMHO.
this actually should be changed to being a shortcut which composes
the main part body with the white axlehole.

======================================================================
At Mon Nov 19 19:20:03 2012, the following review was posted:

Reviewer: MagFors
Certification: novote
Comments:
I've split this into two parts, Axle and Housing.

Do we know the correct numbers or shouls I use two u9??? numbers.

Should this file be renumberd to only 54802?

IMO, the name should be "Motor Flywheel 4 x 9 x 2.333"
Nearly all the other have been renamed, and don't use "Technic ..."

It could use the new splitted studs to, stud4sl and stud4sp.


======================================================================
At Tue Nov 20 08:25:03 2012, the following review was posted:

Reviewer: Philo
Certification: novote
Comments:
54802 is the whole assembly. According to LEGO replacements parts:
"FLYWHEEL 4X8X3 2/3 VER.1
Color Family: Black
Exact Color: BLACK
Category: Functional Elements
Element ID: 4285905
Design ID: 54802"
Image: http://cache.lego.com/media/bricks/5/2/4285905.jpg

54800 and 54801 are related to it, 54801 beeing a gear and 54800 the flywheel itself???.

======================================================================
At Tue Nov 20 11:40:02 2012, the following review was posted:

Reviewer: anathema
Certification: novote
Comments:
I prefer the 'Inertia' qualifier used by BrickLink: http://www.bricklink.com/catalogList.asp?q=flywheel

Just calling this a 'Motor' rather implies that it's electric, which is obviously not the case.

======================================================================
At Sat Dec 15 17:20:07 2012, a new version of the file was submitted.
Submitted by: MagFors
Comments:
This file should be renumbered to 54802 when the housing has been renumbered.
I've sent a request to Admin.

Description changed from:
"Technic Motor Flywheel 4 x 9 x 2.333 with White Axleholes"
to
"Motor Inertia Flywheel 4 x 9 x 3.667"


Existing certification-votes were deleted.
======================================================================
At Wed Dec 26 07:16:39 2012 part 'parts/54802c01.dat' was renamed to 'parts/54802.dat'.
======================================================================
At Sat Dec 29 22:25:13 2012, the following review was posted:

Reviewer: Steffen
Certification: certify
No comments were posted with this review.

======================================================================
At Fri Mar 15 20:05:02 2013, the following review was posted:

Reviewer: mikeheide
Certification: certify
No comments were posted with this review.


© 2001-2014 LDraw.org, see Legal Info for details. This website is powered by Peeron.com.

LEGO® is a registered trademark of the LEGO Group, which does not sponsor, endorse, or authorize this site. Visit the official Lego website at http://www.lego.com/.
The LDraw system is a completely unofficial, community run free CAD system which represents official parts produced by the LEGO company.
The LDraw Parts Tracker is maintained and developed by voluntary members of the LDraw organisation.