Parts Tracker :: Parts List :: Activity :: Submit :: PT Tools :: PT Reference :: LDraw Specifications :: Lookup

Unofficial File parts/3843.dat

Next File | Prev File | Download | Review | Edit | CA Header Edit | Events

part image

File Header:

0 Minifig Helmet Visor with Grille and Feather
0 Name: 3843.dat
0 Author: Paul Easter [pneaster]
0 !LDRAW_ORG Unofficial_Part
0 !LICENSE Redistributable under CCAL version 2.0 : see CAreadme.txt

0 BFC CERTIFY CW

0 !CATEGORY Minifig Headwear
0 !KEYWORDS knight, castle, mask, slot

0 // (The comments may be removed by the ADMIN during the ADMIN approval)
0 // This part must be set 5.0 LDU below the placement of the helmet/head. This
0 // does NOT line up with the current 193 helmets because they are not correct.
0 // The pivot location has been verified using dial calipers, The pivot it 0.5 LDU
0 // too low.
0 // The accuracy of this part was originally created within the nearest 0.25 LDU.
0 // Some modifications have been made to satisfy parts reviewers which may make
0 // changes as large a 1.5 LDU.
0 // The vision slot had been moved down, but after rechecking this with real parts,
0 // It was moved back up where it belongs.

0 // "feather" pieces across center

Status:
Needs more votes. (X)
Size: 45868 bytes

Reviewers' certifications:

Steffen=novote

Required (unofficial) subfiles:

p/48/1-8ring10.dat

Hi-Res Ring 10 x 0.125

Certified! (ACCX)

Events

Related (unofficial) files:
(none)

File reviews and updates:

At Wed Jul 23 06:00:03 2003, the file was initially submitted.
Submitted by: pneaster
Comments:
Still in process, needed to check dependencies.

======================================================================
At Wed Jul 23 14:00:03 2003, the following review was posted:

Reviewer: pneaster
Certification: hold
Comments:
Do not check yet, still missing some lines and conditinal lines. Origin might need to move.

======================================================================
At Fri Jul 25 04:00:03 2003, a new version of the file was submitted.
Submitted by: pneaster
Comments:
Lines added, give it the three times over.

Existing certification-votes were deleted.
======================================================================
At Fri Jul 25 08:00:06 2003, the following review was posted:

Reviewer: Steffen
Certification: hold
Comments:
No BFC errors, no L3P errors, no missing lines spotted.
Marvellous work!

I question the origin: when I add a minifig head to this part,
it cannot look through the slot - dangerous for a knight, I guess.
You can tell me that this is correct when using this part
with the appropriate helmet and I'll agree.

Uhm, Paul? Small critics: have a look at this part when
rendered with POVRay. Can something be done about that "quaddiness"
at the top? Perhaps adding some sheared cylinder segments instead
of quads?

Syntax error in category and keywords: HOLD

======================================================================
At Fri Jul 25 12:00:07 2003, the following review was posted:

Reviewer: OrionP
Certification: hold
Comments:
There are several problems with this part:

- The origin should be changed so that it is plugin compatible with 193.dat (just like 2446 and 2447)

- When placed on part 193.dat and the nubs lined up, a standard smily head's eyes should line up with the visor slot. Thay don't with this part.

- This part should fit tighter against part 193.dat. Right now it seems to be a little too wide.

======================================================================
At Fri Jul 25 23:00:03 2003, the following review was posted:

Reviewer: BrickCaster
Certification: novote
Comments:
Many thanks Paul, this part is close to our castle-fan hearts.

Note about the helmet: 193.dat is "the appropriate helmet".
No other helmet can hold this visor.

======================================================================
At Sun Jul 27 22:00:04 2003, the following review was posted:

Reviewer: BrickCaster
Certification: certify
Comments:
BFC ok. Origin ok. Orientation ok.
I also use large zoom when reviewing and I confirm previous comments.
My opinion is you should not change the origin (i would not obstruct if you do), otherwise the part rotation would be cumbersome.


======================================================================
At Mon Jul 28 00:00:06 2003, a new version of the file was submitted.
Submitted by: Steffen
Comments:
fixed keyword syntax error:
"Category:" --> "CATEGORY"
"Keywords:" --> "KEYWORDS"

Existing certification-votes were deleted.
======================================================================
At Mon Jul 28 01:00:02 2003, the following review was posted:

Reviewer: OrionP
Certification: hold
Comments:
Reinstating my hold vote. See above comments

======================================================================
At Mon Jul 28 15:00:06 2003, the following review was posted:

Reviewer: pneaster
Certification: hold
Comments:
Steffen, your patience need some work.

======================================================================
At Wed Oct 22 22:48:01 2003, the following review was posted:

Reviewer: fwcain
Certification: novote
No comments were posted with this review.

======================================================================
At Fri Nov 21 15:50:04 2003, the following review was posted:

Reviewer: westrate
Certification: novote
No comments were posted with this review.

======================================================================
At Sun Dec 7 20:10:12 2003, a new version of the file was submitted.
Submitted by: pneaster
Existing certification-votes were deleted.
======================================================================
At Mon Dec 8 15:02:06 2003, the following review was posted:

Reviewer: fwcain
Certification: novote
No comments were posted with this review.

======================================================================
At Sat Jul 10 03:46:01 2004, the following review was posted:

Reviewer: Quintesson
Certification: certify
Comments:
My only complaint would be the name. It tends to imply that you may be refering to one helmet, as opposed to the oldest of two.

======================================================================
At Mon Jul 12 00:20:02 2004, the following review was posted:

Reviewer: pneaster
Certification: novote
Comments:
I am not maintaining this part any longer. Please let others know here if you are planning on altering this file.

======================================================================
At Fri Jan 27 18:58:02 2006, the following review was posted:

Reviewer: mikeheide
Certification: certify
No comments were posted with this review.

======================================================================
At Fri Mar 2 05:48:31 2007 part 'parts/x523.dat' was renamed to 'parts/3843.dat'.
======================================================================
At Thu Nov 4 22:00:07 2010, the following review was posted:

Reviewer: Steffen
Certification: novote
Comments:
file contains minor typo "accuraccy"

======================================================================
At Sat Jun 4 11:10:02 2011, the following review was posted:

Reviewer: Steffen
Certification: hold
Comments:
contains stray
0 BFC CERTIFY CCW
plus inlining relicts

======================================================================
At Mon Jul 4 20:30:09 2011, the following review was posted:

Reviewer: Steffen
Certification: hold
Comments:
additionally, file is using a mix of old and new header syntax

======================================================================
At Mon Jul 4 20:50:09 2011, a new version of the file was submitted.
Submitted by: mikeheide
Comments:
Corrected BFC line. Updated header format.

Existing certification-votes were deleted.
======================================================================
At Sat Jul 30 01:35:02 2011, the following review was posted:

Reviewer: Steffen
Certification: hold
Comments:
invalid category

======================================================================
At Sat Dec 10 21:10:06 2011, a new version of the file was submitted.
Submitted by: MagFors
Comments:
Removed Category.


Existing certification-votes were deleted.
======================================================================
At Sat Dec 10 21:15:12 2011, a new version of the file was submitted.
Submitted by: Steffen
Comments:
corrected typo "accuraccy"

======================================================================
At Thu Aug 9 13:15:10 2012 a Parts Tracker Admin edited the header.
======================================================================
At Wed Apr 23 14:35:03 2014, the following review was posted:

Reviewer: Steffen
Certification: novote
Comments:
"0 // (The comments may be removed by the ADMIN during the ADMIN approval)"

using notes this way is a bad practice IMHO.

the admin should only do trivial, minor corrections
and not real file editing during his review.
otherwise the file seen by the normal reviewers differs too much
from the one the Admin sees. IMHO.


© 2001-2014 LDraw.org, see Legal Info for details. This website is powered by Peeron.com.

LEGO® is a registered trademark of the LEGO Group, which does not sponsor, endorse, or authorize this site. Visit the official Lego website at http://www.lego.com/.
The LDraw system is a completely unofficial, community run free CAD system which represents official parts produced by the LEGO company.
The LDraw Parts Tracker is maintained and developed by voluntary members of the LDraw organisation.