Parts Tracker :: Parts List :: Activity :: Submit :: PT Tools :: PT Reference :: LDraw Specifications :: Lookup

Unofficial File parts/32305.dat

Next File | Prev File | Download | Review | Edit | CA Header Edit | Events

part image

File Header:

0 Technic Connector Block  7 x  4 x  3
0 Name: 32305.dat
0 Author: Robert Sexton [rhsexton]
0 !LDRAW_ORG Unofficial_Part
0 !LICENSE Redistributable under CCAL version 2.0 : see CAreadme.txt

0 BFC CERTIFY CCW

0 !HISTORY 2007-03-25 [mikeheide] added missing two lines
0 !HISTORY 2007-06-21 [mikeheide] fixed several errors
0 !HISTORY 2007-08-08 [mikeheide] fixed 4 missing lines, and holes in surface
0 !HISTORY 2007-08-09 [mikeheide] fixed floating cond. line
0 !HISTORY 2010-07-25 [rhsexton] broke piece down into sub-parts, replaced many quads, triangles and lines with primitives
0 !HISTORY 2014-11-22 [MagFors] Made BFC compliant, inlined subfile


Status:
1 subfile isn't certified. (SX)
Size: 6651 bytes

Reviewers' certifications:
(no current reviews for this file)

Required (unofficial) subfiles:

parts/s/32305s01.dat

~Technic Connector Block 7 x 4 x 3 Half

Needs more votes. (X)

Events

Related (unofficial) files:
(none)

File reviews and updates:

At Fri Nov 16 21:12:01 2001, the file was initially submitted.
======================================================================
At Tue Feb 12 13:22:01 2002, the following review was posted:

Reviewer: cschmitz
Certification: hold
Comments:
Amazing part too!!! wow!

-There are two open boxes at the top of the diagonal part at the rounded end. Check with LDView.
-Check with L3P. There are a lot of errors including identical vertices.

======================================================================
At Sat Dec 14 21:12:04 2002, a new version of the file was submitted.
Submitted by: Valemar
Comments:
found the open spots on the part and corrected them.
having problems running l3p on my computer. please advise as to how to clear up the errors and identical vertices.


Existing certification-votes were deleted.
======================================================================
At Sat Dec 14 21:32:05 2002, a new version of the file was submitted.
Submitted by: Valemar
Comments:
Resubmit
changed author name
corrected open areas
need advised on correcting identical verticies


======================================================================
At Sun Dec 15 02:06:03 2002, the following review was posted:

Reviewer: OrionP
Certification: novote
Comments:
Use the File Check utility under PT Tools. It's the same as L3P -check

======================================================================
At Tue Dec 24 01:40:05 2002, a new version of the file was submitted.
Submitted by: Valemar
Comments:
corrected all errors

Existing certification-votes were deleted.
======================================================================
At Wed Sep 10 08:42:01 2003, the following review was posted:

Reviewer: mkennedy
Certification: novote
Comments:
I would split this part around the mirrored axis to save space.


======================================================================
At Wed Feb 25 00:20:02 2004, the following review was posted:

Reviewer: fwcain
Certification: certify
Comments:
Nice job, sir. ;)


======================================================================
At Thu Apr 29 22:28:05 2004, the following review was posted:

Reviewer: Steffen
Certification: hold
Comments:
Whoah. What a baby. Sorry to hold: these quads are each missing an edge
4 16 20 50 20 30 50 20 30 50 -10 20 50 -10
4 16 -20 50 20 -30 50 20 -30 50 -10 -20 50 -10


======================================================================
At Sun Mar 25 18:52:41 2007, a new version of the file was submitted.
Submitted by: mikeheide
Comments:
Added that two missing lines.

Existing certification-votes were deleted.
======================================================================
At Mon Mar 26 11:50:07 2007, the following review was posted:

Reviewer: Philo
Certification: hold
Comments:
Impressive piece indeed!
But several missing quads, lines, condlines, and header to be updated.
See http://www.brickshelf.com/gallery/Philo/Misc/32305/32305-1.png up to http://www.brickshelf.com/gallery/Philo/Misc/32305/32305-6.png


======================================================================
At Fri Jun 22 21:08:02 2007, a new version of the file was submitted.
Submitted by: mikeheide
Comments:
Correct errors showing in the pictures from Philo.

Existing certification-votes were deleted.
======================================================================
At Mon Jun 25 18:22:06 2007, the following review was posted:

Reviewer: Philo
Certification: hold
Comments:
Still a few little problems...
- 2 missing lines and one "floating" condline... http://www.brickshelf.com/gallery/Philo/Misc/32305/32305-6.png
- ...that is missing here http://www.brickshelf.com/gallery/Philo/Misc/32305/32305-7.png
- Two missing lines and two holes in the surface: http://www.brickshelf.com/gallery/Philo/Misc/32305/32305-8.png

======================================================================
At Wed Aug 8 19:14:07 2007, a new version of the file was submitted.
Submitted by: mikeheide
Comments:
I could not find the flowting cond. line! Other errors should be fixed.

Existing certification-votes were deleted.
======================================================================
At Thu Aug 9 06:34:02 2007, the following review was posted:

Reviewer: Philo
Certification: novote
Comments:
Looks like it is located line 1932... to be confirmed!

======================================================================
At Thu Aug 9 16:28:02 2007, a new version of the file was submitted.
Submitted by: mikeheide
Comments:
You where right! It is fixed now.

Existing certification-votes were deleted.
======================================================================
At Fri Aug 17 11:50:05 2007, the following review was posted:

Reviewer: Philo
Certification: certify
Comments:
I can still spot a few "approximations", but it is quite good nonetheless :-P

======================================================================
At Sat Jan 23 18:38:51 2010, the following review was posted:

Reviewer: mikeheide
Certification: hold
Comments:
Robert Sexton has not affirmed the CA

======================================================================
At Sat Jul 17 21:05:01 2010, the following review was posted:

Reviewer: cwdee
Certification: novote
Comments:
Robert Sexton as [rhsexton] has now affirmed the CA.

======================================================================
At Sun Jul 25 06:45:07 2010, a new version of the file was submitted.
Submitted by: rhsexton
Comments:
Full replacement for 32305. This final piece is broken up into two sub-parts. I've done my best to replace as many quads, triangles and lines with primitives (from the p\ folder) and thus making even the sub-parts smaller too.

Let me know if any corrections are needed.

Existing certification-votes were deleted.
======================================================================
At Tue Nov 18 19:05:00 2014, a new version of the file was submitted.
Submitted by: MagFors
Comments:
Made it fully BFC compliant.
Removed many overlapping surfaces.
Added missing edge lines.
Removed some, but not all, t-junctions.


======================================================================
At Tue Nov 18 20:05:00 2014, the following review was posted:

Reviewer: mikeheide
Certification: certify
Comments:
Let us get this baby out now please. If there are any faults left, we should address that later IMHO

======================================================================
At Tue Nov 18 21:30:01 2014, the following review was posted:

Reviewer: MMR1988
Certification: novote
Comments:
I would like to see the s02 subpart inlined in the main part, cause I don't know a reason for having a separate file for these lines...

======================================================================
At Tue Nov 18 21:55:00 2014, the following review was posted:

Reviewer: MagFors
Certification: novote
Comments:
Yes, there's a lot of strange design solutions in here.
I dont have the part, and I don't know why it is split like it is.
Are there versions of this part? Maybe a common subpart for more parts?
Is Robert still active as an author?

======================================================================
At Wed Nov 19 03:35:01 2014, the following review was posted:

Reviewer: arezey
Certification: novote
Comments:
I don't think there are any, and Robert's parts have had subparts with only one use that had to get inlined down. So I'd suggest inlining it.

======================================================================
At Sat Nov 22 10:25:01 2014, a new version of the file was submitted.
Submitted by: MagFors
Comments:
Fixed.

Existing certification-votes were deleted.

© 2001-2014 LDraw.org, see Legal Info for details. This website is powered by Peeron.com.

LEGO® is a registered trademark of the LEGO Group, which does not sponsor, endorse, or authorize this site. Visit the official Lego website at http://www.lego.com/.
The LDraw system is a completely unofficial, community run free CAD system which represents official parts produced by the LEGO company.
The LDraw Parts Tracker is maintained and developed by voluntary members of the LDraw organisation.