Parts Tracker :: Parts List :: Activity :: Submit :: PT Tools :: PT Reference :: LDraw Specifications :: Lookup

Unofficial File parts/30561.dat

Next File | Prev File | Download | Review | Edit | CA Header Edit | Events

part image

File Header:

0 Minifig Helmet SW Royal Guard
0 Name: 30561.dat
0 Author: Stan Isachenko [angmarec]
0 !LDRAW_ORG Unofficial_Part
0 !LICENSE Redistributable under CCAL version 2.0 : see CAreadme.txt

0 BFC CERTIFY CCW

0 !CATEGORY Minifig Headwear
0 !KEYWORDS Star Wars

0 !HISTORY 2011-10-26 {LEGO Digital Designer} Original part shape
0 !HISTORY 2011-10-26 [angmarec] File preparation for LDraw Parts Tracker

Status:
Needs more votes. (X)
Size: 589 bytes

Reviewers' certifications:

BlackBrick89=novote

Required (unofficial) subfiles:
(none)

Related (unofficial) files:
(none)

File reviews and updates:

At Sun Sep 4 16:40:06 2011, the file was initially submitted.
Submitted by: angmarec
Comments:
Converted from LDD. This part needs a lot of work.
1. I think there should be stud at the top. But I don't have real part to compare.
2. Some places are still sharp after edger2.
3. I don't know where should be origin, so I set it closely to the top of the part.
If you now how to do it you can rework it.

======================================================================
At Sun Sep 4 17:40:08 2011, the following review was posted:

Reviewer: simlego
Certification: hold
Comments:
I think it should be translated into this matrix:
1 16 0 -14 0 0 0 1 0 1 0 -1 0 0 30561.dat

The problem is that it still goes onto the top front edges (the clavicel area?) of the torso.

I don't have this part, but I can guess that it may be a bit flexible so it's able to bend away from the front of the torso when in place on a minifig(?)

======================================================================
At Sun Sep 4 20:05:05 2011, the following review was posted:

Reviewer: mikeheide
Certification: hold
Comments:
BFC not set.
Line 45: Colinear vertices found. 3 16 -14.29 11.192 -0.083 -16.46 23.206 2.297 -14.29 11.197 -0.083
Line 367: Colinear vertices found. 3 16 -14.29 11.192 -0.083 -14.29 11.197 -0.083 -16.46 23.205 -2.473

======================================================================
At Wed Sep 7 22:25:04 2011, the following review was posted:

Reviewer: MagFors
Certification: novote
Comments:
Would this be OK? Tilted 4 degrees backwards.

1 14 0 0 0 1 0 0 0 1 0 0 0 1 3626bp01.dat
0 1 47 0 -13.792 0 0 0 1 0 1 0 -1 0 0 30561.dat
1 47 0 -13.758 0.962 0 0 1 -0.0697565 0.997564 0 -0.997564 -0.0697565 0 30561.dat
1 4 0 24 0 1 0 0 0 1 0 0 0 1 973.dat



======================================================================
At Thu Oct 20 07:05:04 2011, the following review was posted:

Reviewer: Philo
Certification: novote
Comments:
Stan, have you seen this: http://forums.ldraw.org/read.php?19,1117,1117#msg-1117 ?

Otherwise, when you say "2. Some places are still sharp after edger2. "
You may adjust thresholds between condlines and edgelines to have a better result (parameters -ac and -ae).

Extracted from documentation:

-ac parameter specifies the maximum angle below wich Edger2 creates conditional lines. Here we set -ac to 20 degrees, so sections junction (that have an angle of about 30 degrees) are in the "no mans land" between conditional lines and edge lines. They get both an edge line AND a conditional line. They are both colored in green for easy spotting: the user will have to manually suppress one of them. In the resulting LDraw file, the edge line is followed by the conditional line. This mode is useful to fine tune 3D files such as LDraw files received from LEGO Universe Team

======================================================================
At Mon Oct 24 17:30:08 2011, a new version of the file was submitted.
Submitted by: angmarec
Existing certification-votes were deleted.
======================================================================
At Mon Oct 24 18:00:11 2011, the following review was posted:

Reviewer: mikeheide
Certification: novote
Comments:
As this file has only references and linetype 5 lines it can be BFC'ed by adding the appropiate line.
Also I think this file needs to be shifted in the y-axis by 4 ldu to have the eyes correctly.

======================================================================
At Wed Oct 26 19:25:05 2011, a new version of the file was submitted.
Submitted by: angmarec
Comments:
Corrected orientation

Existing certification-votes were deleted.
======================================================================
At Wed Oct 26 19:30:06 2011, a new version of the file was submitted.
Submitted by: angmarec
======================================================================
At Wed Oct 26 19:45:04 2011, the following review was posted:

Reviewer: mikeheide
Certification: novote
Comments:
Wrong history line:
[Stan Isachenko [angmarec]]
should be only [angmarec]

======================================================================
At Wed Oct 26 19:50:06 2011, a new version of the file was submitted.
Submitted by: angmarec
Existing certification-votes were deleted.
======================================================================
At Wed Oct 26 21:15:05 2011, the following review was posted:

Reviewer: MagFors
Certification: hold
Comments:
1.)
Origin is still wrong. Should be moved in y-direction.
2.)
Partname is wrong. Please remove "Headgear"
There are six words to use. Cap, Hair, Helmet, Hat, Hood or Headdress.
Never Headgear.


======================================================================
At Wed Oct 26 21:55:07 2011, a new version of the file was submitted.
Submitted by: angmarec
Comments:
I change name, but I think no origin is right.

Existing certification-votes were deleted.
======================================================================
At Sat May 5 08:35:01 2012, the following review was posted:

Reviewer: BlackBrick89
Certification: novote
Comments:
We should add a "Needs Work" description which sais that the subfile intersects with the minifig torso.

======================================================================
At Thu Aug 9 12:45:09 2012 a Parts Tracker Admin edited the header.

© 2001-2014 LDraw.org, see Legal Info for details. This website is powered by Peeron.com.

LEGO® is a registered trademark of the LEGO Group, which does not sponsor, endorse, or authorize this site. Visit the official Lego website at http://www.lego.com/.
The LDraw system is a completely unofficial, community run free CAD system which represents official parts produced by the LEGO company.
The LDraw Parts Tracker is maintained and developed by voluntary members of the LDraw organisation.