Parts Tracker :: Parts List :: Activity :: Submit :: PT Tools :: PT Reference :: LDraw Specifications :: Lookup

Unofficial File parts/2594.dat

Next File | Prev File | Download | Review | Edit | CA Header Edit | Events

part image

File Header:

0 Minifig Helmet Visor Castle
0 Name: 2594.dat
0 Author: Richard Baxter [richardbrucebaxter]
0 !LDRAW_ORG Unofficial_Part
0 !LICENSE Redistributable under CCAL version 2.0 : see CAreadme.txt

0 BFC CERTIFY CW

0 !CATEGORY Minifig Headwear
0 !KEYWORDS knight

0 !HISTORY 2014-01-04 [mikeheide] with WINDZ for BFC compliance

0 // Build: 02/October/2010a

Status:
2 'hold' votes. (HHX)
Size: 66201 bytes

Reviewers' certifications:

MagFors=hold
Steffen=hold
mikeheide=novote

Required (unofficial) subfiles:
(none)

Related (unofficial) files:
(none)

File reviews and updates:

At Fri Jan 28 10:32:01 2005, the file was initially submitted.
Submitted by: rbaxter
Comments:
This part is not complete but has some design issues which I need help addressing. Minifig Castle Visor.dat requires 2 new primitives (1-5RING5.DAT, and 1-5CYLI.DAT) both of which do not display properly in LDView or Pov-Ray. That is the major design issue I am currently facing. It should be obvious which areas of the part are incomplete but the main areas being

1. the inside is not finished, it is quite complex to model and will take some time

2. there is probably a major lack of polygons especially in the nose area

3. there are some scale issues. Some are resolvable, others, for example the huge discrepancy between the size of the 'inside visor' and the 'outside visor' (explained below) are less simplistic and I would appreciate any useful information in their resolution.

The less simplistic scale issue alluded to above is as follows. The inside visor should cover the area where the 'outside visor' side plume holes would meet if extended. However they do not, the 'inside visor' helmet hinge area appears much smaller than the 'outside visor' helmet hinge area.

(The side plume holes are the smallest cylinder cut outs of the cylindrical hinge covers - the concentric circles running horizontal. The side plumes holes held at one stage in Castle history Dragon Knight side plumes. The 'inside visor' are those polygons of the Chris Dee Minifig Helmet Visor model 2447 that have been retained in this model. The 'outside visor' contains the new areas of this part, which happen to wrap around the inside visor to form the Knights Visor).

This issue I think remains even when the outside visor cylindrical hinge covers are modelled correctly (which they are not - they have a diameter of 16LDU and not ~15LDU). In summary, there appears to be a scaling problem between the original Minifig Visor and the Knights/Castle Visor.


======================================================================
At Fri Jan 28 11:18:04 2005, a new version of the file was submitted.
Submitted by: rbaxter
Comments:
This part is not complete but has some design issues which I need help addressing. Minifig Castle Visor.dat requires 2 new primitives to be placed in the High Resolution 'P\48' directory (1-5RING5.DAT, and 1-5CYLI.DAT). It should be obvious which areas of the part are incomplete but the main areas being

1. the inside is not finished, it is quite complex to model and will take some time

2. there is probably a major lack of polygons especially in the nose area

3. there are some scale issues. Some are resolvable, others, for example the huge discrepancy between the size of the 'inside visor' and the 'outside visor' (explained below) are less simplistic and I would appreciate any useful information in their resolution.

The less simplistic scale issue alluded to above is as follows. The inside visor should cover the area where the 'outside visor' side plume holes would meet if extended. However they do not, the 'inside visor' helmet hinge area appears much smaller than the 'outside visor' helmet hinge area.

(The side plume holes are the smallest cylinder cut outs of the cylindrical hinge covers - the concentric circles running horizontal. The side plumes holes held at one stage in Castle history Dragon Knight side plumes. The 'inside visor' are those polygons of the Chris Dee Minifig Helmet Visor model 2447 that have been retained in this model. The 'outside visor' contains the new areas of this part, which happen to wrap around the inside visor to form the Knights Visor).

This issue I think remains even when the outside visor cylindrical hinge covers are modelled correctly (which they are not - they have a diameter of 16LDU and not ~15LDU). In summary, there appears to be a scaling problem between the original Minifig Visor and the Knights/Castle Visor.


======================================================================
At Fri Jan 28 11:26:03 2005, a new version of the file was submitted.
Submitted by: rbaxter
Comments:
Mind the comment repeats (the difference between them involves the fact that the x6800 / minifig helmet visor castle part now renders correctly in LDView and PovRay). The part is still incomplete.

======================================================================
At Sat Jan 29 02:14:03 2005, a new version of the file was submitted.
Submitted by: rbaxter
======================================================================
At Sat Jan 29 15:40:04 2005, a new version of the file was submitted.
Submitted by: rbaxter
======================================================================
At Sat Jan 29 15:58:01 2005, a new version of the file was submitted.
Submitted by: rbaxter
======================================================================
At Sun Jan 30 11:52:54 2005 part 'parts/x6800.dat' was renamed to 'parts/x856.dat'.
======================================================================
At Sat Mar 19 05:04:03 2005, a new version of the file was submitted.
Submitted by: rbaxter
======================================================================
At Sun Mar 20 02:32:01 2005, a new version of the file was submitted.
Submitted by: rbaxter
======================================================================
At Sun Mar 20 06:08:01 2005, a new version of the file was submitted.
Submitted by: rbaxter
======================================================================
At Sun Mar 20 06:32:01 2005, a new version of the file was submitted.
Submitted by: rbaxter
======================================================================
At Thu Mar 31 15:36:02 2005, a new version of the file was submitted.
Submitted by: rbaxter
Comments:
Current Changes in thought;

1. Modify the use of uncertified primitives (at the same time fix new overlap bugs in the plume hole and centre bar ontop of Helmet Modern)
2. add further detail to face area
3. complete inside of visor
4. Add Ldraw lines
5. more which I cannot think of just now
6. fix up Ldraw scaling issues with side hinges (concentric discs)


======================================================================
At Thu Mar 31 16:04:02 2005, a new version of the file was submitted.
Submitted by: rbaxter
======================================================================
At Thu Mar 31 16:54:02 2005, the following review was posted:

Reviewer: guyvivan
Certification: hold
Comments:
4-4ring1.dat must be replaced by ring1.dat !

======================================================================
At Sat Apr 2 11:24:02 2005, a new version of the file was submitted.
Submitted by: rbaxter
Existing certification-votes were deleted.
======================================================================
At Sat Apr 2 13:48:02 2005, a new version of the file was submitted.
Submitted by: rbaxter
======================================================================
At Sat Apr 2 14:30:04 2005, the following review was posted:

Reviewer: guyvivan
Certification: hold
Comments:
4-4ring1.dat must be replaced by ring1.dat !


======================================================================
At Tue Apr 5 10:46:02 2005, a new version of the file was submitted.
Submitted by: rbaxter
Comments:
4-4ring1.dat references are now ring1.dat

Existing certification-votes were deleted.
======================================================================
At Tue Apr 5 20:12:02 2005, the following review was posted:

Reviewer: guyvivan
Certification: hold
Comments:
Very nice work, but missing many lines and optional lines.
And many l3p error (vertice not coplanar, row all zero etc...)
And two identical lines (line 41 30 & 72 29).

======================================================================
At Wed Apr 6 02:54:04 2005, the following review was posted:

Reviewer: westrate
Certification: novote
Comments:
since you can't divide either 16 or 48 by 5, why not use the 3/16 ring/cyli primitives?

looks good, though i haven't looked at it in detail.

======================================================================
At Sat Apr 9 04:30:04 2005, a new version of the file was submitted.
Submitted by: rbaxter
Existing certification-votes were deleted.
======================================================================
At Sat Apr 9 04:32:02 2005, a new version of the file was submitted.
Submitted by: rbaxter
======================================================================
At Sat Apr 9 12:50:04 2005, the following review was posted:

Reviewer: rbaxter
Certification: novote
Comments:
Your suggestions have not yet been looked at, I need more time.

Thanks.

======================================================================
At Sun Apr 10 07:00:02 2005, a new version of the file was submitted.
Submitted by: rbaxter
Existing certification-votes were deleted.
======================================================================
At Sun Apr 10 07:36:02 2005, a new version of the file was submitted.
Submitted by: rbaxter
======================================================================
At Sun Apr 10 12:28:02 2005, a new version of the file was submitted.
Submitted by: rbaxter
======================================================================
At Tue Apr 12 12:52:02 2005, a new version of the file was submitted.
Submitted by: rbaxter
Comments:
(same as previous version but without collision between centre bar and standard Minifig Helmet when visor is properly aligned)

======================================================================
At Tue May 10 12:24:06 2005, a new version of the file was submitted.
Submitted by: rbaxter
Comments:
This version is not necessarily better than the previous.

The centre bar has been had its width reduced (from 4 to 3 LDU), and the centre bar has been modified to have an even lesser chance of collision with the main minifig helm - however - the visor nose extends an extra 0.5 LDU out.

======================================================================
At Fri May 13 11:06:38 2005, a new version of the file was submitted.
Submitted by: rbaxter
======================================================================
At Sat May 28 08:16:01 2005, a new version of the file was submitted.
Submitted by: rbaxter
======================================================================
At Sun Jul 3 07:38:01 2005, the following review was posted:

Reviewer: rbaxter
Certification: novote
Comments:
The following .Dat file code demonstrates the x856.dat visor in the context of a large quill (unofficial 4502b.dat) and minifig helmet (official 2446.DAT):

0 Minifig Knights Helmet Black and Grey with Quill
0 Name: KniHelBG.DAT
0 Author: Richard Baxter
0 Unofficial Model
1 4 0 -16 0 1 0 0 0 1 0 0 0 1 4502b.dat
1 8 0 -1.5 -1 1 0 0 0 1 0 0 0 1 x856.dat
1 0 0 0 0 1 0 0 0 1 0 0 0 1 2446.DAT
0

I am ready to take feedback, comments and suggestions on the parts design (I am looking for fatal flaws in scaling etc). I am sorry it has taken so long to get back to your comments. The inside of the part have been purposely not finished yet, and can be if the outside is considered acceptable.

Known issues:
- lines and optional lines
- inside of part
- scaling issues (please point them out so I can take all of them into account during any scaling modifications)

Westrate, could you please explain this if it still applies? "since you can't divide either 16 or 48 by 5, why not use the 3/16 ring/cyli primitives?"

Guyvivan, I have cut down a few l3p errors, but there is still some.

Thanks everyone.





======================================================================
At Sun Aug 28 05:26:02 2005, a new version of the file was submitted.
Submitted by: rbaxter
Comments:
(Part submitted with Basic Edges edge lines added).

Does anyone know why many of the circular 3-4/4-4edge.dat edge lines on this part are not showing in MLCad? Eg lines 296 to 301. If they are changed from colour 24 to another colour, eg colour 2, then they show up.

Existing certification-votes were deleted.
======================================================================
At Sun Aug 28 06:08:13 2005, a new version of the file was submitted.
Submitted by: rbaxter
======================================================================
At Sun Aug 28 08:54:04 2005, the following review was posted:

Reviewer: mikeheide
Certification: novote
Comments:
Edgelines has to be color 16 and not color 24. Thats the reason they are not shown in MLCAD!

======================================================================
At Wed Nov 16 17:50:04 2005, the following review was posted:

Reviewer: fwcain
Certification: novote
No comments were posted with this review.

======================================================================
At Wed Nov 16 18:50:07 2005, the following review was posted:

Reviewer: mikeheide
Certification: hold
Comments:
Edgelines have wrong color.

======================================================================
At Thu Dec 29 16:04:05 2005, the following review was posted:

Reviewer: technog
Certification: hold
Comments:
Mike is correct, color 24 is not to be used on pimitives/parts (type 1), triangles (type 3) or quadrilaterals (type 4) only color 16 should be used for them.

Color 24 is used only for lines (type 2) and conditional lines (type 5), because a primirive may be an edge does not mean use color 24.

An intesting thing happens when you use color 24 on a primitive/part (type 1), things get inverted within the primitive/part, color 16 becomes color 24 and color 24 becomes color 16.

To put it another way, circular 3-4/4-4edge.dat edge lines (primitives) are incoded with color 24, when you use color 24 on these primitives the color 24 inside it becomes color 16.

I hope this clears things up for you Richard.

======================================================================
At Wed Jan 4 07:14:03 2006, a new version of the file was submitted.
Submitted by: rbaxter
Comments:
Thanks technog, mikeheide, and fwcain. I have quickly changed references to the subpart edge files to be colour 16.

Existing certification-votes were deleted.
======================================================================
At Tue Apr 18 15:26:03 2006, the following review was posted:

Reviewer: dulcaoin
Certification: novote
Comments:
change name to 2594.dat


======================================================================
At Fri Apr 21 16:16:26 2006 part 'parts/x856.dat' was renamed to 'parts/2594.dat'.
======================================================================
At Thu May 17 05:06:01 2007, a new version of the file was submitted.
Submitted by: rbaxter
Comments:
1. central bar width has been changed (again) with a more precise width value (remeasured).
2. note optional lines added were generated using OLC.exe [optional line creator software]

OLC has the following known limitations:
a) OLC creates optional lines where two polygons are drawn together to create a flat face - there is no edge in this case and therefore this case should be excluded
b) OLC does not create optional lines where an edge is not represented by exactly two polygons, (Eg if multiple polygons are stacked up to represent a single edge, an optional line will not be drawn here).
c) it probably has other issues as the current version has only been through limited testing (a few hours max), and only for the purpose of generating optional lines for my own parts

(if anyone is interesting in this SW please let me know - possible there is an ldraw.org place to upload it?)




Existing certification-votes were deleted.
======================================================================
At Fri May 18 00:30:03 2007, a new version of the file was submitted.
Submitted by: rbaxter
======================================================================
At Wed Jun 13 08:22:03 2007, a new version of the file was submitted.
Submitted by: rbaxter
Comments:
optional lines have been generated with a newer version of OLC.exe:
a) this has been addressed using an unverified method
[if lineA(p1, p2) and lineB(p3,p4) of the optional line (p1,p2,p3,p4) intersect at the same xyz location on the xy, yz, and zx planes, then lineA and lineB are assumed to lie on the same plane in 3D space, and the optional line is therefore assumed to have been created between two polygons which when drawn together create a flat face...]
b) no change
c) fixed an issue resulting in identical optional lines being added

======================================================================
At Fri May 22 11:58:04 2009, the following review was posted:

Reviewer: Steffen
Certification: hold
Comments:
- matrix "all zero" errors
- lines should not use color 16
- header is misformatted

======================================================================
At Mon Feb 8 21:15:50 2010, a new version of the file was submitted.
Submitted by: mikeheide
Comments:
Corrected all mentioned errors. All other issues with this file still exists.

Existing certification-votes were deleted.
======================================================================
At Mon Feb 8 23:35:03 2010, the following review was posted:

Reviewer: Steffen
Certification: novote
Comments:
maybe needs a "Needs Work" suffix

======================================================================
At Mon Feb 8 23:35:03 2010, the following review was posted:

Reviewer: Steffen
Certification: novote
Comments:
I also suggest putting the necessary TODOs as a comment
into the file so they won't get lost when this file leaves the PT.

======================================================================
At Wed Sep 29 08:40:05 2010, a new version of the file was submitted.
Submitted by: rbaxter
Comments:
Fixed Known issue:
- inside of part

As result of this fix, some of Mikeheide's 8 Feb 2010 changes have been lost, and need to be re-performed. Most likely this relates to the following;
- matrix "all zero" errors
- [there also appears to be a significant number of additional polys missing which are noticeable with a WinDiff comparison - and have not investigated what these are as yet]

Chances are another update will arrive soon.

Cheers,

Richard


Existing certification-votes were deleted.
======================================================================
At Wed Sep 29 09:10:04 2010, a new version of the file was submitted.
Submitted by: rbaxter
Comments:
(with non-official primitives individually inlined using LD Design Pad - note the LDAddOn inline function does not appear to be working on this system, although I always managed to get it to work in the past...)

======================================================================
At Sat Oct 2 13:35:11 2010, a new version of the file was submitted.
Submitted by: rbaxter
Comments:
minor changes;
- updated geometry for inside of part
- optional lines added for non-official primitives

======================================================================
At Sun Oct 3 13:25:08 2010, the following review was posted:

Reviewer: MagFors
Certification: novote
Comments:
I realise that you have been working on this part for quite some time now, and we know that LUT-data isn't allways correct,
but have you made a comparision with the LUT-data here:
http://www.holly-wood.it/tmp/LEGODraw/m2594.dat ?
I mean that this design has some major problems.
If placed, in default position, on a helmet 2446, the minifig can not see through the visor.
It could be tilted about 5 degrees backwards, but then the cylinder on the top isn't placed correctly.
The circular features on the side of the visor seems to be to big and misplaced.
I have uploaded a picture to better illustrate my thoughts here:
http://www.brickshelf.com/gallery/MagFors/LDraw/pictures/Errors/2594_error.gif
I would also like to have the origin in the rotationpoint of the visor.

======================================================================
At Sun Oct 3 23:25:05 2010, the following review was posted:

Reviewer: rbaxter
Certification: novote
Comments:
This is exactly the kind of detailed analysis I have been after for sometime now - Thank you.

This may take some time, and I cannot guarantee I will be able to resolve everything in this design but I will at least try;
- I have noticed the discrepancy with the size of the circle features on the side but had not been able to resolve it (I could not find a fault in my calculations but it was obviously out)
- the part is currently designed at a 7 degree tilt, but is then rotated by 7 degrees before publishing (and inlined) [NB the hollow cylinder / plume shaft at the top is purposely pre-rotated at this 7 degree angle such that it returns to vertical]; this is due to a discrepancy I noted after constructing the original design
- I had noticed an issue with the visor holes before, but had never investigated there being a possible discrepancy between LDView and LDD rendering (is this what you are proposing?) - NB I use both LDView and LDD/MLCAD for design and review
- the origin is planned to be moved to the rotation point of the visor once everything is sorted

Can I also please ask what is m2594.dat? I have been away from parts design for sometime now - cheers,

Richard


======================================================================
At Mon Oct 4 21:15:28 2010, the following review was posted:

Reviewer: MagFors
Certification: novote
Comments:
You can read about it here:
http://www.ldraw.org/wiki/index.php/L(EGO)Draw_parts

Part m2594.dat is placed here:
http://www.ldraw.org/wiki/index.php/L(EGO)Draw_Third_Batch_New_Parts_Chart

These files basically represents what you see in LDD.

======================================================================
At Sat Oct 9 03:40:03 2010, the following review was posted:

Reviewer: rbaxter
Certification: novote
Comments:
Thanks for this information.

I have reviewed m2594.dat, and although I could probably modify the existing part accordingly (visor eye holes in particular), it may be worth moving to m2594.dat instead?

======================================================================
At Sun Dec 12 12:55:03 2010, the following review was posted:

Reviewer: Steffen
Certification: novote
Comments:
suggest BFCing


======================================================================
At Sun May 22 09:30:04 2011, the following review was posted:

Reviewer: Steffen
Certification: novote
Comments:
WARNING "2594.dat" Line 68: Y column all zeros: 1 16 0 -14.5047 0.7694 2 0 0 0 0 0.0018 0 0 2.0148 4-4ring1.dat
WARNING "2594.dat" Line 69: Y column all zeros: 1 16 0 -8.4657 0.7646 2 0 0 0 0 0.0018 0 0 2.0148 4-4ring1.dat
WARNING "2594.dat" Line 87: Row 0 all zeros: 1 16 21 12 1.4624 0 0 0 2 0 -0.2437 0.2437 0 2 4-4ring1.dat
WARNING "2594.dat" Line 88: Row 0 all zeros: 1 16 20 12 1.4624 0 0 0 4 0 -0.4875 0.4875 0 4 4-4ring1.dat
WARNING "2594.dat" Line 89: Row 0 all zeros: 1 16 17 12 1.4624 0 0 0 8 0 -0.975 0.975 0 8 3-4disc.dat
WARNING "2594.dat" Line 354: Row 0 all zeros: 1 16 17 12 1.4624 0 0 0 2 0 -0.2437 0.2437 0 2 4-4edge.dat
WARNING "2594.dat" Line 355: Row 0 all zeros: 1 16 21 12 1.4624 0 0 0 2 0 -0.2437 0.2437 0 2 4-4edge.dat
WARNING "2594.dat" Line 356: Row 0 all zeros: 1 16 21 12 1.4624 0 0 0 4 0 -0.4875 0.4875 0 4 4-4edge.dat
WARNING "2594.dat" Line 357: Row 0 all zeros: 1 16 20 12 1.4624 0 0 0 4 0 -0.4875 0.4875 0 4 4-4edge.dat
WARNING "2594.dat" Line 440: Row 0 all zeros: 1 16 -21 12 1.4624 0 0 0 2 0 -0.2437 0.2437 0 2 4-4ring1.dat
WARNING "2594.dat" Line 441: Row 0 all zeros: 1 16 -20 12 1.4624 0 0 0 4 0 -0.4875 0.4875 0 4 4-4ring1.dat
WARNING "2594.dat" Line 442: Row 0 all zeros: 1 16 -17 12 1.4624 0 0 0 8 0 -0.975 0.975 0 8 3-4disc.dat
WARNING "2594.dat" Line 707: Row 0 all zeros: 1 16 -17 12 1.4624 0 0 0 2 0 -0.2437 0.2437 0 2 4-4edge.dat
WARNING "2594.dat" Line 708: Row 0 all zeros: 1 16 -21 12 1.4624 0 0 0 2 0 -0.2437 0.2437 0 2 4-4edge.dat
WARNING "2594.dat" Line 709: Row 0 all zeros: 1 16 -21 12 1.4624 0 0 0 4 0 -0.4875 0.4875 0 4 4-4edge.dat
WARNING "2594.dat" Line 710: Row 0 all zeros: 1 16 -20 12 1.4624 0 0 0 4 0 -0.4875 0.4875 0 4 4-4edge.dat


Header needs cleanup

======================================================================
At Mon Jul 25 21:30:11 2011, the following review was posted:

Reviewer: Steffen
Certification: hold
Comments:
contains inlining relicts

======================================================================
At Sun Sep 18 11:45:11 2011, the following review was posted:

Reviewer: Steffen
Certification: hold
Comments:
keywords lack comma separator

======================================================================
At Sun Sep 18 11:50:25 2011, the following review was posted:

Reviewer: Steffen
Certification: hold
Comments:
(keeping hold)

do you want to know why I just stumbled over this file?
because I grepped for the word "chicken" to find all
recently uploaded chicken parts on the parts tracker.
and guess what? I found this file, haaaahaaaa.....

I never expected it to contain the word "chicken", but it does :-DDDDD

======================================================================
At Thu Aug 9 13:05:10 2012 a Parts Tracker Admin edited the header.
======================================================================
At Thu Aug 9 13:05:10 2012 a Parts Tracker Admin edited the header.
======================================================================
At Sat Nov 16 16:55:01 2013, the following review was posted:

Reviewer: mikeheide
Certification: hold
Comments:
I am sure the keyword "minifig castle helmet knight visor" should be many keywords like "minifig, castle, helmet, knight, visor"
therefore my hold

======================================================================
At Sat Nov 16 21:10:05 2013, the following review was posted:

Reviewer: MagFors
Certification: novote
Comments:
And that would also be a hold vote.
All words except "knight" are already in the description.


======================================================================
At Sat Jan 4 10:25:05 2014, a new version of the file was submitted.
Submitted by: mikeheide
Comments:
Used WINZ on this file.
Still two formal error exists:
Line 73: Matrix all zero found. 1 16 0 -14.5047 0.7694 2 0 0 0 0 0.0018 0 0 2.0148 4-4ring1.dat
Line 74: Matrix all zero found. 1 16 0 -8.4657 0.7646 2 0 0 0 0 0.0018 0 0 2.0148 4-4ring1.dat
Also not all BFC issues are solved.

Existing certification-votes were deleted.
======================================================================
At Sun Jan 5 14:40:03 2014, the following review was posted:

Reviewer: MagFors
Certification: hold
Comments:
This design has some major issues, and should not leave the part tracker until they're corrected.
Please see my review above:
http://www.brickshelf.com/gallery/MagFors/LDraw/pictures/Errors/2594_error.gif

IMO, it should be replaced by LDD-data.

======================================================================
At Sun Jan 5 15:00:08 2014, the following review was posted:

Reviewer: mikeheide
Certification: novote
Comments:
I think adopting the LDD part will be the quickest way to release this part, as the construction from the beginning has some faults.
I do not know how much our rbaxter has already spend to make this part working. I guess it needs to be counted in days. I think we need to honor his work in some kind but do not know how.

======================================================================
At Sat Jun 28 11:50:05 2014, the following review was posted:

Reviewer: Steffen
Certification: hold
Comments:
WARNING "2594.dat" Line 72: Y column all zeros: 1 16 0 -14.5047 0.7694 2 0 0 0 0 0.0018 0 0 2.0148 4-4ring1.dat
WARNING "2594.dat" Line 73: Y column all zeros: 1 16 0 -8.4657 0.7646 2 0 0 0 0 0.0018 0 0 2.0148 4-4ring1.dat



© 2001-2014 LDraw.org, see Legal Info for details. This website is powered by Peeron.com.

LEGO® is a registered trademark of the LEGO Group, which does not sponsor, endorse, or authorize this site. Visit the official Lego website at http://www.lego.com/.
The LDraw system is a completely unofficial, community run free CAD system which represents official parts produced by the LEGO company.
The LDraw Parts Tracker is maintained and developed by voluntary members of the LDraw organisation.